Konica Minolta bizhub C10P User Manual

Loading Media 59
Loading Media 
How do I load media?
Take off the top and bottom sheets of a 
ream of paper. Holding a stack of approx
-
imately 200 sheets at a time, fan the 
stack to prevent static buildup before 
inserting it in a tray.
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of 
media types, it is not intended to print exclusively on a single media 
type except plain paper. Continuous printing on media other than plain 
paper (such as...

Loading Media 60
2Slide the media guides to pro-
vide more space between them.
3Load the paper face up in the 
tray.
Do not load paper above 
the 
 mark. Up to 200 
sheets (80 g/m2 [22 lb]) of 
plain paper can be 
loaded into the tray at 
one time.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 61
4Slide the media guides against 
the edges of the paper.
5Close the front panel of Tray 1 
tray, and then reattach the lid.
Other Media
When loading media other than plain paper, set the media mode (for exam-
ple, Envelope, Glossy, Label, Thick Stock or Transparency) in the driver for 
optimum print quality.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 62
Loading Envelopes
1Remove the lid from Tray 1, and 
then open the front panel of 
Tray
 1.
2Remove any media from the tray.
3Slide the media guides to pro-
vide more space between them.
4Load the envelopes flap side 
down in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other
-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be...

Loading Media 63
For envelopes with the 
flap along the long edge, 
load the envelopes with 
the flap toward the left of 
the printer.
5Slide the media guides against 
the edges of the envelopes.
6Close the front panel of Tray 1 
tray, and then reattach the lid.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 64
7Pull the lever, and then open the 
top cover.
If there is paper in the 
output tray, remove it. 
Fold up the output tray 
before opening the top 
cover.
Do not touch the transfer 
belt.
8Raise the fuser separator levers 
on the fuser unit.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 65
Note
Since a media misfeed or 
decreased print quality may 
occur, be sure to return the levers 
on the fuser unit to the setting for 
plain paper before printing on 
media other than envelopes.
 
 
 
 
 
 
 
 
 
 
 
 
9Carefully close the top cover.
Before printing on media 
other than envelopes, be 
sure to move the fuser 
separator levers on the 
fuser unit to its original 
position.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 66
Loading Labels/Postcard/Thick Stock/Glossy Stock and 
Transparency
1Remove the lid from Tray 1, and 
then open the front panel of 
Tray
 1.
2Remove any media from the tray.
3Slide the media guides to pro-
vide more space between them.
4Load the media face up in the 
tray.
Up to 50 sheets can be 
loaded into the tray at 
one time.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 67
5Slide the media guides against 
the edges of the media.
6Close the front panel of Tray 1 
tray, and then reattach the lid.
Tray 2
Loading Plain Paper
1Pull out Tray 2 as far as possi-
ble.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 68
2Lift up Tray 2 to remove it.
3Remove the lid from Tray 2.
4Press down the media pressure 
plate to lock it into place.
Downloaded From ManualsPrinter.com Manuals