Konica Minolta bizhub 20p User Manual

Control Panel
81
4
Print the Printer Settings page4
You can print the current settings using the control panel button or printer driver.
Using the Go button
4
aMake sure that the front cover is closed and the power cord is plugged in.
bTurn on the printer and wait until the printer is in the Ready state.
cPress Go three times within 2 seconds. The printer will print the current printer settings page.
Using the printer driver
4
If you are using the Windows® printer driver, you can print the current...

Control Panel
82
4
Print Fonts4
You can print a list of the internal fonts using the control panel button or printer driver.
Using the Go button
4
aTurn off the printer.
bMake sure that the front cover is closed and the power cord is plugged in.
cHold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner, 
Drum and Paper LEDs light up. Release Go. Make sure that the Back Cover, Toner, Drum and Paper 
LEDs are off.
dPress Go twice. The printer will print a list of the...

Control Panel
83
4
Default settings4
If you want to reset the print server back to its factory default settings (resetting all information such as the 
password and IP address information), follow these steps:
Network default settings
4
aTurn off the printer.
bMake sure that the front cover is closed and the power cord is plugged in.
cHold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and 
then Status LED turns off.
dRelease Go. Make sure that all the LEDs are...

84
5
5
Options5
This printer has the following optional accessories. You can increase the capabilities of the printer with these 
items.
Lower tray (PF-P10)5
Two optional lower trays (Tray 2 and Tray 3) can be installed; each lower tray can hold up to 250 sheets of 
80 g/m
2 (21 lb) paper. When both optional trays are installed, the printer can hold up to 800 sheets of plain 
paper. If you want to buy an optional lower tray unit, call the dealer you bought the printer from.
For setup, see the Users Guide...

Options
85
5
SO-DIMM (memory module)5
The printers have 32 MB of standard memory and one slot for optional memory expansion. You can expand 
the memory up to 544 MB by installing dual in-line memory modules (SO-DIMMs). 
SO-DIMM types5
In general, the machine uses industry-standard SO-DIMM with the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used....

Options
86
5
Installing extra memory5
aTurn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the 
printer.
IMPORTANT
 
Be sure to turn off the printer power switch before you install or remove the DIMM.
 
bRemove the DIMM cover.
cUnpack the DIMM and hold it by its edges.
CAUTION 
To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board 
surface.
 
dHold the DIMM by the edges and align the notches in the DIMM with...

Options
87
5
ePut the DIMM cover back on.
fReconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch.
Note To make sure that you have installed the DIMM properly, you can print the printer settings page that shows 
the current memory size. See Print the Printer Settings page on page 81.
 
Downloaded From ManualsPrinter.com Manuals 

88
6
6
Routine Maintenance6
You will need to replace certain parts and clean the printer regularly.
Replacing the consumable items6
You will need to replace the consumable items when the machine indicates that the life of the consumable is 
over.
CAUTION 
When you replace certain parts or clean the inside of the printer, remember the following: 
If your clothes are smeared with toner, wipe off the toner with a dry cloth and immediately wash the clothes 
in cold water to avoid stains. 
 
Be careful not to...

Routine Maintenance
89
6
Toner cartridge6
The life of the original toner cartridge that came with the printer may be either a standard1 or high yield toner 
cartridge
2, and depends on the model and country you bought the printer in.
1Standard toner cartridges print approximately 3,000 A4 or Letter-size single-sided pages. Approx. cartridge yield is declared in accordance with 
ISO/IEC 19752.
2High yield toner cartridges print approximately 8,000 A4 or Letter-size single-sided pages. Approx. cartridge...

Routine Maintenance
90
6
Replace Toner message6
The printer will stop printing until you replace the toner cartridge with a new one.
Replacing the toner cartridge6
Note • To ensure high quality printing, we recommend that you use only genuine toner cartridges. When you 
want to buy toner cartridges, call your dealer.
• We recommend that you clean the printer when you replace the toner cartridge. See Cleaning on 
page 101.
 
aMake sure that the printer is turned on. Open the front cover.
Downloaded From...