Konica Minolta bizhub 20p User Manual

Routine Maintenance
101
6
Cleaning6
Clean the outside and inside of the printer regularly with a dry, lint-free cloth. When you replace the toner 
cartridge or the drum unit, make sure that you clean the inside of the printer. If printed pages are stained with 
toner, clean the inside of the printer with a dry, lint-free cloth.
Cleaning the outside of the printer6
WARNING 
Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the surface of 
the printer.
 
DO NOT...

Routine Maintenance
102
6
cWipe the outside of the printer with a dry, lint-free cloth to remove dust.
dRemove anything that is stuck inside the paper tray.
eWipe the inside of the paper tray with a dry, lint-free cloth to remove dust.
fPut the paper tray back in the printer.
gPlug the printer back in, and then turn on the power switch.
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
103
6
Cleaning the inside of the printer6
aTurn off the printer power switch and then unplug the printer.
bPress the front cover release button and then open the front cover.
cTake out the drum unit and toner cartridge assembly.
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
104
6
CAUTION 
After you have just used the printer, some internal parts of the printer will be extremely hot. Wait for the 
printer to cool down before you touch the internal parts of the printer.
 
IMPORTANT
 
We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or 
cloth in case you accidentally spill or scatter toner.
 Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold...

Routine Maintenance
105
6
dWipe the scanner window with a dry, lint-free cloth.
ePut the drum unit and toner cartridge assembly back in the printer.
fClose the front cover.
gPlug the printer back in, and then turn on the power switch.
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
106
6
Cleaning the paper pick-up roller6
If the paper pick-up roller is stained, the printer may not feed paper. In that case, clean the paper pick-up roller 
as follows:
aTurn off the power switch and unplug the printer. 
bUnplug the power cord and interface cable from the printer. 
cPull the paper tray out of the printer. 
dDampen a soft cloth with lukewarm water and wipe the separator pad (1) in the paper tray with it.
1
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
107
6
eWipe the two paper pick-up rollers (1) inside the printer. 
fPut the paper tray back in the printer. 
gMake sure that you have turned off the power switch, and then connect the power cord and interface 
cable to the printer.
hPlug in the power cord and turn on the power switch of the printer.
1
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
108
6
Cleaning the corona wires6
Cleaning the corona wire6
If you have print quality problems, clean the corona wire as follows:
aPress the front cover release button and then open the front cover.
bTake out the drum unit and toner cartridge assembly.
Downloaded From ManualsPrinter.com Manuals 

Routine Maintenance
109
6
IMPORTANT
 
We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or 
cloth in case you accidentally spill or scatter toner.
 To prevent damage to the printer caused by static electricity, DO NOT touch the electrodes shown in the 
illustration.
 
cClean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left 
to right several times.
Note Be sure to return the tab to the home position...

110
7
7
Troubleshooting7
You can correct most problems by yourself. If you need additional help, visit us at http://konicaminolta.com/.
Identifying your problem7
First, check the following:7
„The AC power cord is connected properly and the printer is turned on.
„ All of the protective parts have been removed.
„ The toner cartridge and drum unit are installed properly.
„ The front and back covers are fully closed.
„ Paper is inserted properly in the paper tray.
„ The interface cable is securely connected...