Konica Minolta bizhub C10P User Manual

Configuration Menu Overview 29
Entering the Password
In order to print or delete a secured job, the four-digit password specified from 
the printer driver must be entered. Follow the procedure described below to 
type in the four-digit password specified from the printer driver.
1Press the Up and Down keys to increase or decrease the first digit of the 
password.
2Press the Right key to move the cursor to the next digit.
3Press the Up and Down keys to increase or decrease the second digit of 
the...

Configuration Menu Overview 30
PRINT MENU
With this menu, printer information, such as the configuration page and the 
demo page, can be printed.
All factory default values are shown in bold.
MENU MAPSettingsYES/NO
Prints the menu map.
CONFIGURA-
TION 
SettingsYES/NO
Prints the configuration page.
STATISTICS 
PAGESettingsYES/NO
Prints the statistics page such as the number of pages 
printed.
FONT LISTPOST 
SCRIPT
SettingsYES/NO
Prints the PostScript font list.
PCLSettingsYES/NO
Prints the PCL font...

Configuration Menu Overview 31
PAPER MENU
With this menu, the media used for printing can be managed.
* This menu item appears only if the duplex option is installed. 
** These menu items appear only if the optional lower feeder unit is 
installed.
 
MEDIA TYPE
 
TRAY 1 MODE
 
TRAY 1 
MEDIA SIZE
 
MEDIA TYPE
 
TRAY 2** 
MEDIA SIZE
 
CUSTOM SIZE
 
AUTO CONTINUE
 
INPUT TRAY
 
PAGE RECOVERY
 
DUPLEX*
 
ORIENTATION
 
LENGTH (xx)
 
WIDTH (xx)
 
PAPER MENU
 
TRAY CHAINING**
 
MAP**
 
LOGICAL TRAY 0
 
MODE...

Configuration Menu Overview 32
All factory default values are shown in bold.
INPUT 
TRAYTRAY 1 
MODESettingsAUTO/CASSETTE
When printing from Tray 1, select whether the paper 
size and paper type set from the printer driver or the 
MEDIA SIZE and MEDIA TYPE settings set by 
selecting 
PAPER MENU/INPUT TRAY/TRAY 1 
in the control panel have priority.
If AUTO is selected, the printer driver settings have 
priority during printing.
If CASSETTE is selected, printing is performed 
when the printer driver...

Configuration Menu Overview 33
TRAY 2MEDIA 
SIZESettingsLETTER/A4
Select the setting for the size of paper 
loaded into Tray 2.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
MEDIA 
TYPESettingsPLAIN PAPER/
LETTERHEAD
Select the setting for the type of paper 
loaded into Tray 2.
CUSTOM 
SIZEWIDTH 
(xx)
Settings92-216 mm  
(3.63-8.50 in.)
Specify the width of the custom-sized 
paper loaded into Tray 1.
On the model for North America, 
the settings...

Configuration Menu Overview 34
TRAY 
CHAININGSettingsYES/NO
If YES is selected and the specified paper tray runs 
out of paper during printing, a paper tray loaded with 
paper of the same size is automatically selected so 
printing can continue.
If NO is selected and the specified paper tray runs 
out of paper, printing stops.
MAPMODESettingsON/OFF
Select whether or not the Tray Mapping 
function is used.
LOGI-
CAL 
TRAY 
0-9
SettingsPHYSICAL TRAY 1/ 
PHYSICAL TRAY 2
Specify whether jobs received from...

Configuration Menu Overview 35
QUALITY MENU
With this menu, settings for the print quality can be specified.
 
BLACK
 
CYAN
 
MAGENTA
 
TONER OUT ACTION
 
REPLACE TONER
 
AIDC 
REQUEST AIDC
 
QUALITY MENU
 
YELLOW
 
BLACK
 
CYAN
 
MAGENTA
 
YELLOW
 
DENSITY CONTROL
 
MODE
 
TONER LOW ACTION
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 36
All factory default values are shown in bold.
REPLACE 
TONERBLACKSettingsYES/NO
When YES is selected, the carousel rotates to the 
black toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a Toner Cartridge” on page 78.
CYANSettingsYES/NO
When YES is selected, the carousel rotates to the 
cyan toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a Toner...

Configuration Menu Overview 37
AIDCREQUEST 
AIDCSettingsNO/YES
If YES is selected, image adjustments are 
performed.
MODESettingsON/OFF
If ON is selected, the image adjustments are 
applied.
If OFF is selected, image adjustments are not 
applied.
DENSITY 
CONTROLBLACKSettings1/2/3/4/5
Adjust the density of the black toner to one of five 
levels.
If 1 is selected, the density is at its lightest level. If 5 
is selected, the density is at its darkest level.
CYANSettings1/2/3/4/5
Adjust the density of the...

Configuration Menu Overview 38
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
 
IP ADDRESS
 
DEFAULT ROUTER
 
SUBNET MASK
 
FRAME TYPE
 
NAME
 
TCPIP 
ENABLE
 
DHCP/BOOTP
 
IPX/SPX
 
ETHERTALK
 
ETHERNET SPEED
 
ETHERNET
 
INTERFACE MENU
 
ENABLE HTTP
 
ENABLE AUTO IP
 
NETZONE
 
NETZONE2
 
NAME2
 
PS PROTOCOL
Downloaded From ManualsPrinter.com Manuals