Juiceman JUICE EXTRACTOR FOOD PROCESSOR JM1000M User Manual

							1
Customer Care Line:
 
For online customer service  
and to register your product\f go to 
www.prodprotect.com\fapplica
Juiceman® Express Jr.
Juice Extractor & Food Processor
ModEl/ModElo
❍  
JM1000M 
						

							2\b
Please Read and Save this Use and Care Book 
IMPORTANT SAFEGUARDS
When using electrical appliances\f basic sa\bety precautions should always 
be \bollowed including the \bollowing:
❍
 Read all instructions.
❍ To protect against risk o\b electrical shock do not put cord\f plugs or 
appliance in water or other liquid.
❍ Close supervision is necessary when any appliance is used by or near 
children.
❍ Unplug \brom outlet when not in use\f be\bore putting on or taking o\b\b 
parts\f or be\bore cleaning.
❍ Avoid contacting moving parts. 
❍ Do not operate any appliance with a damaged cord or plug or a\bter 
the appliance mal\bunctions\f or is dropped or damaged in any manner. 
Return appliance to the nearest authorized service \bacility \bor 
examination\f repair or electrical or mechanical adjustment. Or\f call 
the appropriate toll-\bree number on the cover o\b this manual.
❍ The use o\b attachments not recommended or sold by the 
manu\bacturer may cause \bire\f electric shock or injury.
❍ Do not use outdoors.
❍ Do not let cord hang over edge o\b table or counter\f or touch hot 
sur\baces.
❍ Always make sure juicer cover is clamped securely in place be\bore 
motor is turned on. Do not un\basten clamps while juicer is in 
operation.
❍ Be sure to turn switch to OFF position a\bter each use o\b your juicer. 
Make sure the motor stops completely be\bore disassembling.
❍ Do not put your \bingers or other objects into the juicer opening while 
it is in operation. I\b \bood becomes lodged in opening\f use \bood pusher 
or another piece o\b \bruit or vegetable to push it down. When this 
method is not possible\f turn the motor o\b\b and disassemble juicer to 
remove remaining \bood.
❍ Do not use the appliance i\b the rotating sieve is damaged.
❍ Do not operate without the pulp container in place.
❍ Keep hands and utensils away \brom moving blades or discs while 
processing \bood to reduce the risk o\b severe injury to persons or 
damage to the \bood processor. A scraper may be used\f but must be 
used only when the \bood processor is not running.
❍ Blades are sharp. Handle care\bully.
❍ Do not place on or near a hot gas or electric burner\f or in a   
heated oven.
❍  To reduce the risk o\b injury\f never place cutting blade or discs on 
base without \birst putting bowl properly in place.
❍ Be certain cover is securely locked in place be\bore operating 
appliance.
❍ Never \beed \bood by hand. Always use \bood pusher.
❍ Do not attempt to de\beat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
This product is for household use only.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized pl\pug (one blade is wi\pder than the other).\p To 
reduce the risk o\b electric shock\f this p\plug is intended to fit into a polarized 
outlet only one way. I\b the plug does n\pot fit \bully into the outlet\f reverse the 
plug. I\b it still does not fit\f c\pontact a qualified electrician. Do not \pattempt to 
modi\by the plug in a\pny way.
TAMPER-RESISTANT SCREW
Warning: This applia\cnce is equipped with\c a tamper-resistant screw to 
prevent removal of the outer cover. To reduce the risk of fire or electric 
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Re\cpair should be done\c only by authorized se\crvice 
personnel.
ELECTRICAL CORD
a)  A short power-supply cord is to be provided to reduce the risk resulting 
\brom becoming entangled in or tripping o\pver a longer cord.
b)  Extension cords are available and may be used i\p\b care is exercised in  
their use.
c)  I\b an extension cord is used\f
1)  The marked electrical rating o\b the extension cord should be at least as 
great as the electrical rating o\b the applian\pce\f
2)  The longer cord should be arranged so that it wi\pll not drape over the 
countertop or tabletop where it can be pulled on by children or tripped 
over.
Note: I\b the power supply cord is damaged\f it sh\pould be replaced by qualified 
personnel or in Latin\p America by an authorized \pservice center.
ENGLISH 
						

							45
GETTING TO KNOW YOUR JUICEMAN® EXPR\cESS JR.
BASE 
1.  Motor base
2.  Off \f Perfect Prep™ button
\b.  High button
4.  Low button
5.  Skid-resistant feet
6.  Spatula\fcleaning brush (not shown)
Note:  For part assemblies\f please re\ber to the speci\bic section \bor the attachment you 
wish to use. 
How to Use
This product is \bor household use on\ply.
GETTING STARTED
•  Remove all packing material\f and any stickers \brom the product; remove 
and save literature.
•  Please go to www.prodprotect.com/applica to register your warranty;  
\bor additional in\bormation about  your Juiceman
® Express Jr. go to  
www.juiceman.com. 
•  Your appliance is partially assembled in the box. Take the appliance apart 
and wash all removable parts as instructed in CARE AND CLEANING 
section o\b this man\pual. This will remove any traces o\b dust or residue le\bt 
\brom manu\bacturing and shippin\pg. 
Note: The blades are covered by 2 plastic sleeves. Do not discard; instead\f 
save them to store the blade sa\bely and help to retain its sharpness. 
Important: Handle the blades very carefully. They are very sharp. We 
suggest handling the blad\ces by the center post.
•  Select a level dry countertop where the appliance is to be used\f allowing air 
space on all sides to provide proper ventilation \bor the motor.
Important: Do not rinse \cor immerse motor base in water or any other liq\cuid.
Product may vary slightly from what is illustrated.
2
5
1
3
4 
						

							67
How to Use
CONTROL BUTTONS FOR THE JUICE EXTRA\cCTOR
The control buttons are located on the \bront o\b the base. Press Low or High to 
select your desired speed. Re\ber to the SPEED CHART to help select the right 
speed \bor your produce.  
Note: The Per\bect Prep™ button is not recommended \bor use with the jui\pce 
extractor.
Low  
Use Low speed \bor so\bter produce like berries\f citrus \br\puits\f lea\by vegetables 
and so\bt-skinned pr\poduce such as peaches\f pl\pums and cucumbers.
High  
Use High speed \bor harder produce like rind-on melons and pineapple\f beets 
and ginger.
Off 
The juice extractor will run continuously until the O\b\b butt\pon is pressed. The 
appliance should be stored in O\b\b position a\pnd unplugged when n\pot in use. 
IMPORTANT: Always press the OFF button before plugging in the a\cppliance.
PURCHASING AND STORING INGREDIENTS
• 
Always use \bresh \bully ripened \bruits an\pd vegetables.
•  When purchasing\f consider selecting \bruits and v\pegetables in season \bor 
best \breshness and flavor. 
•  Choose \bruits that ar\pe plump\f tender and have bright color. Fruits should be 
heavy \bor their size witho\put bruises\f cuts or\p blemishes.
•  To ripen \bruit\f place in a small clean paper bag. Close the bag loosely and 
let stand at room temperature. (To speed ripening\f ad\pd a ripe apple or 
banana to the bag.) Once ripened\f store in the re\brigerator \bor a day or two 
until ready to use.
•  Store perishable vegetables in the re\brigerator until ready to use.
PREPARING FRUITS AND V\cEGETABLES
•  Wash \bruits and vegetables thoroughly just be\bore using in the juic\pe 
extractor\f using a natural bristle brush. We suggest using a biodegradable 
cleaner\f such as Fit
® Fruit and Vegetable Wash to help remove pesticide 
residue.
JUICE EXTRACTOR
GETTING TO KNOW YOUR JUICE EXTRACTOR
†  1.  Food pusher (Part # JM2000S-01)
  2.  Feed chute 
†  \b.  Juice extractor lid (Part # JM2000S-02)
†  4.  Stainless steel mesh filter (not shown) (Part # JM2000S-0\b)
  5.  Safety lock latch
†  6.  Juice extractor base (Part # JM2000S-15)
  7.  Juice spout
†  8.  Pulp container (Part # JM2000S-04)
  9.  Pulp spout
Note: †  indicates consumer replaceable/removable parts
2
3
4
6
8
9
1
7
5 
						

							89
• 
I\b desired\f remove the skin. The ski\pn can be le\bt on all produce with the 
exception o\b:
  o All citrus \bruits\f \pincluding
  • Oranges
  • Grape\bruit
  • Lemons
  • Limes
  • Tangerines
Note: The oil in the ski\pn o\b these \bruits tastes bitter and is di\bficult \pto digest.
Hint: Although the skin \pmay be le\bt on melons and pineapple\f you may choose to 
remove them to maximize the \brui\pt flavor in the finished d\prink.
•  All pits and large seeds should be \premoved\f including:
  o Apricots
  o Cherries
  o Nectarines
  o Mangoes
  o Peaches
  o Plums
  o Melons
•  Remove and discard outer leaves o\b non-organic produce. Peel away any wax 
coatings.
•  Trim any bruised or \pdiscolored sections o\b \brui\pts and vegetables
•  The design o\b the \beed chute accommodates larger produce. It will easily 
accommodate most whole \bruits and vegetables\f such as apples\f beets and 
carrots. I\b necessary\f cut into large pieces be\bore inserting into \beed tube.
•  Be sure all parts o\b the j\puice extractor are clean and dry. See CLEANING 
instructions on page 1\p3.
ASSEMBLING THE JUICE\c EXTRACTOR 1. Place the juice extractor base over the motor base 
with the arrow on the juice extractor base directly 
above the unlock 
 symbol on the motor base. 
Turn the juice extractor base counterclockwise 
until it locks into position (A). The arrow will now 
be above the lock 
 symbol on the motor base.  2. 
With both hands\f hold\p the stainless steel mesh 
filter by the rim and c\penter it over the drive 
sha\bt. Lower the filter into the juice extractor 
base\f rotating it clockwise until it d\props into 
place. You will hear it sna\pp when it is engage\pd 
(B). 
Important: The cutting bl\cades at the bottom of the 
filter are very sharp. Always handle the filter by 
the rim.
Note: When properly assembled\f the filter will spin 
\breely inside the juice extractor base. This can be 
checked by spinning the fi\plter by the rim.
3.  Place the lid on the ju\pice extractor base so that 
the sa\bety lock tab is to the right o\b the s\pa\bety 
lock latch. Rotate the lid counterclockwise until 
the bar snaps into the latch (C). 
Important: Always press the OFF button to make 
sure the appliance is off before securing the lid.\c
4.  Tilt the pulp container slightly and place it 
directly under the pulp spo\put. Push the bottom 
o\b the pulp container so it rests against the side 
o\b the motor base (D). 
Hint: To make cleanup more convenient\f line the 
pulp container with a small \pplastic bag to collect 
the pulp.
5.  Place a glass or a measuring c\pup under the 
juice spout to collect the juice (E).
6.  Place the \bood pusher into the \beed chute.
Important: For your protection, this applia\cnce has 
an interlock system. The juice extractor will not 
operate unless the lid is properly locked in place. 
B
C
D
E
A 
						

							1011
HOW TO USE JUICE EXTRACTOR
1. 
Follow the instructions on pages \p8 and 9 to assemble the juice extractor. 
2.  Assemble the prepared \bruits and/or vegetables to be used on the counter or in 
a bowl next to the juice extractor.
3. Place a clean glass \bor your juice under the juice 
spout (F). 
4.  Be sure the pulp container is in place. 
5.  Plug appliance into standard electrical outlet.
6.  Turn the power to the Low setting and allow to run 
10 seconds be\bore placing any \bood into the \beed 
chute.
7.  To use High\f allow the appliance to run 10 seconds 
on Low\f then select High and place the \bood in the 
\beed chute.
Note: Use the RECOMMENDED\p SPEEDS guide to help determine your speed 
setting.  8. Use the \bood pusher as a gui\pde to gently direct the 
produce through the \beed chute. To get the most 
juice \brom the \bruits and v\pegetables\f do not rush 
the \bood through the appliance (G). 
Note: When using the appl\piance\f do not allow the pulp 
container to overfill. This may cause the appliance to 
stall.
9.  To empty the pulp container or the juice glass 
during use\f simply turn the appliance O\b\b. Allow the 
motor to come to a complete stop and \bor all juices 
to finish dripping \brom the spout be\bore emptying. 
Be sure to replace pulp container and juice glass 
be\bore resuming extraction.
10.  Unplug the appliance when not in use.
Important: Never place fingers or hands into the feed chute.
F
G
RECOMMENDED SPEEDS FOR JUICE EXTRACTION
FRUITS  RECOMMENDED SPEED
Apricots Low
Blueberries Low
Blackberries Low
Cherries Low
Citrus Fruits Low
GrapesLow
Kiwi Low
Mangoes Low
Melons (skin removed) Low
Peaches Low
Plums Low
Raspberries Low
Strawberries Low
Apples High
Cranberries High
Melons (skin on) High
Pineapple (skin on) High
Papaya (skin on) High
VEGETABLES RECOMMENDED SPEED
Cucumber Low
Kale  Low
Parsley Low
Spinach Low
Tomatoes Low
Asparagus High
Beets High
Broccoli High
Cabbage High
Carrots High
Celery High
Fennel High
Ginger High
Potatoes High
Sweet Potatoes High 
						

							121\b
HINTS AND TIPS FOR YOUR JUICE EXTRACTOR
• 
Do not put \bood into the juice extractor be\bore turning the applia\pnce on.
•  Let the appliance run \bor at least 10 seconds be\bore placing any \bood into the 
\beed chute.
•  Do not let the pulp container or juice glass overfill while using the machine\p. 
Turn the appliance o\b\b\f wait \bor the motor to stop running and any \pjuice to stop 
flowing. Empty the jui\pce glass and/or pulp container. Be sure they are properly 
replaced be\bore resuming operation o\b the extractor.
•  When processing di\b\berent \bruits and vegetables\f process the so\bt \boods on Low 
speed first; \bollow with the \bruits an\pd vegetables that use the Hig\ph speed. 
•  When processing lea\by vegetables\f such as parsley and herbs\f add the\p herbs 
between the harder \boods.
•  For easy clean up\f place a plastic bag inside the \ppulp container be\bore using 
the appliance.
•  When processing small \bruits\f \plike grapes\f add them in ha\pnd\buls.
•  Beets and pomegranates stain easily; process them last and wash all part\ps 
be\bore making another ju\pice drink.
•  Do not process bananas\f avocados or coconut. They have no juice and will clog 
the appliance.
•  Be sure to remove all pits and large seeds \brom \bruits.
•  To make delicious citrus\p juice\f peel the \bruit\f removing all the white pith. 
Re\brigerate till cold and process the \bruit through the extractor \bor a great 
drink. 
•  For maximum nutriti\ponal benefits drink \pyour processed juice right away.
Tip for optimum juicing:\c Avoid excessive build up o\b pulp on\p the underside o\b the 
lid. 
USES FOR THE PULP
Tip: The pulp \brom the \bruits and v\pegetables is high in nutri\ptional value.
•  Use it to add fiber and flavor to mu\bfins and quick \pbreads. 
•  Use it to thicken soups\f casseroles and sauces. 
•  Use \bruit pulp to add nutrition an\pd flavor to desserts\f such as\f pudd\pings and 
cakes.
•  Be sure to use it the same d\pay you extract the juice.
•  Pulp is also \bood \bor your garden. Use it \bor compost.Care and Cleaning
This product contains no user servi\pceable parts. Re\ber service to qualified 
service personnel.
Important: Always unplug your appliance from the outlet before cleaning.
CLEANING 
1. Unplug your Juiceman® Express Jr. and disassemble.
2.  Using a sponge or d\pamp cloth\f clean the base\f rubber \p\beet and underside 
o\b the motor base. I\b necessary\f you may use a damp t\poothbrush or cloth to 
clean juice \brom the inside o\b the\p drive sha\bt (on top o\b motor base).
Important: Do not immerse the base in wat\cer or spray with water. Clean only 
by wiping with a d\camp sponge, cloth or paper towel.
3.  All parts – except the base – are dishwasher-sa\be (top-rack only) or 
you may wash in warm\p\f soapy water\f using any mild \pliquid dishwashing \p
detergent. Do not use a\pny products containing ammonia or \pscouring 
powders\f as these can dull\f scratch or mar the sur\bace. Use the cleaning 
brush provided to remove pulp le\bt on any o\b the removable parts. Do not 
use metal brushes or pads.
4.  To clean the filter\f use cleaning brush provided to make sure the tiny holes 
in the mesh filter are not clogged. This can be accomplished by holding\p 
filter under a running\p \baucet while brushing the mesh \pscreen \brom both the 
inside and outside\p o\b the filter.
Tip: Pulp \brom pulp container can be used in many \pdi\b\berent ways: making 
breads\f mu\bfins\f cakes\f soup stocks\f compressed \bacial packs and gar\pden 
compost material.
REMOVING TOUGH STAINS
1.  Due to power\bul staining properties o\b carotenoids \bound in many 
vegetables\f particularly carrots\f we suggest soaking any stained parts 
overnight in one o\b t\phe \bollowing solutions:
  • Biodegradable soap in enough wa\prm water to cover juice extractor  
    parts
  • ¼ cup bleach added to a sink \bull o\b wa\prm water
  • 1 part warm water to 1 part cider vine\pgar
  • ½ small box o\b baking soda in\p enough warm water to cover juicer parts.
Important: Never use ammonia or \cabrasive cleansers!
2.  A\bter soaking overnight\f lightly scrub with so\bt br\pistle brush and liquid \p
detergent.
STORAGE
Store your appliance in a clean\f dry place. Never wrap cord tightly around the 
appliance. Do not put any s\ptress on cord where it enters the motor base\f as 
this could cause cord to \bray and break. 
						

							1415
TROUBLESHOOTING FOR THE 
 
JUICE EXTRACTOR
PROBLEM POSSIBLE CAUSE SOLUTION
Juice extractor will 
not start when speed 
button is depressed. The juice extractor 
portion o\b the 
appliance may not be 
assembled correctly.Check the 
ASSEMBLY 
instructions \bound on pages 
8 and 9.
The motor o\b the juice 
extractor seems to be 
struggling. • 
Pulp container may 
be \bull.
•  Pulp may have 
collected under the 
lid.
•  The speed selected 
may not be correct • 
Turn o\b\b the appliance. 
Empty the pulp container. 
Do not allow the pulp 
container to get too \bull.
•  Turn o\b\b and unplug the 
appliance. Disassemble 
the appliance and take o\b\b 
the lid. Wash thoroughly 
and return to appliance 
\bollowing the assembly 
instructions.
•  Check the 
RECOMMENDED  SPEED 
guide on pages 10 and 11.
The juice extractor 
has stopped producing 
juice. The \bilter basket may 
be blocked.
Turn o\b\b and unplug the 
appliance. Disassemble the 
appliance and take o\b\b the 
lid. Wash thoroughly and 
return to appliance \bollowing 
the assembly instructions.
The juice extractor is 
not producing as much 
juice as expected. High \biber \bruits and 
vegetables may be 
clogging the \bilter.Turn o\b\b and unplug the 
appliance. Disassemble the 
appliance and take o\b\b the 
lid. Wash thoroughly and 
return to appliance \bollowing 
the assembly instructions.
Appliance stops 
running. Motor may be 
overheating.Unplug appliance and allow 
it to cool approximately 
 
5 minutes be\bore continuing 
use.
NOTES
OVERHEAT PROTECTION SYSTEM
Important: This appliance contains a PTC overheat protection system. When 
the appliance is being operated for too long or with too much load, the PTC 
protector will shut down the power of the appliance to protect the unit. If th\ce 
power shuts down, unplug for 20 minutes and plug in for normal operation. 
						

							1617
WORKBOWL
GETTING TO KNOW YOUR JUICEMAN® EXPRESS JR. WORKBOWL
† 
1.  Workbowl feed chute cap (Part # JM2000S-11)
  2.  Workbowl feed chute 
†  \b.  Workbowl lid (Part # JM2000S-12)
  4.  Safety lock latch
  5.  Workbowl handle 
†  6.  9-cup workbowl (Part # JM2000S-1\b)
†  7.  Flat blade (Part # JM2000S-15)
†  8.  S-blade (Part # JM2000S-14)
Note: †  indicates consumer replaceable/removable parts
How to Use
CONTROL BUTTONS FOR THE WORKBOWL 
The control buttons are located on the \bront o\b the base. Press Low or High to 
select a speed.
Off\fPerfect Prep™ button 
The appliance should be stored in O\b\b position a\pnd unplugged when n\pot in use.
The Per\bect Prep™ \bunction works like a pulse \bunction \pand is per\bect \bor short 
and precise tasks. It lets you control the size and uni\p\bormity o\b the \boods being 
chopped. 
 • The Per\bect Prep™ button must be pressed and held \bor the appliance  
    to operate. When released\f the appliance will stop. Do not use the \p 
    Per\bect Prep™ button longer than 2 minutes continuously.
  • The motor runs as long as this button is held down. Press the button  
    down and then release; allow the blades to stop running and the \p\bood  
    to \ball to the bottom o\b the workbowl be\bore pressing again.
  • This \bunction gives better control when chopping\f min\pcing\f mixing and  
    blending \boods. You can control the size o\b the \b\poods \brom coarse to  
    fine.
High\fLow Speed Control
  • When either speed is\p selected\f the processor will run continuously until   
    the O\b\b button is pressed.
  • These speeds are used \bor chopping\f blending\f dressings\f sauces and  
    making batters.
IMPORTANT: Always press the OFF button before plugging in the a\cppliance.
CUTTING BLADES
The workbowl comes with two blades (see callouts 7 and 8 on pa\cge 16):  
•  The “S” blade can be used \bor chopping vegetables and \bruits\f minc\ping 
cooked meats\f grinding \pco\b\bee beans and nuts a\pnd making cookie and bread 
crumbs.
87
2
3
5
6
1
4 
						

							1819
• 
The flat blade can be used \bor:
  o Grinding co\b\bee beans (up to 2 cups- approximately 5 oz)
  o Grinding nuts (up t\po 1 cup- approximately 4 oz)
  o Making bread and cookie crumbs (up to 2 cups- approximately 5 oz)
ASSEMBLING THE WORKBOWL
1.  Place the workbowl on the motor base so the arrow on the workbowl is placed 
directly over the unlock
 
 symbol on the motor base.
2.  Hold handle and rotate workbowl counterclockwise 
toward the lock 
 symbol until it cl\picks firmly into 
place (H). 
Note: Be sure to lock the workbowl in place be\bore 
attaching your desired blade blade and \plid. 
3.  Hold selected blade by center sha\bt and insert\p onto 
center post by pushing straight down (J).
Important: The blades are very sharp. Use caution 
when handling and s\ctoring.
4.  Place the lid on the workbowl so that the sa\bety 
lock tab is to the right o\b the s\pa\bety lock latch (K). 
The lock/unlock 
 /  symbols will be \bacing you 
and \beed chute will be to the back o\b the app\pliance.
Important: For your protection this applian\cce has 
an interlock system. The processor will not operate 
unless the lid is properly locked in place. 
Important: Always press the OFF button to make sure 
the appliance is off before securing the lid.\c
5.  Hold \beed chute and rotate lid counterclockwise 
until lid locks into place.
6.  Place the cap into the \beed chute.
7.  The \beed chute cap can be removed when adding liqu\pid or additional \boods 
while the appliance is running. USING THE WORKBOWL
The workbowl is used to coarsely or finely chop\f mince\f mix and puree \boods 
to a smooth consistency. Use the workbowl to chop \bresh and cooked \bruits 
and vegetables\f cooked meats\f fish and po\pultry; to make pastry; and to make 
bread\f cookie and cracker crumbs.
1. 
Follow the directions on above to assemble the workbowl parts o\b the 
appliance. 
2.  Place \bood in workbowl.
3.  Place lid on workbowl and lock into place by rotating lid counterclockwise.
4.  Place \beed chute cap in place on top o\b the \beed chute. 
Caution: Never use your fingers to direct food through the chute.
5.  Select Per\bect Prep™\f Low or High \bor desired speed.
Note: Process \boods no more than a \bew seconds at a time. The\p Per\bect Prep™ 
\bunction produces excellent results and o\b\bers greater control.  
6.  To add \bood while processor is running remove \beed chute cap and insert 
\bood through the \beed chute. Replace \beed chute cap in the \beed chute.
Important: Be sure the blade has completely stopped spinning bef\core 
removing the lid from the workbowl. 
7.  When finished\f press the O\b\b button and allow blades to stop revolving 
be\bore removing lid. Twist the lid toward the unlock
 
 symbol to remove.
8.  To unlock workbowl turn it clockwise toward the unlock 
 symbol and li\bt 
o\b\b motor base.
Note: Remove the workbowl \brom the appliance be\bore removing the blade to 
prevent \bood \brom leaking through the center opening o\b the bo\pwl.
  9.  Care\bully remove the blade by the c\penter post and empty workbowl. 
10.  Unplug appliance when not in use.
HINTS AND TIPS FOR YOUR WORKBOWL
•  The processor works very quickly. 
•  Watch care\bully to avoid over-processing \boods.
•  The Per\bect Prep™ button o\b\bers the best control and results.
•  For best results\f use \boods that are about the same si\pze.
•  It is recommended that \bood is cut into ½-inch pieces.
•  Do not overload the workbowl.
  o Do not process more than 2 cups (500 \pml) o\b \bood in the workbowl  
    at one time.
  o To chop meat\f use no \pmore than 2 cups (approximately 8 oz.) o\b cooked  
    meat cut into ½-inch cubes  and\p process  using the Per\bect  Prep™  
    button in 2 second intervals. 
Important: When chopping \cmeat, always make sure it is at room 
temperature to ensure optimal performance.
•  Never walk away \brom the appliance while it is on.
•  To avoid splattering\f use a \bunnel\p inserted into the \beed chute when adding 
ingredients\f such as oi\pl\f flour and sugar.
H
J
K