Konica Minolta bizhub 211 User Manual

Making copies5
bizhub 163/211 5-11
5.2 Stopping/restarting/canceling a copy job
Follow the procedure described below to stop a copy job.
1Select the desired copy settings, and then press the [Start] key.
Copying begins.
2During copying, press the 
[Clear/Stop] key. The message 
>>Please Wait appears, and the 
job is stopped.
– To continue the stopped job, select NO, and then press the [OK] 
key.
JOB CANCEL
NO
YES
Downloaded From ManualsPrinter.com Manuals 

5Making copies
5-12 bizhub 163/211– To delete the stopped job, select YES, and then press the [OK] 
key.
JOB CANCEL
NO
YES
Downloaded From ManualsPrinter.com Manuals 

Making copies5
bizhub 163/211 5-13
5.3 Selecting the paper source
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Press the [Paper] key.
3Press the [+] or [,] key until AUTO or the desired paper drawer is 
selected, and then press the [OK] key.
The main screen appears again.
4If necessary, specify any other copy settings.
– Refer to Specifying a zoom setting on page 5-53.
– Refer to Selecting a density setting on page 5-61.
– Refer to Advanced copy operations on page...

5Making copies
5-14 bizhub 163/211
!
Detail 
If NO SUITABLE PAPER appears in the display after AUTO is 
selected and the [Start] key is pressed, no paper tray or drawer is loaded 
with paper of the most suitable size. Either load paper with the 
appropriate size, or select a paper drawer, and then press the [Start] key 
again.
Automatic tray switching feature
With the automatic tray switching feature, copying/printing can continue with 
paper from a different paper drawer if the currently selected drawer...

Making copies5
bizhub 163/211 5-15Order for automatically switching paper drawers
When automatic tray switching operation is performed, the next paper 
drawer in the following list is chosen.
1st paper drawer % 2nd paper drawer % 3rd paper drawer % 4th paper 
drawer % 5th paper drawer % Multi bypass tray
!
Detail 
If a setting for special paper (such as overhead projector transparencies 
or label sheets) is selected for the 1st paper drawer or multi bypass tray, 
that paper drawer will not be selected...

5Making copies
5-16 bizhub 163/211
5.4 Making copies on manually fed paper
Manually feed the copy paper if you wish to make copies onto paper not 
loaded into any paper drawer or onto special paper, such as overhead 
projector transparencies, postcards or thick paper.
2
Reminder 
When copying with the manual bypass tray, load the paper one sheet at 
a time.
!
Detail 
For details on the number of pages that can loaded into the multi bypass 
tray (optional), refer to page 4-5.
Paper that can be fed...

Making copies5
bizhub 163/211 5-17Adjusting the multi bypass tray
The bypass tray extension can be adjusted to fit the size of paper to be 
loaded, as shown below.
Downloaded From ManualsPrinter.com Manuals 

5Making copies
5-18 bizhub 163/211Loading plain paper into the bypass tray
Load the paper into the manual bypass tray one sheet at a time.
A maximum of 100 sheets of paper can be loaded into the multi bypass tray. 
Do not load so much paper into the multi bypass tray that the top of the stack 
is higher than the , mark.
2
Note 
When paper other than plain paper is loaded, the paper type setting must 
be specified from the control panel.
2
Reminder 
Load the paper so that the side to be printed on faces...

Making copies5
bizhub 163/211 5-19
2Adjust the tray extension and the paper guides to fit the size of paper 
being loaded.
– For details on specifying the settings for the paper size and paper 
type, refer to steps 4 through 7 of the procedures in Copying onto 
manually fed paper (manual bypass tray) on page 5-28 and 
Copying onto manually fed paper (multi bypass tray) on 
page 5-31.
Downloaded From ManualsPrinter.com Manuals 

5Making copies
5-20 bizhub 163/211– The relationship between the document image orientation and the 
orientation of the copy image printed on the paper is shown below.
Downloaded From ManualsPrinter.com Manuals