JUICEMAN EXPRESS JM2000S User Manual


CustomerCare Line:	
For online customer service  and to register your product, go to 
www.prodprotect.com/applica 




Please Read and Save this Use and Care Book 
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always 
be followed including the following:
❍	Read all instructions.
❍	To protect against risk of electrical shock do not put cord, plugs or 
appliance in water or other liquid.
❍	Close supervision is necessary when any appliance is used by or near 
children.
❍	Unplug from outlet when not in use, before putting on or taking off 
parts, or before cleaning.
❍...




GETTING TO KNOW YOUR JUICEMAN® EXPRESS 
BASE 
.  Motor base
.  Off button
.  Low button
.  High button
.  Perfect Prep™ button
6.  Skid-resistant feet
7.  Spatula/cleaning brush (not shown)
Note: For part assemblies, please refer to the specific section for the attachment you wish to use. 
How to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material, and any stickers from the product; remove 
and save literature.
•  Please go to...

6
7

How to Use
CONTROL BUTTONS FOR THE JUICE EXTRACTOR
The control buttons are located on the front of the base. Press Low or High to 
select your desired speed. Refer to the SPEED CHART to help select the right 
speed for your produce.  
Note: The Perfect Prep™ button is not recommended for use with the juice 
extractor.
Low  
Use Low speed for softer produce like berries, citrus fruits, leafy vegetables 
and soft-skinned produce such as peaches, plums and cucumbers.
High  
Use High speed for harder...

8
9

• If desired, remove the skin. The skin can be left on all produce with the 
exception of:
  o All citrus fruits, including
  • Oranges
  • Grapefruit
  • Lemons
  • Limes
  • Tangerines
Note: The oil in the skin of these fruits tastes bitter and is difficult to digest.
Hint: Although the skin may be left on melons and pineapple, you may choose to 
remove them to maximize the fruit flavor in the finished drink.
• All pits and large seeds should be removed, including:
  o Apricots
  o Cherries
  o...

0


HOW TO USE JUICE EXTRACTOR
1. Follow the instructions on pages 8 and 9 to assemble the juice extractor. 
2.  Assemble the prepared fruits and/or vegetables to be used on the counter or in 
a bowl next to the juice extractor.
3. Place a clean glass for your juice under the juice 
spout (F). 
4.  Be sure the pulp container is in place. 
5.  Plug appliance into standard electrical outlet.
6.  Turn the power to the Low setting and allow to run 
10 seconds before placing any food into the...




HINTS AND TIPS FOR YOUR JUICE EXTRACTOR
• Do not put food into the juice extractor before turning the appliance on.
•  Let the appliance run for at least 10 seconds before placing any food into the 
feed chute.
•  Do not let the pulp container or juice glass overfill while using the machine. 
Turn the appliance off, wait for the motor to stop running and any juice to stop 
flowing. Empty the juice glass and/or pulp container. Be sure they are properly 
replaced before resuming...




TROUBLESHOOTING FOR THE  
JUICE EXTRACTOR
PROBLEMPOSSIBLE CAUSESOLUTION
Juice extractor will 
not start when speed 
button is depressed.
The juice extractor 
portion of the 
appliance may not be 
assembled correctly.
Check the ASSEMBLY 
instructions found on pages 
8 and 9.
The motor of the juice 
extractor seems to be 
struggling.• 
Pulp container may 
be full.
•  Pulp may have 
collected under the 
lid.
•  The speed selected 
may not be correct • 
Turn off the appliance. 
Empty...

6
7

SLICER/SHREDDER
GETTING TO KNOW YOUR JUICEMAN® EXPRESS SLICER/SHREDDER
† . Small food pusher / Measuring cup (Part # JM000S-0)
† .  Large food pusher (Part # JM000S-06)
  .  Large feed chute (remove small food pusher for small feed chute)
† .  Slicer/shredder lid (Part # JM000S-07)
† .  Slicer/shredder disc (Part # JM000S-08)
†  6.  Continuous flow disc (Part # JM000S-09)
  7.  Safety lock latch
†  8.  Slicer/shredder base (Part #...

8
9

3. Hold continuous flow disc with the smooth side up 
and place the disc with the hole directly over the 
center post. Match the opening in the center of the 
continuous flow disc with the notches on the center 
post. If necessary, rotate the disc counterclockwise 
until it drops in place just above the rim of the 
slicer/shredder base (J). 
4.  Select which side of the slicer/shredder disc you would like to use. For slicing, 
the slicing blade is facing up. For shredding, the shredding...