Konica Minolta bizhub C35P User Manual

Configuration Menu Overview 4-8
2Select PRINT or DELETE, and then press the Menu/Select key.
If PRINT was selected, continue with step 3.
If 
DELETE was selected, continue with step 5.
3Press the   and   keys to specify the number of copies to be printed. 
(Settings: 
1 to 999; Default: 1)
4Press the Menu/Select key.
Printing begins.
5Select YES or NO.“
User name”
If no print jobs have been stored on the hard disk, 
NO STORED JOB appears.
, 
Press until the desired 
user name appears.Desired user name...

Configuration Menu Overview4-9
6Press the Menu/Select key.
If 
YES was selected, the print job is deleted. 
If 
NO was selected, the PRINT/DELETE selection screen appears 
again.
Entering the Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a 
screen for entering the password appears. Follow the procedure described 
below to type in the four-digit password specified from the printer driver.
1Press the   to increase or the   to decrease the first digit of the pass-
word.
2Press...

Configuration Menu Overview 4-10
PRINT MENU
With this menu, printer information, such as the configuration page, can be 
printed.
* This menu item appears only if an optional hard disk kit HD-P03 or a 
CompactFlash card is installed.
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the contents of 
PRINT MENU to 
be displayed.
For details on 
LOCK PANEL, refer to “SYS DEFAULT MENU” on 
page 4-49.
All factory default values are shown in bold.
CONFIGURA-...

Configuration Menu Overview4-11
FONT LIST POST
SCRIPTSettingsPRINT/CANCEL
Prints the PostScript font list.
PCLSettingsPRINT/CANCEL
Prints the PCL font list.
MENU MAPSettingsPRINT/CANCEL
Prints the menu map.
DIRECTORY 
LISTSettingsPRINT/CANCEL
Prints the directory list of the hard disk or a CompactFlash 
card.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 4-12
PAPER MENU
With this menu, the paper used for printing can be managed.
PAPER TYPE
DEFAULT TRAY
TRAY1PAPER SIZE
CUSTOM SIZE*
TRAY2
PAPER TYPE
PAPER SIZE
TRAY3***
PAPER SOURCE
COLLATE****
DUPLEX
COPIES
PAPER TYPE
PAPER SIZE
PAPER MENU
TRAY CHAINING
TRAY MAPPING
LOGICAL TRAY
0
TRAY MAPPING
MODE
LOGICAL TRAY
9
CUSTOM SIZE**
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview4-13
* This menu item appears only when you select CUSTOM from the 
TRAY1/PAPER SIZE menu.
** This menu item appears only when you select 
CUSTOM from the 
TRAY2/PAPER SIZE menu.
*** This menu item appear only if the optional lower feeder unit 
PF-P09 is installed.
**** This menu item appears only if an optional hard disk kit HD-P03 or 
a CompactFlash card is installed.
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the...

Configuration Menu Overview 4-14
All factory default values are shown in bold.
PAPER 
SOURCEDEFAULT 
TRAYSettingsTRAY1/TRAY2/TRAY3
Select the setting for the default tray.
TRAY 3 appears only if the optional lower 
feeder unit PF-P09 is installed.
TRAY1 PAPER 
SIZESettingsANY, LETTER, LEGAL, 
EXECUTIVE, A4, A5, A6, 
B5(JIS), B6(JIS), GOVT 
LETTER
, STATEMENT, 
FOLIO, SP FOLIO, UK 
QUARTO
, FOOLSCAP, GOVT 
LEGAL
, 16K, PHOTO 4×6, 
KAI 16, KAI 32, ENV C6, 
ENV DL, ENV MONARCH, 
ENV CHOU#3, ENV CHOU#4,...

Configuration Menu Overview4-15
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 1.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–120V model: 216 mm
–All other models: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–120V model: 8.50 inches
–All other models: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356...

Configuration Menu Overview 4-16
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2/SGL SIDE 
ONLY/SPECIAL PAPER
Select the setting for the type of paper 
loaded into Tray 1.
TRAY2 PAPER 
SIZESettingsANY/LETTER/EXECUTIVE/
A4/A5/A6/B5(JIS)/
B6(JIS)/GOVT LETTER/
STATEMENT/UK QUARTO/
16K/PHOTO 4×6/KAI 16/
KAI 32/CUSTOM
Select the setting for the size of paper 
loaded into Tray 2.
The default setting for 120V model 
is 
LETTER. The default...

Configuration Menu Overview4-17
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 2.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–120V model: 216 mm
–All other models: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–120V model: 8.50 inches
–All other models: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 297...