JBL Sdp5 Manual

SETUP 
Selecting the MAIN MENU SETUP option opens the SETUP menu as
shown below. SETUP menu option descriptions begin below and
continue throughout this section.
SETUPJBL Synthesis
3-2
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP

SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUTS
Prompts the selection of the desired input (i.e. DVD1). Selecting an
input opens the corresponding INPUT SETUP menu, which can be
used to change input names, assign audio and video...

SETUPSDP-5
3-3
LOCK OPTIONS
Opens the LOCK OPTIONS menu, which can be used to lock and
unlock settings in the MODE ADJUST, AUDIO CONTROLS, and
SETUP menu branches. Refer to page 3-56 for more information.
INPUT SETUP
Selecting the SETUP menu INPUTS option prompts the selection of
the desired input (i.e. DVD1) as shown below. Selecting an input
opens the corresponding INPUT SETUP menu shown at the right,
which can be used to change input names, assign audio and video
input connectors, select preferred...

DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CHL7FILM
%!D5.1 L7FILM
DTS-ES DTS-ES L7FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
3. When the desired character has been selected, press the Menu

arrow to advance to the next character space. Press the
Menu arrow to return to the previous character space. The
cursor will automatically wrap to the first character space when
the last character space is passed.
4. Repeat steps 2 and 3 to enter the...

SETUPSDP-5
3-5 The custom input name appears on the on-screen and front panel
displays. Both the custom and factory-default input names appear
on the input selection menu that opens when the SETUP menu
INPUTS option is selected. The custom input name appears against
the left margin of the on-screen display, and the factory-default
input name appears in parentheses against the right margin of the
on-screen display.
RESTORE DEFAULT NAME
Restores the factory-default name of the selected input. Factory-...

SETUPJBL Synthesis
3-6 The SDP-5 has eight configurable inputs, each of which can be
assigned to its eight digital audio, eight analog audio, five
composite video, five S-video, or three component video input
connectors. The table below lists the INPUT SETUP menu
parameters that can be used to assign audio and video input
connectors. The ANLG IN LVL parameter can be used to adjust
analog audio input levels for the selected input. These parameters
are highlighted on the INPUT SETUP menu shown above....

SETUPSDP-5
3-7
DIGITAL INCOAX-1 to 4, OPTICAL-1 to 4, NONE
Opens the DIGITAL IN menu shown above, which can be used to
assign a digital audio input connector for the selected input. The
SDP-5 has eight configurable inputs, each of which can be assigned
to any of its eight digital audio input connectors. 
Note:
The digital audio input connectors are compatible
with PCM (44.1, 48, 88.2, and 96kHz), Dolby
Digital, and dts(-ES) sources. The digital audio input
connectors are not compatible with MPEG (MP3)...

SETUPJBL Synthesis
3-8•The ANALOG IN menu labeled C (above) appears when the
REAR PANEL CONFIG menu 2 ST. & (2) 5.1 ANLG (3-46) option
is selected.
Please note the following:
•When no analog audio input connector is assigned, the SDP-5
will automatically set the MAIN ADV menu INPUT SELECT
parameter to DIGITAL (3-18).
•An analog audio input connector must be assigned when no
digital audio input connector is assigned. Refer to the previous
page for information about assigning a digital audio input...

SETUPSDP-5
3-9
ANLG IN LVL
Opens the ANLG IN LVL menu shown above, which can be used to
adjust 2-channel analog audio input levels for the selected input.
Despite attempts at standardization, analog audio sources have a
wide range of levels. To compensate for this, the SDP-5 allows
independent input level adjustment for each of its stereo analog
audio input connectors. Input level adjustment is not available
for either of the 5.1-channel analog audio input connectors.
Note:
Adjustments made on the ANLG...

SETUPJBL Synthesis
3-10
AUTO GAIN
Indicates the current amount of input level adjustment for the
selected stereo analog audio input connector. When the ANLG IN
LVL menu AUTO parameter is set to ON, the AUTO GAIN parameter
indicates the amount of automatic input level adjustment. When
the AUTO parameter is set to OFF, the AUTO GAIN parameter
indicates the amount of manual input level adjustment. (In other
words, the AUTO GAIN parameter reflects the setting of the ANLG
IN LVL menu MANUAL parameter.) 
When...

SETUPSDP-5
3-11
LEVEL METERS
Indicate fluctuating input levels in the front left (L) and front right
(R) channels for the selected input. These level meters are also
included on the STATUS menus, allowing them to indicate input
levels for both analog and digital audio input sources. However,
ANLG IN LVL menu input level adjustments only affect 2-channel
analog audio input sources.
Level meters appear in combinations of green, yellow, and red
when the on-screen display is configured for a blue-screen...