Konica Minolta bizhub 131f User Manual

Layout and installation3
bizhub 131f/190f 3-5
3.3 Control Panel Overview
1.Mode switch button
Pressing this button to switch the machine’s mode.
2.
Paper source light
Indicates the selected paper source.
3.
Alarm light
Glows when a problem occurs.
4.
Comm./Memory Rec. light
-Blinks when the machine is communicating with another machine.
-Glows when the machine has the received document in its memory.
5.
Machine mode light
Indicates what mode the machine is in.
6.
Paper Size/Next Doc.
-In copy mode:...

3Layout and installation
3-6 bizhub 131f/190f12.
Cursor keys
Scrolls through the menu items, moves the cursor on the LCD, and se-
lects the settings and items.
-In fax mode:
+ (Redial): Redials the numbers you have dialed. (See page 9-12.)
, (Tel Index): Displays one-touch and speed-dial entries sorted al-
phanumerically, as in a telephone directory. (See page 8-16.)
-In copy and scan mode:
,+: Chooses the zoom ratio.
13.
Enter
Selects or confirms settings.
14.
Cancel
Deletes characters on the LCD and...

Layout and installation3
bizhub 131f/190f 3-723.
Macro keys
Performs a series of key operations through one touch.
(See “Special features [CD]” on page 12-3 for more information.)
24.
One-Touch keys
Dials a pre-registered fax or phone number.
23
24
Downloaded From ManualsPrinter.com Manuals 

3Layout and installation
3-8 bizhub 131f/190f
3.4 Setup your machine
3.4.1 Unlocking the mirror carriage
7IMPORTANT
%Do not turn the power on until after you have unlocked the scanner unit. 
Otherwise, damage could result.
1Slide the scanner unit lock switch to the unlock position as shown be-
low.
2After you have unlocked the scanner unit, turn the transport mode off. 
(See page 3-15.)
Downloaded From ManualsPrinter.com Manuals 

Layout and installation3
bizhub 131f/190f 3-9
3.4.2 Attaching the document tray
Attach the document tray by inserting it into the appropriate holes, as shown 
below.
Downloaded From ManualsPrinter.com Manuals 

3Layout and installation
3-10 bizhub 131f/190f
3.4.3 Making connection
Telephone line connection
Attach the ferrite core to the telephone line cord as illustrated below. 
Plug the telephone line cord to the LINE jack and the other end to the wall 
jack.
Connecting an external phone
If you want to use your machine for receiving both faxes and voice calls, con-
nect the external telephone (or an answering machine) to your machine.
L
I
N
EPHONE1
PHONE2L
I
N
E
P
H
O
N
E
1
P
H
O
N
E
2
Ferrite 
core
Telephone...

Layout and installation3
bizhub 131f/190f 3-11
3.4.4 Installing the Drum and Toner cartridges
1Pull the release lever to open the side 
cover. 
2Open the front cover.
3Turn the toner cartridge locking lever 
to the leftward (unlock position).
4Unpack the drum cartridge from its 
carton and slide it into the machine 
firmly until it locks into place com-
pletely.
Downloaded From ManualsPrinter.com Manuals 

3Layout and installation
3-12 bizhub 131f/190f
2
Note
Shield the drum cartridge from light, especially strong light.
5Unpack the starter toner cartridge 
from its carton. Then, holding the 
toner cartridge with both hands, gen-
tly shake it to distribute the toner 
evenly inside the cartridge.
2
Note
Do not touch the roller of the toner cartridge.
6Slide the toner cartridge into the ma-
chine firmly until it locks into place 
completely.
7Turn the cartridge locking lever right-
ward until it locks into...

Layout and installation3
bizhub 131f/190f 3-13
8Close the front cover and side cover.
2
Note
The machine will not work if the covers 
are not closed properly.
Downloaded From ManualsPrinter.com Manuals 

3Layout and installation
3-14 bizhub 131f/190f
3.4.5 Plug in and power up
1Plug the non-pronged end of the 
supplied AC power cord into the AC 
socket on the machine and the 
pronged end into a properly ground-
ed AC outlet.
7IMPORTANT
%Be sure that you do not turn the power on until after you have unlocked 
the scanner unit locking switch. (See page 3-8.)
2Turn on the power switch. The markings are international standards: 
[I] means on, [O] means off.
It will take a few seconds for the machine to warm...