Konica Minolta bizhub 211 User Manual

Precaution3
bizhub 163/211 3-11Paper feed unit (optional)
Paper feed unit
1
2
3
45
No.Part nameDescription
1-4 2nd paper draw-
er/3rd paper draw-
er/4th paper 
drawer/5th paper 
drawer• Can be loaded with up to 250 sheets of plain paper.
• Up to four paper feed unit can be installed.
5 Right-side door Opened when clearing paper misfeeds. (See p. 8-12.)
Downloaded From ManualsPrinter.com Manuals 

3Precaution
3-12 bizhub 163/211Job separator (optional)
Job separator
1
2
3
No.Part nameDescription
1 Paper output indica-
torLights up when paper remains in the copy output tray and the up-
per output tray is being moved up.
2 Upper output tray Collects pages printed from the computer.
3 Lower output tray Collects copies.
Downloaded From ManualsPrinter.com Manuals 

Precaution3
bizhub 163/211 3-13
3.3 Control panel parts and their functions
Names of control panel parts and their functions
123 4 56
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21
No.Part nameDescription
1 [Power Save] key/in-
dicatorPress to enter Power Save mode. (See p. 3-21.)
2 [Mixed Original] 
key/indicatorPress to select the Mixed Original setting.
3 Simplex/Duplex 
key/indicatorSelects double-sided copying. Select 1-SIDE%1-SIDE, 1-
SIDE%2-SIDE, 2-SIDE%1-SIDE or 2-SIDE%2-SIDE. If any set-
ting other...

3Precaution
3-14 bizhub 163/211
12 [Density] key Press to select the scanning density of copies.
13 [Quality] key Press to select TEXT, PHOTO or TEXT/PHOTO as the doc-
ument quality.
14 [Zoom] key Press to specify whether to enlarge or reduce the image when 
copying. (See p. 5-53.)
15 [Paper] key Press to select the paper drawer that is to be used.
16 [Function] key/indi-
catorPress to specify settings for advanced copy operations, such as 
copying with a binding margin added.
17 [Finishing] key/indi-...

Precaution3
bizhub 163/211 3-15
22 23 24 25 26
27
28
29
30
No.Part nameDescription
22 [Fax] key Press to enter Fax mode. The indicator on the key lights up in 
green to indicate that the machine is in Fax mode. (Available only 
when fax kit FK-506 is installed)
23 [Scan] key/indicator Press to enter Scan mode. The indicator lights up in green to in-
dicate that the machine is in Scan mode. (Available only when net-
work interface card NC-503 or image controller IC-206 are 
installed)
24 [Copy]...

3Precaution
3-16 bizhub 163/211Adjusting the angle of the display
1Press the display to adjust to any of three angles.
2Adjust the display to the angle that allows for easy operation.
– Press the display at either A or B to adjust the display angle.
A: Lowers the display (3 % 2 % 1)
B: Raises the display (1 % 2 % 3)
29 [Start] key/indicator • Press to start a copy operation.
• If this key is pressed while this machine is warming up, the next 
copy job is queued. (See p. 3-21.)
• The key lights up in...

Precaution3
bizhub 163/211 3-17Display indications
Copy mode screen
UTILITY MODE screen12 3
4
5
6
7 8
9
PAPER:
ZOOM :AUTO
TEXT/PHOTO
Paper Empty
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
No.Display indicationDescription
1 Paper source Indicates the paper drawer that is selected.
1 Indicates that the 1st paper drawer is selected.
2 Indicates that the 2nd paper drawer is selected.
3 Indicates that the 3rd paper drawer is selected.
4 Indicates that the 4th paper drawer is...

3Precaution
3-18 bizhub 163/211
3 Paper type Indicates the paper type that is selected.
Indicates that plain paper is selected.
Indicates that recycled paper is selected.
Indicates that special paper is selected.
Indicates that the selected paper is only for single-sided printing.
Indicates that thick paper is selected.
Indicates that overhead projector transparencies are selected.
Indicates that envelopes or postcards are selected.
4 Number of copies Indicates the specified number of copies.
A setting...

Precaution3
bizhub 163/211 3-19
3.4 Power supply
Turning on the machine
2
Note 
The machine warms up as listed below (at normal room temperature (23 
°C)).
bizhub163: Within 30 seconds
bizhub211: Within 15 seconds
A copy job can be queued while the machine is warming up. (Refer to 
page 3-21)
%Set the power switch to [n].
The indicator on the [Start] key lights 
up in orange and the message 
PLEASE WAIT! appears in the 
display.
Turning off the machine
1Check that all jobs are finished.
2Set the power...

3Precaution
3-20 bizhub 163/211Default settings
The settings that are automatically selected when the machine is turned on 
or an auto panel reset operation is performed are called the default 
settings. These settings serve as a reference for all functions.
Copy mode
-Number of copies: 1
-Copy density: AUTO
-Zoom: 100% (full size)
-Paper: AUTO
-Finishing: NON-SORT
!
Detail 
The default settings can be changed from Utility mode. (Refer to 
page 7-3.)
Automatically clearing settings (Auto panel reset)...