Konica Minolta bizhub 600 User Manual

							2Before Making Copies
2-12 bizhub 750/600
Before Making Copies
Chapter 2
Post Inserter PI-501
1 2 3 4
5
6
No.Part NameDescription
1 Post inserter control panel Operate when manually using the finisher (p. 3-81)
2 Upper unit release lever Raised to slide the upper unit of the post inserter to 
the left when clearing paper misfeeds
3 Upper tray paper guide Slide to fit the size of paper being loaded when 
loading with cover sheets.
4 Upper tray Load with cover sheets.
5 Lower tray Load with cover sheets.
6 Lower tray paper guide Slide to fit the size of paper being loaded when 
loading with cover sheets.
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies2
bizhub 750/600 2-13
Before Making Copies
Chapter 2
Z Folding Unit ZU-602
16 5 43
2
No.Part NameDescription
1 Front door of the Z folding unit Opened when clearing paper misfeeds and when 
emptying the punch dust box
2 Inlet lever Opened when clearing paper misfeeds
3 Knob Turned when clearing paper misfeeds
4 Handle Used to pull out the unit when clearing paper mis-
feeds
5 paper misfeeds Opened when clearing paper misfeeds
6 Punch dust box Removed when emptying punch dust that has ac-
cumulated from using the Punch settings (See 
p. 9-17.)
Downloaded From ManualsPrinter.com Manuals 
						

							2Before Making Copies
2-14 bizhub 750/600
Before Making Copies
Chapter 2
Shift Tray SF-601
12
No.Part NameDescription
1 Exit tray Collects printed pages
2 Upper cover Opened when clearing paper misfeeds
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies2
bizhub 750/600 2-15
Before Making Copies
Chapter 2
Control Panel
No.Part NameDescription
1 [Power  Save]  key Press to enter Low Power mode. While the machine 
is in Low Power mode, the indicator on the [Power 
Save] key lights up in green and the touch panel 
goes off. To cancel Low Power mode, press the 
[Power Save] key again.
2 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the 
Touch Panel.(See p. 2-18.)
3 [Access] key If user authentication or account track settings 
have been applied, press this key after completing 
authentication in order to use this machine.
In addition, press this key again when you have fin-
ished using the machine to display the authentica-
tion screen.
4 [Box] key Press to enter Box mode.
While the machine is in Box mode, the indicator on 
the [Box] key lights up in green. For details, refer to 
the Box Operations of the bizhub 750/600 User’s 
Guide.
5 [Fax] key Press to enter Fax mode.
While the machine is in Fax mode, the indicator on 
the [Fax] key lights up in green.
For details, refer to the Facsimle Operations and 
the Network Fax Operations of the bizhub 750/600 
User’s Guide.
6 [Scan] key Press to enter Scan mode. 
While the machine is in Scan mode, the indicator on 
the [Scan] key lights up in green. 
For details, refer to the Network Scanner 
Operations of the bizhub 750/600 User’s Guide.
1234 5 67
8
9
10
11
14 13 15 17
161819 20 21 22 2312
Downloaded From ManualsPrinter.com Manuals 
						

							2Before Making Copies
2-16 bizhub 750/600
Before Making Copies
Chapter 2
7 [Copy] key Press to enter Copy mode. 
While the machine is in Copy mode, the indicator 
on the [Copy] key lights up in green.
8 [Reset] key Press to clear all settings (except programmed 
settings) entered in the control panel and touch 
panel.
9 [Interrupt] key Press to enter Interrupt mode. 
While the machine is in Interrupt mode, the 
indicator on the [Interrupt] key lights up in green 
and the message “Now in Interrupt mode.” appears 
on the touch panel. To cancel Interrupt mode, press 
the [Interrupt] key again.
10 [Stop] key Press the [Stop] key during copying to stop the 
copy operation.
11 [Start] key Press to start copying. When this machine is ready 
to begin copying, the indicator on the [Start] key 
lights up in green. If the indicator on the [Start] key 
lights up in orange, copying cannot begin.
Press this key to continue a stopped job. (See 
p. 11-2.)
12 Main Power indicator Lights up in green when the machine is turned on
13 Data indicator Flashes in green while a print job is being received
Lights up in green while a print job is queued to be 
printed or while it is printing.
14 [Proof Copy] key Press to print a single sample copy to be checked 
before printing a large number of copies. (See 
p. 4-5.)
15 Keypad Use to type in various values, such as the number 
of copies to be produced and the zoom ratio.
16 [C] (clear) key Press to erase a value (such as the number of 
copies, a zoom ratio, or a size) entered using the 
keypad or touch panel.
17 [Mode Check] key Press to display screens showing the specified 
settings.
18 [Utility/Counter] key Press to display the Utility screen and allow the 
meter count to be checked.
19 [Mode  Memory]  key Press to register the desired copy settings as a pro-
gram or to recall a registered copy program. (See 
p. 4-14.)
20 Contrast dial Use to adjust the contrast of the touch panel.
21 [Enlarge Display] key Press to enter Enlarge Display mode.
22 [Accessibility] key Press to display the screen for specifying user 
accessibility functions.
23 [Help]  key Press to display the Main Help Menu screen, where 
descriptions of the various functions and details of 
operations can be displayed. (See p. 4-17.)
No.Part NameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies2
bizhub 750/600 2-17
Before Making Copies
Chapter 2
2
Reminder 
Do not apply extreme pressure to the touch panel, otherwise it may be 
scratched or damaged.
Never push down on the touch panel with force, and never use a hard or 
pointed object to make a selection in the touch panel.
Downloaded From ManualsPrinter.com Manuals 
						

							2Before Making Copies
2-18 bizhub 750/600
Before Making Copies
Chapter 2
Basic Settings Screen (Basic Screen)
When the machine is ready to begin making copies after being turned on, the 
Basic screen appears.
To activate a function or to select a setting, lightly touch the desired button 
in the touch panel.
TYPE1
TYPE2
12
3
4
5
6 7 8 9 10
23
4
5
10
6
7
89
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies2
bizhub 750/600 2-19
Before Making Copies
Chapter 2
No.Item NameDescription
1 Sub display area The results of operations and settings are 
displayed. 
2 [Job List] key A list is displayed showing the jobs that have been 
performed, are currently being performed, and are 
waiting to be performed.
Various commands for checking and managing 
jobs are available. (See p. 11-2.)
3 Message  display  area The status of the machine and details on operations 
that must be performed are displayed here.
4 Functions display Tabs and keys for displaying screens containing 
various functions are displayed.
Touch a tab or button to display the corresponding 
screen for specifying the settings.
5 Image  display An image of the specified settings, such as stapling 
and hole punching, are displayed.
6 [Finishing] key Touch to specify settings for sort, group, offset, 
stapling, or hole punching. (See p. 3-60.)
7 [Folding] key Touch to specify the function for folding and bind-
ing pages, tri-fold folding, zigzag (Z-Flod) folding.
8 [Save in User Box] key
(Appears only when the hard disk 
drive is installed)Touch while outputting scanned original data to 
save the data in a box.
Various commands are available to specify the box 
where the data is to be saved and whether or not 
the data is printed when it is saved. For details, re-
fer to the Box Operations of the bizhub 750/600 Us-
er’s Guide.
9 [Separate Scan] key Touch to scan the original in separate batches.
An original scanned in different batches can be 
treated as a single copy job. (See p. 3-11.)
10 Icon display  area Icons indicating the status of jobs and the machine 
are displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							2Before Making Copies
2-20 bizhub 750/600
Before Making Copies
Chapter 2
!
Detail 
[No Rotation] may appear. For details, refer to “Display Setting” on 
page 12-23.
The Basic screen (TYPE 1 or TYPE 2) that appears can be set with the 
“Copy Initial Screen Setting” parameter in the Display Setting screen (dis-
played from the User Setting screen). The arrangement of the buttons 
and screens differ with TYPE 1 and TYPE 2; however, the functions that 
can be set are the same. As a default, “TYPE 1” is selected. This manual 
contains descriptions of procedures using the Basic screen that appears 
when “TYPE 1” is selected.
For details on switching between the two types of Basic screens, refer to 
“Display Setting” on page 12-23.
2
Note 
If settings have been changed from the factory defaults, the tab for the 
screen containing the changed settings appears framed with a solid line.
Icons That Appear in the Touch Panel
IconDescription
Indicates that data is being sent from the machine, regardless of the cur-
rent mode
Indicates that this machine is receiving data, regardless of the current 
mode
Indicates that an error occurred during an image stabilization operation, 
a print operation or a scan operation
Touch this icon to view a screen containing a warning code.
If the warning screen was closed when a warning occurred, touch this 
button to display the warning screen again.
Indicates that 75% to 100% of the paper remains in the paper tray
Downloaded From ManualsPrinter.com Manuals 
						

							Before Making Copies2
bizhub 750/600 2-21
Before Making Copies
Chapter 2
Indicates that 50% to 75% of the paper remains in the paper tray
Indicates that 25% to 50% of the paper remains in the paper tray
Indicates that less than 25% of the paper remains in the paper tray 
Indicates that no paper remains in the paper tray
Indicates that the toner cartridge must be replaced
Indicates the orientation in which the original is positioned
Indicates that “Enhanced Security Mode” is set to “ON”
IconDescription
Downloaded From ManualsPrinter.com Manuals