JUICEMAN EXPRESS JM2000S User Manual

							

CustomerCare Line:	
For online customer service  and to register your product, go to 
www.prodprotect.com/applica 
						

							



Please Read and Save this Use and Care Book 
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always 
be followed including the following:
❍	Read all instructions.
❍	To protect against risk of electrical shock do not put cord, plugs or 
appliance in water or other liquid.
❍	Close supervision is necessary when any appliance is used by or near 
children.
❍	Unplug from outlet when not in use, before putting on or taking off 
parts, or before cleaning.
❍	Avoid contacting moving parts. 
❍	Do not operate any appliance with a damaged cord or plug or after 
the appliance malfunctions, or is dropped or damaged in any manner. 
Return appliance to the nearest authorized service facility for 
examination, repair or electrical or mechanical adjustment. Or, call 
the appropriate toll-free number on the cover of this manual.
❍	The use of attachments not recommended or sold by the 
manufacturer may cause fire, electric shock or injury.
❍	Do not use outdoors.
❍	Do not let cord hang over edge of table or counter, or touch hot 
surfaces.
❍	Always make sure juicer cover is clamped securely in place before 
motor is turned on. Do not unfasten clamps while juicer is in 
operation.
❍	Be sure to turn switch to OFF position after each use of your juicer. 
Make sure the motor stops completely before disassembling.
❍	Do not put your fingers or other objects into the juicer opening while 
it is in operation. If food becomes lodged in opening, use food pusher 
or another piece of fruit or vegetable to push it down. When this 
method is not possible, turn the motor off and disassemble juicer to 
remove remaining food.
❍	Do not use the appliance if the rotating sieve is damaged.
❍	Do not operate without the pulp container in place.
❍	Keep hands and utensils away from moving blades or discs while 
processing food to reduce the risk of severe injury to persons or 
damage to the food processor. A scraper may be used, but must be 
used only when the food processor is not running.
❍	Blades are sharp. Handle carefully.
❍	Do not place on or near a hot gas or electric burner, or in a  
heated oven.
❍	To reduce the risk of injury, never place cutting blade or discs on 
base without first putting bowl properly in place.
❍	Be certain cover is securely locked in place before operating 
appliance.
❍	Never feed food by hand. Always use food pusher.
❍	Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
This product is for household use only.
POLARIZED PLUG (0V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To 
reduce the risk of electric shock, this plug is intended to fit into a polarized 
outlet only one way. If the plug does not fit fully into the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician. Do not attempt to 
modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to 
prevent removal of the outer cover. To reduce the risk of fire or electric 
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repair should be done only by authorized service 
personnel.
ELECTRICAL CORD
a) A short power-supply cord is to be provided to reduce the risk resulting 
from becoming entangled in or tripping over a longer cord.
b)  Extension cords are available and may be used if care is exercised in 
 
their use.
c)  If an extension cord is used,
1)  The marked electrical rating of the extension cord should be at least as 
great as the electrical rating of the appliance,
2)  The longer cord should be arranged so that it will not drape over the 
countertop or tabletop where it can be pulled on by children or tripped 
over.
Note: If the power supply cord is damaged, it should be replaced by qualified 
personnel or in Latin America by an authorized service center.
ENGLISH 
						

							



GETTING TO KNOW YOUR JUICEMAN® EXPRESS 
BASE 
.  Motor base
.  Off button
.  Low button
.  High button
.  Perfect Prep™ button
6.  Skid-resistant feet
7.  Spatula/cleaning brush (not shown)
Note: For part assemblies, please refer to the specific section for the attachment you wish to use. 
How to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material, and any stickers from the product; remove 
and save literature.
•  Please go to www.prodprotect.com/applica to register your warranty; 
 
for additional information about  your Juiceman® Express go to  
www.juiceman.com. 
•  Your appliance is partially assembled in the box. Take the appliance apart 
and wash all removable parts as instructed in CARE AND CLEANING 
section of this manual. This will remove any traces of dust or residue left 
from manufacturing and shipping. 
Note: The blades are covered by 2 plastic sleeves. Do not discard; instead, 
save them to store the blade safely and help to retain its sharpness. 
Important: Handle the blades and slicer/shredder disc very carefully. They 
are very sharp. We suggest handling the slicer/shredder disc by the edges 
and the blades by the center post.
• Select a level dry countertop where the appliance is to be used, allowing air 
space on all sides to provide proper ventilation for the motor.
Important: Do not rinse or immerse motor base in water or any other liquid.
Product may vary slightly from what is illustrated.
2
3
4
5
1
6 
						

							
6
7

How to Use
CONTROL BUTTONS FOR THE JUICE EXTRACTOR
The control buttons are located on the front of the base. Press Low or High to 
select your desired speed. Refer to the SPEED CHART to help select the right 
speed for your produce.  
Note: The Perfect Prep™ button is not recommended for use with the juice 
extractor.
Low  
Use Low speed for softer produce like berries, citrus fruits, leafy vegetables 
and soft-skinned produce such as peaches, plums and cucumbers.
High  
Use High speed for harder produce like rind-on melons and pineapple, beets 
and ginger.
Off 
The juice extractor will run continuously until the Off button is pressed. The 
appliance should be stored in Off position and unplugged when not in use. 
PURCHASING AND STORING INGREDIENTS
• Always use fresh fully ripened fruits and vegetables.
•  When purchasing, consider selecting fruits and vegetables in season for 
best freshness and flavor. 
•  Choose fruits that are plump, tender and have bright color. Fruits should be 
heavy for their size without bruises, cuts or blemishes.
•  To ripen fruit, place in a small clean paper bag. Close the bag loosely and 
let stand at room temperature. (To speed ripening, add a ripe apple or 
banana to the bag.) Once ripened, store in the refrigerator for a day or two 
until ready to use.
•  Store perishable vegetables in the refrigerator until ready to use.
PREPARING FRUITS AND VEGETABLES
• Wash fruits and vegetables thoroughly just before using in the juice 
extractor, using a natural bristle brush. We suggest using a biodegradable 
cleaner, such as Fit® Fruit and Vegetable Wash to help remove pesticide 
residue.
JUICE EXTRACTOR
GETTING TO KNOW YOUR JUICE EXTRACTOR
† .  Food pusher (Part # JM000S-0)
  .  Feed chute 
† .  Juice extractor lid (Part # JM000S-0)
† .  Stainless steel mesh filter (not shown) (Part # JM000S-0)
  .  Safety lock latch
†  6.  Juice extractor base (Part # JM000S-)
  7.  Juice spout
†  8.  Pulp container (Part # JM000S-0)
  9.  Pulp spout
Note: † indicates consumer replaceable/removable parts
2
3
4
6
8
9
1
7
5 
						

							
8
9

• If desired, remove the skin. The skin can be left on all produce with the 
exception of:
  o All citrus fruits, including
  • Oranges
  • Grapefruit
  • Lemons
  • Limes
  • Tangerines
Note: The oil in the skin of these fruits tastes bitter and is difficult to digest.
Hint: Although the skin may be left on melons and pineapple, you may choose to 
remove them to maximize the fruit flavor in the finished drink.
• All pits and large seeds should be removed, including:
  o Apricots
  o Cherries
  o Nectarines
  o Mangoes
  o Peaches
  o Plums
  o Melons
•  Remove and discard outer leaves of non-organic produce. Peel away any wax 
coatings.
•  Trim any bruised or discolored sections of fruits and vegetables
•  The design of the feed chute accommodates larger produce. It will easily 
accommodate most whole fruits and vegetables, such as apples, beets and 
carrots. If necessary, cut into large pieces before inserting into feed tube.
•  Be sure all parts of the juice extractor are clean and dry. See CLEANING 
instructions on page 13.
ASSEMBLING THE JUICE EXTRACTOR
1. Place the juice extractor base over the motor base 
with the arrow on the juice extractor base directly 
above the unlock  symbol on the motor base. 
Turn the juice extractor base counterclockwise 
until it locks into position (A). The arrow will now 
be above the lock  symbol on the motor base.  2. 
With both hands, hold the stainless steel mesh 
filter by the rim and center it over the drive 
shaft. Lower the filter into the juice extractor 
base, rotating it clockwise until it drops into 
place. You will hear it snap when it is engaged 
(B). 
Important: The cutting blades at the bottom of the 
filter are very sharp. Always handle the filter by 
the rim.
Note: When properly assembled, the filter will spin 
freely inside the juice extractor base. This can be 
checked by spinning the filter by the rim.
3. Place the lid on the juice extractor base so that 
the safety lock tab is to the right of the safety 
lock latch. Rotate the lid counterclockwise until 
the bar snaps into the latch (C). 
4.  Tilt the pulp container slightly and place it 
directly under the pulp spout. Push the bottom 
of the pulp container so it rests against the side 
of the motor base (D). 
Hint: To make cleanup more convenient, line the 
pulp container with a small plastic bag to collect 
the pulp.
5.  Place a glass or a measuring cup under the 
juice spout to collect the juice (E).
6.  Place the food pusher into the feed chute.
Important: For your protection, this appliance has 
an interlock system. The juice extractor will not 
operate unless the lid is properly locked in place. 
B
C
D
E
A 
						

							
0


HOW TO USE JUICE EXTRACTOR
1. Follow the instructions on pages 8 and 9 to assemble the juice extractor. 
2.  Assemble the prepared fruits and/or vegetables to be used on the counter or in 
a bowl next to the juice extractor.
3. Place a clean glass for your juice under the juice 
spout (F). 
4.  Be sure the pulp container is in place. 
5.  Plug appliance into standard electrical outlet.
6.  Turn the power to the Low setting and allow to run 
10 seconds before placing any food into the feed 
chute.
7.  To use High, allow the appliance to run 10 seconds 
on Low, then select High and place the food in the 
feed chute.
Note: Use the RECOMMENDED SPEEDS guide to help determine your speed 
setting. 
8. Use the food pusher as a guide to gently direct the 
produce through the feed chute. To get the most 
juice from the fruits and vegetables, do not rush 
the food through the appliance (G). 
Note: When using the appliance, do not allow the pulp 
container to overfill. This may cause the appliance to 
stall.
9. To empty the pulp container or the juice glass 
during use, simply turn the appliance Off. Allow the 
motor to come to a complete stop and for all juices 
to finish dripping from the spout before emptying. 
Be sure to replace pulp container and juice glass 
before resuming extraction.
10.  Unplug the appliance when not in use.
Important: Never place fingers or hands into the feed chute.
F
G
RECOMMENDED SPEEDS FOR JUICE EXTRACTION
FRUITS RECOMMENDED SPEED
ApricotsLow
BlueberriesLow
BlackberriesLow
CherriesLow
Citrus FruitsLow
GrapesLow
KiwiLow
MangoesLow
Melons (skin removed)Low
PeachesLow
PlumsLow
RaspberriesLow
StrawberriesLow
ApplesHigh
CranberriesHigh
Melons (skin on)High
Pineapple (skin on)High
Papaya (skin on)High
VEGETABLESRECOMMENDED SPEED
CucumberLow
Kale Low
ParsleyLow
SpinachLow
TomatoesLow
AsparagusHigh
BeetsHigh
BroccoliHigh
CabbageHigh
CarrotsHigh
CeleryHigh
FennelHigh
GingerHigh
PotatoesHigh
Sweet PotatoesHigh 
						

							



HINTS AND TIPS FOR YOUR JUICE EXTRACTOR
• Do not put food into the juice extractor before turning the appliance on.
•  Let the appliance run for at least 10 seconds before placing any food into the 
feed chute.
•  Do not let the pulp container or juice glass overfill while using the machine. 
Turn the appliance off, wait for the motor to stop running and any juice to stop 
flowing. Empty the juice glass and/or pulp container. Be sure they are properly 
replaced before resuming operation of the extractor.
•  When processing different fruits and vegetables, process the soft foods on Low 
speed first; follow with the fruits and vegetables that use the High speed. 
•  When processing leafy vegetables, such as parsley and herbs, add the herbs 
between the harder foods.
•  For easy clean up, place a plastic bag inside the pulp container before using 
the appliance.
•  When processing small fruits, like grapes, add them in handfuls.
•  Beets and pomegranates stain easily; process them last and wash all parts 
before making another juice drink.
•  Do not process bananas, avocados or coconut. They have no juice and will clog 
the appliance.
•  Be sure to remove all pits and large seeds from fruits.
•  To make delicious citrus juice, peel the fruit, removing all the white pith. 
Refrigerate till cold and process the fruit through the extractor for a great 
drink. 
•  For maximum nutritional benefits drink your processed juice right away.
Tip for optimum juicing: Avoid excessive build up of pulp on the underside of the 
lid. 
USES FOR THE PULP
Tip: The pulp from the fruits and vegetables is high in nutritional value.
•  Use it to add fiber and flavor to muffins and quick breads. 
•  Use it to thicken soups, casseroles and sauces. 
•  Use fruit pulp to add nutrition and flavor to desserts, such as, puddings and 
cakes.
•  Be sure to use it the same day you extract the juice.
•  Pulp is also food for your garden. Use it for compost.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified 
service personnel.
Important: Always unplug your appliance from the outlet before cleaning.
CLEANING 
1. Unplug your Juiceman® Express and disassemble.
2.  Using a sponge or damp cloth, clean the base, rubber feet and underside 
of the motor base. If necessary, you may use a damp toothbrush or cloth to 
clean juice from the inside of the drive shaft (on top of motor base).
Important: Do not immerse the base in water or spray with water. Clean only 
by wiping with a damp sponge, cloth or paper towel.
3. All parts – except the base – are dishwasher-safe (top-rack only) or 
you may wash in warm, soapy water, using any mild liquid dishwashing 
detergent. Do not use any products containing ammonia or scouring 
powders, as these can dull, scratch or mar the surface. Use the cleaning 
brush provided to remove pulp left on any of the removable parts. Do not 
use metal brushes or pads.
4.  To clean the filter, use cleaning brush provided to make sure the tiny holes 
in the mesh filter are not clogged. This can be accomplished by holding 
filter under a running faucet while brushing the mesh screen from both the 
inside and outside of the filter.
Tip: Pulp from pulp container can be used in many different ways: making 
breads, muffins, cakes, soup stocks, compressed facial packs and garden 
compost material.
REMOVING TOUGH STAINS
1. Due to powerful staining properties of carotenoids found in many 
vegetables, particularly carrots, we suggest soaking any stained parts 
overnight in one of the following solutions:
  • Biodegradable soap in enough warm water to cover juice extractor 
 
    parts
  • ¼ cup bleach added to a sink full of warm water
  • 1 part warm water to 1 part cider vinegar
  • ½ small box of baking soda in enough warm water to cover juicer parts.
Important: Never use ammonia or abrasive cleansers!
2. After soaking overnight, lightly scrub with soft bristle brush and liquid 
detergent.
STORAGE
Store your appliance in a clean, dry place. Never wrap cord tightly around the 
appliance. Do not put any stress on cord where it enters the motor base, as 
this could cause cord to fray and break. 
						

							



TROUBLESHOOTING FOR THE  
JUICE EXTRACTOR
PROBLEMPOSSIBLE CAUSESOLUTION
Juice extractor will 
not start when speed 
button is depressed.
The juice extractor 
portion of the 
appliance may not be 
assembled correctly.
Check the ASSEMBLY 
instructions found on pages 
8 and 9.
The motor of the juice 
extractor seems to be 
struggling.• 
Pulp container may 
be full.
•  Pulp may have 
collected under the 
lid.
•  The speed selected 
may not be correct • 
Turn off the appliance. 
Empty the pulp container. 
Do not allow the pulp 
container to get too full.
•  Turn off and unplug the 
appliance. Disassemble 
the appliance and take off 
the lid. Wash thoroughly 
and return to appliance 
following the assembly 
instructions.
•  Check the 
RECOMMENDED  SPEED
 
guide on pages 10 and 11.
The juice extractor 
has stopped producing 
juice.
The filter basket may 
be blocked.
Turn off and unplug the 
appliance. Disassemble the 
appliance and take off the 
lid. Wash thoroughly and 
return to appliance following 
the assembly instructions.
The juice extractor is 
not producing as much 
juice as expected.
High fiber fruits and 
vegetables may be 
clogging the filter.
Turn off and unplug the 
appliance. Disassemble the 
appliance and take off the 
lid. Wash thoroughly and 
return to appliance following 
the assembly instructions.
Appliance stops 
running.
Motor may be 
overheating.
Unplug appliance and allow 
it to cool approximately  
5 minutes before continuing 
use.
NOTES
OVERHEAT PROTECTION SYSTEM
Important: This appliance contains a PTC overheat protection system. When 
the appliance is being operated for too long or with too much load, the PTC 
protector will shut down the power of the appliance to protect the unit. If the 
power shuts down, unplug for 0 minutes and plug in for normal operation. 
						

							
6
7

SLICER/SHREDDER
GETTING TO KNOW YOUR JUICEMAN® EXPRESS SLICER/SHREDDER
† . Small food pusher / Measuring cup (Part # JM000S-0)
† .  Large food pusher (Part # JM000S-06)
  .  Large feed chute (remove small food pusher for small feed chute)
† .  Slicer/shredder lid (Part # JM000S-07)
† .  Slicer/shredder disc (Part # JM000S-08)
†  6.  Continuous flow disc (Part # JM000S-09)
  7.  Safety lock latch
†  8.  Slicer/shredder base (Part # JM000S-0)
  9.  Continuous flow chute
Note: † indicates consumer replaceable/removable parts
How to Use
CONTROL BUTTONS FOR THE SLICER/SHREDDER 
The control buttons are located on the front of the base. Press Low or High to 
select your desired speed.
Note: The Perfect Prep™ button is not recommended for use with the  
slicer/shredder.
Off 
The appliance should be stored in Off position and unplugged when not in use. 
High/Low Speed Control
  • When either speed is selected, the processor will run 
 
    continuously until the Off button is pressed.
  • On the first use for a particular ingredient, use the High 
 
    speed first, then turn down to Low as needed.
ASSEMBLING THE SLICER/SHREDDER
1. Place the slicer/shredder base on the motor base of the appliance with 
the arrow on the slicer/shredder base placed directly over the unlock  
symbol on the motor base.
2. Hold slicer/shredder base and rotate 
counterclockwise toward the lock  symbol 
until it clicks firmly into place (H). 
H
2
34
5
7
8
1
69 
						

							
8
9

3. Hold continuous flow disc with the smooth side up 
and place the disc with the hole directly over the 
center post. Match the opening in the center of the 
continuous flow disc with the notches on the center 
post. If necessary, rotate the disc counterclockwise 
until it drops in place just above the rim of the 
slicer/shredder base (J). 
4.  Select which side of the slicer/shredder disc you would like to use. For slicing, 
the slicing blade is facing up. For shredding, the shredding holes are facing up 
(K). 
Important: The slicer/shredder disc is very sharp. Use caution when handling 
and storing.
5. Holding the slicer/shredder disc with both hands by 
the outside edges to avoid the sharp blades, place 
the center opening directly over the center post of 
the slicer/shredder base. Rotate it clockwise until it 
locks into place just above the continuous flow disc 
(L). 
Note: If using the slicing blade, rotate the  
slicer/shredder disc until the slicing blade is just 
below where the continuous flow chute will be, 
to allow the blade to have a full revolution before 
coming in contact with the food to be sliced (M).
6.  Place the lid on the slicer/shredder base so 
that the safety lock tab is to the right of the 
safety lock latch. Twist the slicer/shredder lid 
counterclockwise until it locks into place (you 
will hear the click) (N). 
Important: For your protection this appliance has 
an interlock system. The slicer/shredder will not 
operate unless the lid is properly locked in place. 
7.  Insert the large food pusher into the feed chute. 
Insert the small food pusher into center of the 
large food pusher. Turn it clockwise until it locks 
into place (P).
J
L
M
N
P
KSHREDDERSLICER