Konica Minolta bizhub 600 User Manual
Have a look at the manual Konica Minolta bizhub 600 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1Installation and Operation Precautions 1-10 bizhub 750/600 Installation and Operation Precautions Chapter 1 For Users in countries not subject to Class B regulations WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This device must be used with a shielded network (10 Base-T/100 Base-TX) cable and a shielded parallel cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules. Laser Safety This product employs a Class 3B laser diode having maximum power of 15 mW and wavelength of 770 - 800 nm. This product is certified as a Class 1 laser product. Since the laser beam is concealed by protective housings, the product does not emit hazardous la- ser radiation as long as the product is perated according to the instructions in this manual. For Denmark Users ADVARSEL Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for sråling. Klasse 1 laser produkt der opfylder IEC 60825-1 sikkerheds kravene. Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 15 mW og bølgelængden er 770 - 800 nm. For Norway Users ADVARSEL Dersom apparatet brukes på annen måte enn spesifisert I denne bruksan- visning, kan brukeren utsettes for usynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bøkge- lengde er 770 - 800 nm. Downloaded From ManualsPrinter.com Manuals
Installation and Operation Precautions1 bizhub 750/600 1-11 Installation and Operation Precautions Chapter 1 For Finland, Sweden Users LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle la- sersäteilylle. Tämä on puolijohdelaser. Laserdiodin suurin teho on 15 mW ja aallonpituus on 770 - 800 nm. VARNING! Om apparaten används på annat sätt än I denna bruksanvisning specificer- ats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 770 - 800 nm. Rear side of main body Downloaded From ManualsPrinter.com Manuals
1Installation and Operation Precautions 1-12 bizhub 750/600 Installation and Operation Precautions Chapter 1 Acoustic noise (For European Users Only) Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779. For EU member states only This symbol means: Do not dispose of this prod- uct together with your household waste! Please refer to the information of your local com- munity or contact our dealers regrading the prop- er handling of end-of-life electric and electronic equipments. Recycling of this product will help to conserve natural resources and prevent potential negative consequences for the environment and human health caused by inappropriate waste handling. Notification for US only Contains Mercury in the LCD control panel backlighting lamp, and/or in the scanning unit lamp. Dispose According to Local, State or Federal Laws. Downloaded From ManualsPrinter.com Manuals
Installation and Operation Precautions1 bizhub 750/600 1-13 Installation and Operation Precautions Chapter 1 1.3 Caution Notations and Labels Safety precaution notations and labels appear on this machine at the follow- ing positions. Be very careful that an accident does not occur when operations such as re- moving paper misfeeds are performed. DO NOT put your hand between the main body and developing fixing unit; otherwise you may be injured. High voltage is present around this part. Do not touch this part in order to reduce the risk of electric shock. DO NOT INSERT your finger into the two EDH hinge portions; otherwise you may be injured. Downloaded From ManualsPrinter.com Manuals
1Installation and Operation Precautions 1-14 bizhub 750/600 Installation and Operation Precautions Chapter 1 To avoid injury, DO NOT put your hand on top of the printed sheets. Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave your hand on the printed sheets while the primaty (main) tray goes up. Downloaded From ManualsPrinter.com Manuals
Installation and Operation Precautions1 bizhub 750/600 1-15 Installation and Operation Precautions Chapter 1 1.4 Space Requirements To ensure that machine operation, consumables replenishing, part replace- ment, and regular maintenance can easily be performed, adhere to the rec- ommended space requirements detailed below. bizhub 750/600 bizhub 750/600 + LU-402 Downloaded From ManualsPrinter.com Manuals
1Installation and Operation Precautions 1-16 bizhub 750/600 Installation and Operation Precautions Chapter 1 2 Reminder Be sure to allow a clearance of 200 mm (7-3/4 in.) or more at the back of this machine for the ventilation duct. bizhub 750/600 + FS-602 + PI-501 + ZU-602 bizhub 750/600 + FS-602 + PI-501 + LU-402 Downloaded From ManualsPrinter.com Manuals
Installation and Operation Precautions1 bizhub 750/600 1-17 Installation and Operation Precautions Chapter 1 1.5 Operation Precautions To ensure the optimum performance of this machine, observe the precau- tions described below. Power Source The power source requirements are as follows. -Voltage : 120 V AC -Frequency : 60 Hz – Use a power source with as little voltage or frequency fluctuations as possible. Operating Environment The environmental requirements for correct operation of the machine are as follows. -Operating temperature: 10°C (50°F) to 30°C (86°F) -Humidity: 10% to 80% Storage of Copies To store copies, follow the recommendation listed below. -Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. -Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Downloaded From ManualsPrinter.com Manuals
1Installation and Operation Precautions 1-18 bizhub 750/600 Installation and Operation Precautions Chapter 1 Downloaded From ManualsPrinter.com Manuals
2 Before Making Copies Chapter 2 Before Making Copies Downloaded From ManualsPrinter.com Manuals