Konica Minolta bizhub 423 User Manual

bizhub 423/363/283/2232-76
2.16 SNMP Setting Function2
4Click [OK].
%If the entered auth-password or priv-password does not meet the requirements of the Password 
Rules, a message that tells that the entered auth-password or priv-password cannot be used ap-
pears. Enter the correct auth-password or priv-password. For details of the Password Rules, see 
page 1-8.
%If the entered auth-password or priv-password does not match, a message that tells that the auth-
password or priv-password does not match...

bizhub 423/363/283/2232-77
2.16 SNMP Setting Function2
2.16.2 SNMP access authentication function
If the settings of the Administrator mode are to be changed using SNMP from the PC, the user attempting to 
gain access is authenticated to be the Administrator of the machine by using the Write User Name and SNMP 
Password (auth-password, priv-password) of the SNMP v3 Write settings made in this machine.
Operation of the network setting function and the SNMP password change function of the security control...

bizhub 423/363/283/2232-78
2.16 SNMP Setting Function2
2.16.4 SNMP network setting function
The Administrator who has been authenticated through SNMP access authentication from the PC is allowed 
to operate the network setting function. To change the setting, specify the corresponding object ID. See the 
table below for the setting items.
Setting ItemObject ID
IP address setting IP Address 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.3.1
BOOT Protocol use setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.6.1
BOOT...

bizhub 423/363/283/2232-79
2.17 WebDAV Function2
2.17 WebDAV Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the WebDAV Server Password. The Administrator of the machine 
can gain access to the WebDAV Server over the network by using the WebDAV Server Password. WebDAV 
Server Password may consist of 8 digits. The password entered for the authentication purpose appears as 
* or ● on the display....

bizhub 423/363/283/2232-80
2.17 WebDAV Function2
4Select [ON] and touch [Password Setting].
5Enter the new WebDAV Server Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
%Press the [C] key to clear all characters.
%Touch [Delete] to delete the last character entered.
%Touch [Shift] to show the upper case/symbol screen.
%Touch [Cancel] to go back to the screen shown in step 4.
6Touch [OK].
%If the entered WebDAV Server...

bizhub 423/363/283/2232-81
2.17 WebDAV Function2

0For the procedure to access the Admin Mode, see page 2-2.
0Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1Start PageScope Web Connection and access the Admin Mode.
2Select [WebDAV Settings] from the pull-down menu of Network and click [Display].
3Click [WebDAV Server Settings] from the [WebDAV Settings] menu.
4Click...

bizhub 423/363/283/2232-82
2.17 WebDAV Function2
6Click [OK].
%If the entered WebDAV Server Password does not meet the requirements of the Password Rules, a 
message that tells that the entered WebDAV Server Password cannot be used appears. Enter the 
correct WebDAV Server Password. For details of the Password Rules, see page 1-8.
%If the entered WebDAV Server Password does not match, a message that tells that the WebDAV 
Server Password does not match appears. Enter the correct WebDAV Server Password....

bizhub 423/363/283/2232-83
2.18 PC-Fax RX Setting Function2
2.18 PC-Fax RX Setting Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the operation of the PC-Fax RX Setting Function. This function 
enables received fax documents to be saved in user boxes on the hard disk installed in the machine. Memory 
RX User Boxes or any other user boxes specified are used as saving destination user boxes....

bizhub 423/363/283/2232-84
2.18 PC-Fax RX Setting Function2
4Touch [PC-Fax RX Setting].
5Make the necessary settings.
%When [Specified User Box] is selected, the data is stored at the box whose number is assigned with 
F code Sub address.
%When Dial-in is set ON, [Dial-In only] appears after [Allow]. PC-FAX receiving setting can be made 
only when the data is received with dial-in number.
%FAX input data is saved to the box as TIFF.
%When a user deleted [Specified User Box] specified at Receiving User...

bizhub 423/363/283/2232-85
2.18 PC-Fax RX Setting Function2

0For the procedure to access the Admin Mode, see page 2-2.
0Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1Start PageScope Web Connection and access the Admin Mode.
2Select [Function Setting] from the pull-down menu of Fax Settings and click [Display].
3Click [PC-Fax RX Setting] from the [Function Setting]...