Juiceman JUICE EXTRACTOR FOOD PROCESSOR JM1000M User Manual

1
Customer Care Line:
 
For online customer service  
and to register your product\f go to 
www.prodprotect.com\fapplica
Juiceman® Express Jr.
Juice Extractor & Food Processor
ModEl/ModElo
❍  
JM1000M 

2\b
Please Read and Save this Use and Care Book 
IMPORTANT SAFEGUARDS
When using electrical appliances\f basic sa\bety precautions should always 
be \bollowed including the \bollowing:
❍
 Read all instructions.
❍ To protect against risk o\b electrical shock do not put cord\f plugs or 
appliance in water or other liquid.
❍ Close supervision is necessary when any appliance is used by or near 
children.
❍ Unplug \brom outlet when not in use\f be\bore putting on or taking o\b\b 
parts\f or be\bore cleaning....

45
GETTING TO KNOW YOUR JUICEMAN® EXPR\cESS JR.
BASE 
1.  Motor base
2.  Off \f Perfect Prep™ button
\b.  High button
4.  Low button
5.  Skid-resistant feet
6.  Spatula\fcleaning brush (not shown)
Note:  For part assemblies\f please re\ber to the speci\bic section \bor the attachment you 
wish to use. 
How to Use
This product is \bor household use on\ply.
GETTING STARTED
•  Remove all packing material\f and any stickers \brom the product; remove 
and save literature.
•  Please go to...

67
How to Use
CONTROL BUTTONS FOR THE JUICE EXTRA\cCTOR
The control buttons are located on the \bront o\b the base. Press Low or High to 
select your desired speed. Re\ber to the SPEED CHART to help select the right 
speed \bor your produce.  
Note: The Per\bect Prep™ button is not recommended \bor use with the jui\pce 
extractor.
Low  
Use Low speed \bor so\bter produce like berries\f citrus \br\puits\f lea\by vegetables 
and so\bt-skinned pr\poduce such as peaches\f pl\pums and cucumbers.
High  
Use...

89
• 
I\b desired\f remove the skin. The ski\pn can be le\bt on all produce with the 
exception o\b:
  o All citrus \bruits\f \pincluding
  • Oranges
  • Grape\bruit
  • Lemons
  • Limes
  • Tangerines
Note: The oil in the ski\pn o\b these \bruits tastes bitter and is di\bficult \pto digest.
Hint: Although the skin \pmay be le\bt on melons and pineapple\f you may choose to 
remove them to maximize the \brui\pt flavor in the finished d\prink.
•  All pits and large seeds should be \premoved\f including:...

1011
HOW TO USE JUICE EXTRACTOR
1. 
Follow the instructions on pages \p8 and 9 to assemble the juice extractor. 
2.  Assemble the prepared \bruits and/or vegetables to be used on the counter or in 
a bowl next to the juice extractor.
3. Place a clean glass \bor your juice under the juice 
spout (F). 
4.  Be sure the pulp container is in place. 
5.  Plug appliance into standard electrical outlet.
6.  Turn the power to the Low setting and allow to run 
10 seconds be\bore placing any \bood into the \beed...

121\b
HINTS AND TIPS FOR YOUR JUICE EXTRACTOR
• 
Do not put \bood into the juice extractor be\bore turning the applia\pnce on.
•  Let the appliance run \bor at least 10 seconds be\bore placing any \bood into the 
\beed chute.
•  Do not let the pulp container or juice glass overfill while using the machine\p. 
Turn the appliance o\b\b\f wait \bor the motor to stop running and any \pjuice to stop 
flowing. Empty the jui\pce glass and/or pulp container. Be sure they are properly 
replaced be\bore resuming...

1415
TROUBLESHOOTING FOR THE 
 
JUICE EXTRACTOR
PROBLEM POSSIBLE CAUSE SOLUTION
Juice extractor will 
not start when speed 
button is depressed. The juice extractor 
portion o\b the 
appliance may not be 
assembled correctly.Check the 
ASSEMBLY 
instructions \bound on pages 
8 and 9.
The motor o\b the juice 
extractor seems to be 
struggling. • 
Pulp container may 
be \bull.
•  Pulp may have 
collected under the 
lid.
•  The speed selected 
may not be correct • 
Turn o\b\b the appliance. 
Empty the pulp...

1617
WORKBOWL
GETTING TO KNOW YOUR JUICEMAN® EXPRESS JR. WORKBOWL
† 
1.  Workbowl feed chute cap (Part # JM2000S-11)
  2.  Workbowl feed chute 
†  \b.  Workbowl lid (Part # JM2000S-12)
  4.  Safety lock latch
  5.  Workbowl handle 
†  6.  9-cup workbowl (Part # JM2000S-1\b)
†  7.  Flat blade (Part # JM2000S-15)
†  8.  S-blade (Part # JM2000S-14)
Note: †  indicates consumer replaceable/removable parts
How to Use
CONTROL BUTTONS FOR THE WORKBOWL 
The control buttons are located on the \bront o\b the base....

1819
• 
The flat blade can be used \bor:
  o Grinding co\b\bee beans (up to 2 cups- approximately 5 oz)
  o Grinding nuts (up t\po 1 cup- approximately 4 oz)
  o Making bread and cookie crumbs (up to 2 cups- approximately 5 oz)
ASSEMBLING THE WORKBOWL
1.  Place the workbowl on the motor base so the arrow on the workbowl is placed 
directly over the unlock
 
 symbol on the motor base.
2.  Hold handle and rotate workbowl counterclockwise 
toward the lock 
 symbol until it cl\picks firmly into 
place (H)....