Konica Minolta bizhub 361 User Manual

bizhub 2154-7
4.3 Sending a document with a receivers instruction (Polling TX)4
Tips
-To stop a registration during scanning, press the Clear/Stop key, and press [YES] in the displayed 
screen.
-To cancel polling TX, press the Function key, and select [CANCEL RESERV.]. For details, refer to 
page 3-18.
4.3.2 Deleting a document sent by polling
1Press the Function key.
2Use +, to select [POLLING TX], and press the OK key.
3Use +, to select [SINGLE] or [MULTI], and press the OK key.
4Enter a 4-digit...

bizhub 2154-8
4.4 Receiving a senders document with an instruction of this machine (Polling RX)4
4.4 Receiving a senders document with an instruction of this ma-
chine (Polling RX)
Polling RX is a function that sends an original loaded in the sender side or an original saved by a polling TX 
reservation following a recipients instruction. This is convenient when communication costs are to be borne 
by the receiver.
Tips
-Up to 255 destinations can be specified.
-When using a One-Touch Dial Key, up to 32...

bizhub 2154-9
4.5 Specify a relay distribution station for transmission (Relay Instruction transmission)4
4.5 Specify a relay distribution station for transmission (Relay In-
struction transmission)
The relay instruction transmission is a function that sends an original to a relay distribution station once, and 
broadcasts it from the relay distribution station to destinations. When there are multiple jobs to broadcast a 
document to distant destinations, group relay distribution stations and relay...

bizhub 2154-10
4.5 Specify a relay distribution station for transmission (Relay Instruction transmission)4
7Enter the password using the Keypad, and press the OK key.
%If a password is specified for a relay distribution station, enter it with up to 20 digits.
%The characters available for a password are only 0 to 9, *, and #.
%To correct a numeric value, press the Clear/Stop key.
8Press the Start key.
This starts scanning and sending.
Downloaded From ManualsPrinter.com Manuals 

bizhub 2154-11
4.6 Specify this machine as a relay distribution station (Relay broadcasting)4
4.6 Specify this machine as a relay distribution station (Relay broad-
casting)
This machine can be specified as a relay distribution station.
If this machine is specified as a relay distribution station, it receives an original sent from other fax machine 
(relay instruction station) once, and send it to multiple destinations (receiving stations).
Tips
-The relay broadcasting function supports F-code...

bizhub 2154-12
4.7 Forwarding a received document to the specified destination (Forward)4
4.7 Forwarding a received document to the specified destination 
(Forward)
Forward is a function that sends a received document to the destination specified on this machine.
A forward destination can be specified with a fax number or E-mail address.
dReference
For details on how to specify a forward destination, refer to page 7-25.
Tips
-To forward to an E-mail address, you need to install an optional Image...

5Internet Fax
Downloaded From ManualsPrinter.com Manuals 

bizhub 2155-2
5.1 Transmitting an Internet fax5
5 Internet Fax
To use the Internet fax function, you need to install the FAX Kit FK-510 and Extended Operation Panel MK-
733 as well as optional Image Controller IC-209 or Network Card NC-504 in advance.
5.1 Transmitting an Internet fax
5.1.1 Transmitting an Internet fax
Before using Internet Fax, configure the following items. Incorrect settings will result in a communication er-
ror, leading to a sending failure.
-IP address
-Subnet mask
-Gateway
-Sender...

bizhub 2155-3
5.1 Transmitting an Internet fax5
6Press the Start key.
%This starts scanning and sending if the original has been loaded onto the ADF.
After sending is completed, a long beep sounds.
%To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.
%If you load the original on the Original Glass, go to step 7.
7Use +, to select [AUTO DETECTION] or [MANUAL], and press the OK key.
8To start scanning, press the OK key.
%When changing the scanning paper size, press , to...

bizhub 2155-4
5.1 Transmitting an Internet fax5
5Use +, to select [NAME] or [E-MAIL], and press the OK key.
6Enter a destination name or a character string included in an E-mail address using the Keypad, and 
press the OK key.
%If you select [NAME] in Step 5, enter a character string included in the name.
%If you select [E-MAIL] in Step 5, enter a character string included in the E-mail address.
%Up to 10 characters can be specified for a character string.
7Use +, to select a name or E-mail address, the...