Konica Minolta bizhub 20p User Manual

USER’S GUIDE
KONICA MINOLTA Laser Printer 
You must set up the hardware and install the driver before you can use the printer.
Please use the Quick Guide to set up the printer. You can find a printed copy in the box. 
Please read this Users Guide thoroughly before you use the printer. Keep the CD/DVD-ROM in a convenient place 
so you can use it quickly if you need to. 
A32P-9561-00A
Downloaded From ManualsPrinter.com Manuals 

i
Using this guide
Symbols used in this guide
We use the following icons throughout this User’s Guide:
Warnings tell you what to do to prevent possible personal injury.
  
Cautions specify procedures you must follow or avoid to prevent possible minor 
injuries.
  
Important specify procedures you must follow or avoid to prevent possible 
damage to the printer or other object.
  
Electrical Hazard icons alert you to a possible electrical shock.
  
Hot Surface icons warn you not to touch machine parts that...

ii
Safety precautions
To use the printer safely
If you DO NOT follow these safety instructions, there is a possibility of a fire, electrical shock, burn or 
suffocation. Please keep these instructions for later reference and read them before attempting any 
maintenance. 
WARNING 
There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure 
that you have turned off the power switch and unplugged the printer from the AC power outlet.
 
DO NOT handle the plug...

iii
DO NOT use this product to report a gas leak in the vicinity of the leak.
 
Use only the power cord provided with the machine. 
 
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep these bags 
away from babies and children.
 
DO NOT use flammable substances, any type of spray or an organic solvent/liquid containing alcohol or 
ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. See 
Cleaning on page 101 for...

iv
CAUTION 
After you have just used the printer, some internal parts of the printer will be extremely hot. To prevent 
injury, when you open the front cover or back cover (back output tray) of the printer, DO NOT touch the 
shaded parts shown in the illustration. If you do this, you may get burned.
 
Avoid placing your machine in a high-traffic area. 
 
DO NOT place the machine near heaters, air conditioners, refrigerators, water, chemicals or devices that 
contain magnets or generate magnetic fields....

v
Note 
DO NOT remove or damage the caution label located on or around the fuser.
 
Downloaded From ManualsPrinter.com Manuals 

vi
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA 
MINOLTA HOLDINGS, INC.
bizhub and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS 
TECHNOLOGIES, INC.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft 
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States 
and/or...

vii
Table of Contents
1 About this Printer
1
Carton components ...................................................................................................................................1
Interface cable .....................................................................................................................................1
Front view ............................................................................................................................................3
Back view...

viii
4 Control Panel
71
LEDs (Light Emitting Diodes)...................................................................................................................71
Service call indications ............................................................................................................................77
Control panel buttons...............................................................................................................................79
Print a test page...

ix
A Appendix
132
Printer specifications..............................................................................................................................132
Engine .............................................................................................................................................132
Controller .........................................................................................................................................133
Software...