Konica Minolta bizhub C35P User Manual

Configuration Menu Overview 4-38
CMYK 
DENSITYCYAN/
MAGENTA/
YELLOW/
BLACKHIGH-
LIGHT
Settings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
highlight color in 
images can be 
adjusted.
MIDDLESettings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
middle color in 
images can be 
adjusted.
SHADOWSettings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
shadow color in 
images can be 
adjusted.
COLOR 
SEPARA-
TIONSettingsON/OFF
If ON is selected, color separation are performed. The 
contents of a color page is separated...

Configuration Menu Overview4-39 MEMORY DIRECT
With this menu, settings for “memory direct” function can be specified.
For details on memory direct, refer to “Memory Direct” on page 5-2.
This menu item appears when an optional hard disk kit HD-P03 or a 
CompactFlash card is installed, and 
INTERFACE MENU/MEMORY 
DIRECT 
is set to ENABLE.
This menu item does not appear if public user access has not been 
permitted through authentication settings. For details on the authenti-
cation settings, refer to the...

Configuration Menu Overview 4-40
Select this setting to output a file.
Settings
CANCEL
Select this setting to stop outputting and to return to the file list.
Letter/
A4SettingsLETTER, LEGAL, EXECUTIVE, A4, 
A5, A6, B5(JIS), B6(JIS), GOVT 
LETTER
, STATEMENT, FOLIO, SP 
FOLIO
, UK QUARTO, FOOLSCAP, 
GOVT LEGAL, 16K, PHOTO 4×6, KAI 
16
, KAI 32, ENV C6, ENV DL, ENV 
MONARCH
, ENV CHOU#3, ENV 
CHOU#4
, B5(ISO), ENV #10, 
JPOST, JPOST-D, 8 1/8×13 1/4, 8 
1/2×13 1/2, CUSTOM
Change the size of the paper.
The...

Configuration Menu Overview4-41
COLLATESettingsON/OFF
Select whether to collate the copies.
If 
ON is selected, collated printing is performed.
If 
OFF is selected, collated printing is not performed.
This menu item appears only if the optional 
hard disk kit HD-P03 or a CompactFlash card 
is installed.
TYPE 
OF 
FILESSettingsPDF,XPS,JPEG,TIFF/PDF,XPS
Select the type of files to be displayed.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 4-42
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK*
DEFAULT 
GATEWAY*
HTTP*
FTP*
TCP/IPENABLE
IP ADDRESS*
JOB TIMEOUT
ETHERNET
INTERFACE MENU
MEMORY 
DIRECT**
ARP/PING*
TELNET*
BONJOUR*
DYNAMIC DNS*
IPP*
DHCP*
BOOTP*
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview4-43
*This menu item appears when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit HD-P03 or a 
CompactFlash card is installed.
*** This menu item appears when 
INTERFACE MENU/ETHERNET/
TCP/IP/RAW PORT/ENABLE
 is set to YES.
**** This menu item appears when 
INTERFACE MENU/ETHERNET/
TCP/IP/IPv6/ENABLE
 is set to YES.
SNMP*
WSD PRINT*
IPSEC*
ENABLE
ENABLE
SLP*
SMTP*
NETWARE
APPLETALK
SPEED/
DUPLEX
IP ADDRESS...

Configuration Menu Overview 4-44
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the contents of 
INTERFACE 
MEMU
 to be displayed.
For details on 
LOCK PANEL, refer to “SYS DEFAULT MENU” on 
page 4-49.
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is...

Configuration Menu Overview4-45
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is...

Configuration Menu Overview 4-46
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, Dynamic 
DNS is enabled.
If 
NO is selected, Dynamic 
DNS is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
If HTTP/ENABLE is set 
to 
NO, IPP cannot be 
set.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, Raw Port 
is enabled.
If 
NO is selected, Raw Port is 
disabled.
BIDI-
REC-
TIONALSettingsON/OFF
If ON is selected, Raw port 
transmissions are...

Configuration Menu Overview4-47
SNMP ENABLESettingsYES/NO
If YES is selected, SNMP is 
enabled.
If 
NO is selected, SNMP is 
disabled.
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD print 
is enabled.
If 
NO is selected, WSD print is 
disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPsec is 
enabled.
If 
NO is selected, IPsec is dis-
abled.
IP 
ADDRESS 
FILTERACCESS 
PER-
MIS-
SIONSettingsENABLE/
DISABLE
Select whether to enable or 
disable access granting.
If 
ENABLE is selected,...