Konica Minolta bizhub 211 User Manual

Before making copies4
bizhub 163/211 4-15
4.5 Original documents
Using the document feeder
The document feeder automatically feeds in, scans, then feeds out each 
page of a multi-page document, one page at a time. The correct type of 
document must be loaded in order for the document feeder to function 
properly.
Using an incorrect type of document may cause a paper misfeed or damage 
to the document or copier.
2
Note 
In order to copy double-sided documents, the reverse automatic 
document feeder (for...

4Before making copies
4-16 bizhub 163/211Documents of uniform sizes
Mixed width document sizes (DF-605)
o: Copying possible —: Copying not possible
Document feed 
methodDocument typeDocument size
Document feeder Sheet documents
• Single-sided documents 
DF-502Capacity: 50 g/m2 to 110 g/m2 DF-605Capacity: 35 g/m2 to 128 g/m2
• Double-sided documents DF-605Capacity: 50 g/m2 to 128 g/m2
• Documents of mixed sizes DF-502Capacity: 60 g/m2 to 90 g/m2
DF-605Capacity: 50 g/m2 to 128 g/m2
DF-502A3 w, B4 w, A4...

Before making copies4
bizhub 163/211 4-17Precautions concerning documents
The following types of documents should not be loaded into the document 
feeder, otherwise paper misfeeds or damage to the document or machine 
may occur. Instead, these types of documents should be positioned on the 
original glass.
-Folded documents (folded in half or Z-folded)
-Highly translucent or transparent documents, such as diazo 
photosensitive paper
-Documents with binder holes (2 to 4 holes)
-Documents with many binder...

4Before making copies
4-18 bizhub 163/211
4.6 Loading the document
The document can be loaded into the document feeder or positioned on the 
original glass. Position the document correctly according to the type of 
document being copied.
Loading the document into the document feeder
1Slide apart the adjustable document 
guides.
2Load the document so that the side 
to be copied faces up.
– A maximum of 50 document 
pages can be loaded.
– Do not load so many pages that 
the top of the stack is higher than...

Before making copies4
bizhub 163/211 4-19Placing the document on the original glass
For ordinary documents or documents that cannot be loaded into the 
document feeder, position them as described below.
1Lift open the document feeder.
2Position the document so that the 
side to be copied faces down.
– Align the document with the 
document scales at the top and 
at the left side of the original 
glass.
3Carefully close the document feeder.
Downloaded From ManualsPrinter.com Manuals 

4Before making copies
4-20 bizhub 163/211Placing highly translucent or transparent documents on the original 
glass
When copying a highly translucent or transparent document, such as 
overhead projector transparencies, tracing paper or diazo photosensitive 
paper, position it as described below.
1Lift open the document feeder.
2Position the document so that the 
side to be copied faces down.
– Align the document with the 
document scales at the top and 
at the left side of the original 
glass.
3Place a...

Before making copies4
bizhub 163/211 4-21Placing a book on the original glass
When copying two facing pages of a bound document, such as a book or 
magazine, position it as described below.
2
Reminder 
Do not place objects weighing more than 3 kg on the original glass. In 
addition, do not press down extremely hard on the document, otherwise 
the machine may be damaged.
1Lift open the document feeder.
2Place the book on the original glass.
– To copy facing pages together, 
align the corner of the book...

4Before making copies
4-22 bizhub 163/211Copying documents of mixed sizes (Mixed Original setting)
The Mixed Original setting is used to copy documents containing pages of 
different sizes loaded as a set into the document feeder.
!
Detail 
The possible combinations of document sizes are described below.
DF-502
Documents of different sizes can be copied only if all pages have the 
same width.
For example: A document consisting of A3 w- and A4 v-size pages.
DF-605
Refer to Mixed width document sizes...

Before making copies4
bizhub 163/211 4-23
2Load the document so that the side 
to be copied faces up.
– A maximum of 50 document 
pages can be loaded.
– Do not load so many pages that 
the top of the stack is higher than 
the , mark.
3Slide the document guides to fit the 
size of document being loaded.
4Press the [Mixed Original] key.
The indicator on the [Mixed Original] 
key lights up.
5Press the [Paper] key.
Downloaded From ManualsPrinter.com Manuals 

4Before making copies
4-24 bizhub 163/211
6Press the [+] or [,] key until AUTO is selected, and then press the 
[OK] key.
– Check that AUTO appears in the first line of the screen.
The main screen appears again.
7Press the [Start] key.
2
Reminder 
Be sure to load the document correctly, otherwise the pages may not be 
fed in straight.
PAPER SELECT
TRAY1:
AUTO
TRAY2:
Downloaded From ManualsPrinter.com Manuals