Konica Minolta bizhub 211 User Manual

Installation and operation precautions2
bizhub 163/211 2-15For Denmark users
7 ADVARSEL
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af 
funktion.
%Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af 
funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der 
opfylder IEC60825 sikkerheds kravene.
Dette er en halvlederlaser. Laserdiodens højeste styrke er 5 mW og 
bølgelængden er 770-795 nm.
For Finland, Sweden users
LOUKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
7...

2Installation and operation precautions
2-16 bizhub 163/211
7 VAROITUS
Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle 
lasersäteilylle.
%Älä katso säteeseen.
7 VARNING
Osynlig laserstrålning när denna del är öppnad och spärren är 
urkopplad.
%Betrakta ej strålen.
For Norway users
7 ADVARSEL!
Dette en halvleder laser.
%Dersom apparatet brukes på annen måte enn spesifisert i denne 
bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som 
overskrider grensen for laser...

Installation and operation precautions2
bizhub 163/211 2-17Laser safety label
A laser safety label is attached to the outside of the machine as shown 
below.
Ozone release
7 CAUTION 
A negligible amount of ozone is generated during normal operation of 
this machine. 
An unpleasant odor may, however, be created in poorly ventilated rooms 
during extensive machine operations. For a comfortable, healthy, and safe 
operating environment, it is recommended that the room be well ventilated.
%Locate the machine...

2Installation and operation precautions
2-18 bizhub 163/211Acoustic noise
For European users
Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste 
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
For EU member states only
This symbol means: Do not dispose of this 
product together with your household 
waste!
Please refer to the information of your local 
community or contact our dealers 
regrading the proper handling of end-of-
life electric and electronic equipments. 
Recycling...

Installation and operation precautions2
bizhub 163/211 2-19
2.3 Installation precautions
Installation site
Observe the following precautions to maintain the machine in its best 
possible condition.
To ensure utmost safety and prevent possible malfunctions, install the 
machine in a location that meets the following requirements:
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A...

2Installation and operation precautions
2-20 bizhub 163/211Space requirements
To ensure easy machine operation, supply replacement, and maintenance, 
adhere to the recommended space requirements detailed below.
2
Note 
Since there is a ventilation duct on the left side of the machine, be sure 
to allow a clearance of *100 mm or more on the left side.
Allow a clearance of **400 mm or more on the right side of the machine 
so that the side cover can be opened.
Unit: mm
1069
1100
1099
**400 599
1475
375...

Installation and operation precautions2
bizhub 163/211 2-21
2.4 Operation precautions
Operating environment
The environmental requirements for correct operation of the machine are as 
follows:
-Temperature:
10°C to 30°C (50°F to 86°F) with fluctuations of no more than 10°C (18°F) 
within an hour
-Humidity:
15% to 85% with fluctuations of no more than 10% within an hour
Proper use
To ensure the optimum performance of the machine, follow the precautions 
listed below:
-Never place heavy objects on the...

2Installation and operation precautions
2-22 bizhub 163/211
7 WARNING
The area around the fusing unit is extremely hot.
%In order to reduce the risk of burns, do not touch any area other than 
those indicated in the manual. Be especially careful not to touch parts 
marked with warning labels, and their surrounding areas.
%If you get burnt, immediately cool the skin under cold water, and then 
seek professional medical advice.
Transporting the machine
If you need to transport the machine over a long...

Installation and operation precautions2
bizhub 163/211 2-23Storage of copies
Copies that are to be kept for a long time should be kept where they are not 
exposed to light in order to prevent them from fading.
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on 
copies.
Downloaded From ManualsPrinter.com Manuals 

2Installation and operation precautions
2-24 bizhub 163/211
Downloaded From ManualsPrinter.com Manuals