Konica Minolta bizhub C35P User Manual

Configuration Menu Overview 4-68
GLOSSY 
2Settings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for duplex 
(double-sided) printing of 
glossy 2 media.
IMG 
ADJ 
THICKCYANSettings-5-0-5
Finely adjusts the density of cyan for 
images printed on thick paper.
MAGENTASettings-5-0-5
Finely adjusts the density of magenta for 
images printed on thick paper.
YELLOWSettings-5-0-5
Finely adjusts the density of yellow for 
images printed on thick paper.
BLACKSettings-5-0-5
Finely adjusts the density of black...

Configuration Menu Overview4-69
THICK 
MODESettingsQUALITY MODE / SPEED MODE
In order to prevent toner from clogging within the 
developer unit as a result of it being driven at 
half-speed, select the timing for driving the devel-
oper unit at full speed for a fixed length of time when 
thick paper is being fed.
QUALITY MODE: While printing on thick paper, print-
ing is periodically paused, and the developer unit is 
driven at full speed for a fixed length of time. Since 
printing is paused, the quality...

Configuration Menu Overview 4-70
SUP-
PLIESRE-
PLACETRANS. 
BELTSettingsYES/NO
Resets the transfer belt counter.
TRANS. 
ROLLERSettingsYES/NO
Resets the transfer roller counter.
FUSER 
UNITSettingsYES/NO
Resets the fuser unit counter.
QUICK 
SET-
TINGUPDATE 
SETTINGSetupEXECUTE / CANCEL
Update printer settings according to the 
printer setting definition file stored in the 
USB memory device.
If EXECUTE is selected, the printer set-
tings are updated.
If CANCEL is selected, the settings are 
not...

Configuration Menu Overview4-71 SERVICE MENU
With this menu, the service representative can adjust the printer and perform 
maintenance operations. This menu cannot be used by the user.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 4-72
Downloaded From ManualsPrinter.com Manuals 

Memory Direct
Downloaded From ManualsPrinter.com Manuals 

Memory Direct 5-2
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be 
printed by plugging the USB memory device into the printer.
Memory direct can be used only if the optional hard disk kit HD-P03 or 
a CompactFlash card is installed.
Encrypted USB memory devices are not supported.
For details on specifying settings with the control panel, refer to “MEM-
ORY DIRECT” on page 4-39.
Printing From a Connected USB Memory Device
1Plug the USB memory device 
into the USB memory...

Memory Direct5-3
4Select PRINT, and then press the Menu/Select key.
When printing is finished, the status screen appears again.
Settings can be specified for the paper size, duplex printing, num-
ber of copies and collating.
Do not unplug the USB memory device from the USB memory port 
during memory direct printing.
Downloaded From ManualsPrinter.com Manuals 

Memory Direct 5-4
Downloaded From ManualsPrinter.com Manuals 

Using Media
Downloaded From ManualsPrinter.com Manuals