Konica Minolta bizhub 131f User Manual

Getting started4
bizhub 131f/190f 4-17Setting of the Paper Size
Default setting: 
1st cassette: A4, 2nd cassette (option): A4, Bypass Tray: A4
After loading paper in the paper cassette, you need to set the correct paper 
size by following procedure.
1Press [Menu], [2], [1], [0], [1], [Enter].
2Press [,] or [+] to select the paper size you are using in the first cas-
sette.
3Press [Enter].
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4Press [,] or [+] to select...

4Getting started
4-18 bizhub 131f/190f
Downloaded From ManualsPrinter.com Manuals 

5Copying
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Copying5
bizhub 131f/190f 5-3
5Copying
5.1 Before copying
5.1.1 Document and paper handling
Before you begin making copies, please read the information of the docu-
ment and paper handling mentioned on page 4-7.
5.1.2 Changing your machine to the Copy mode
%Press the Copy/Fax/Scan button until Copy light glow.
5.1.3 Display in the copy standby mode
%Press the Copy/Fax/Scan button to change the machine to the copy 
mode.
When the machine is in the copy mode, the machine shows:
-To change the settings,...

5Copying
5-4 bizhub 131f/190f
5.1.4 Memory overflow message
If you have stored too much information in 
your machine’s memory, a Memory Over-
flow message will appear on the LCD:
This appears because 
-too many pages have been stored in the memory, 
or
-the pages that are stored have too much information on them for your 
machine to remember.
If this message appears, press [Start] to tell your machine to copy as many 
pages in memory, or press [Cancel] to delete from memory all pages stored 
during the...

Copying5
bizhub 131f/190f 5-5
5.2 Making copies
5.2.1 Making copies using the ADF
1Switch the machine to copy mode by 
pressing the Copy/Fax/Scan but-
ton
.
2Place your document face up on the ADF and adjust document guides 
to the document size.
3As needed, set the copy settings including the document type and 
scanning contrast, number of copies, zoom ratio and sort setting. (See 
“Basic copy settings” on page 5-6.)
4To clear the settings, press [Reset]. 
5Press [Start] to begin copying.
To stop the...

5Copying
5-6 bizhub 131f/190f
5.3 Basic copy settings
5.3.1 Selecting document type
-Text
Select this when copying letters.
-Photo/Text
Select this when copying documents containing photographs or draw-
ings with letters.
-Photo
Select this when copying photographs or drawings.
To select the document type:
1Press [Doc. Resolution].
2Press [*] or [)] to select the document type.
5.3.2 Scanning contrast
Setting the scanning contrast allows you to compensate for any excessive 
lightness or darkness, of...

Copying5
bizhub 131f/190f 5-7
5.3.3 Zoom ratio
There are three ways to enter the zoom ratio, below.
2
Note
For enlargement copy, you can only use the document glass.
Using preset ratios
1Press [+] or [,] to select the following preset ratio.
-50%: Min.
-70%: A4 % A5
-81%: B5 JIS % A5
-86%: A4 % B5 JIS
-100%
-115%: B5 JIS % A4
-122%: A5 % B5 JIS
-141%: A5 % A4
-200%: Max.
Adjusting the ratio in 1% steps
1Press [Advanced Functions] until Zoom is appear and press [Enter].
or
Press the soft key (“Special...

5Copying
5-8 bizhub 131f/190f
5.3.5 Sorting copies
2
Note
You can use only the ADF for sorting copy.
The copies can be assembled as sets in sequential order.
%To available the sorting copy, press [Sort]. 
The light of the sort key will glow, which means the sorting copy is 
turned on. 
%To turn off the sorting copy, press [Sort] again to light off the LED.
5.3.6 Selecting paper size
As default, your machine selects the paper size automatically.
The machine will show Auto for paper 
size when you set the...