JBL Sdp5 Manual
Have a look at the manual JBL Sdp5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 JBL manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SETUP Selecting the MAIN MENU SETUP option opens the SETUP menu as shown below. SETUP menu option descriptions begin below and continue throughout this section. SETUPJBL Synthesis 3-2 MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS INPUTS Prompts the selection of the desired input (i.e. DVD1). Selecting an input opens the corresponding INPUT SETUP menu, which can be used to change input names, assign audio and video input connectors, select preferred listening modes, and configure advanced Main Zone and Zone 2 input settings. Refer to the next page for more information. SPEAKERS Opens the SPEAKER SETUP menu, which can be used to configure the Main Zone audio output connectors for the desired speaker setup, set speaker distances, and calibrate output levels. Refer to page 3-26 for more information. SPEAKERSSETUP INPUTSSETUP REAR PANEL CONFIG Opens the REAR PANEL CONFIG menu, which can be used to configure the analog audio input connectors as eight stereo connectors, one 5.1-channel and five stereo connectors, or two stereo and two 5.1-channel connectors. Refer to page 3-45 for more information. DISPLAYS Opens the DISPLAY SETUP menu, which can be used to customize the on-screen and front panel displays, restore audio/video synchronization, and activate and create a custom unit name. Refer to page 3-47 for more information. VOLUME CONTROLS Opens the VOLUME CONTROL SETUP menu, which can be used to configure Main Zone and Zone 2 volume levels. Refer to page 3-53 for more information. TRIGGER Opens the TRIGGER SETUP menu, which can be used to configure the trigger output connector labeled 1. Refer to page 3-54 for more information. TRIGGERSETUP VOLUME CONTROLSSETUP DISPLAYSSETUP REAR PANEL CONFIGSETUP
SETUPSDP-5 3-3 LOCK OPTIONS Opens the LOCK OPTIONS menu, which can be used to lock and unlock settings in the MODE ADJUST, AUDIO CONTROLS, and SETUP menu branches. Refer to page 3-56 for more information. INPUT SETUP Selecting the SETUP menu INPUTS option prompts the selection of the desired input (i.e. DVD1) as shown below. Selecting an input opens the corresponding INPUT SETUP menu shown at the right, which can be used to change input names, assign audio and video input connectors, select preferred listening modes, and configure advanced Main Zone and Zone 2 input settings. INPUT SETUP(INPUT)INPUTSSETUP LOCK OPTIONSSETUP MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS INPUTS INPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL CD INPUT SETUP NAME CD DIGITAL IN COAX-3 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN COMPOSITE-1 COMPONENT IN NONE 2-CH L7 MUSIC %!D5.1 L7MUSIC DTS-ES DTS-ES L7MUSIC MAIN ADVANCED ZONE2 IN DIGITAL TUNER INPUT SETUP NAME TUNER DIGITAL IN NONE ANALOG IN ANALOG-4 ANLG IN LVL +0dB VIDEO IN NONE COMPONENT IN NONE 2-CH L7 MUSIC %!D5.1 L7MUSIC DTS-ES DTS-ES L7MUSIC MAIN ADVANCED ZONE2 IN ANLG AUX INPUT SETUP NAME AUX DIGITAL IN OPTICAL-3 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN COMPOSITE-2 COMPONENT IN NONE 2-CH L7 MUSIC %!D5.1 L7MUSIC DTS-ES DTS-ES L7MUSIC MAIN ADVANCED ZONE2 IN DIGITALTV INPUT SETUP NAME TV DIGITAL IN OPTICAL-2 ANALOG IN ANALOG-3 ANLG IN LVL +0dB VIDEO IN S-VIDEO-5 COMPONENT IN NONE 2-CHL7TV %!D5.1 L7TV DTS-ES DTS-ES L7FILM- MAIN ADVANCED ZONE2 IN ANLG SAT INPUT SETUP NAME SAT DIGITAL IN OPTICAL-1 ANALOG IN ANALOG-1 ANLG IN LVL +0dB VIDEO IN S-VIDEO-3 COMPONENT IN 3 2-CHL7TV %!D5.1 L7TV DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN ANLG VCR INPUT SETUP NAME VCR DIGITAL IN NONE ANALOG IN ANALOG-2 ANLG IN LVL +0dB VIDEO IN S-VIDEO-4 COMPONENT IN NONE 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN ANLG DVD2 INPUT SETUP NAME DVD2 DIGITAL IN COAX-2 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-2 COMPONENT IN 2 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL All INPUT SETUP menus are shown at the right. The parameters on the left side of the INPUT SETUP menus are identical regardless of which input is selected. The parameter settings on the right side are adjustable. Default parameter settings differ from input to input. The INPUT SETUP menus to the right indicate factory-default parameter settings for each input.
DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL 3. When the desired character has been selected, press the Menu arrow to advance to the next character space. Press the Menu arrow to return to the previous character space. The cursor will automatically wrap to the first character space when the last character space is passed. 4. Repeat steps 2 and 3 to enter the desired input name. 5. When the desired input name has been entered, press the Menu arrow to close the EDIT INPUT NAME drop-down menu and return to the INPUT NAME menu.EDIT INPUT NAME Opens the EDIT INPUT NAME drop-down menu shown above, which can be used to customize the name of the selected input. To customize the name of the selected input: 1. Follow the EDIT INPUT NAME menu path to open the EDIT INPUT NAME drop-down menu. 2. When the EDIT INPUT NAME drop-down menu opens, press the remote control Menu and arrows to change the character above the cursor (^). EDIT INPUT NAMENAMEDVD1INPUTSSETUP SETUPJBL Synthesis 3-4 MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1NAME DVD1 DVD1 INPUT NAME EDIT INPUT NAME RESTORE DEFAULT NAMEEDIT INPUT NAME DVD1 WYBUTTONS TO EDIT UP TO 8 CHARACTERS VBUTTON TO ADVANCE ^ The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. CHANGING INPUT NAMES (NAME) Selecting the INPUT SETUP menu NAME parameter opens the INPUT NAME menu shown below, which can be used to customize or restore the factory-default name of the selected input. Factory-default input names correspond to front panel and remote control input selection button labels. NAMEDVD1INPUTSSETUP EDIT INPUT NAME
SETUPSDP-5 3-5 The custom input name appears on the on-screen and front panel displays. Both the custom and factory-default input names appear on the input selection menu that opens when the SETUP menu INPUTS option is selected. The custom input name appears against the left margin of the on-screen display, and the factory-default input name appears in parentheses against the right margin of the on-screen display. RESTORE DEFAULT NAME Restores the factory-default name of the selected input. Factory- default input names correspond to front panel and remote control input selection button labels. RESTORE DEFAULT NAMENAMEDVD1INPUTSSETUP To restore the factory-default name of the selected input: 1. Follow the RESTORE DEFAULT NAME menu path to open the INPUT NAME menu. 2. When the INPUT NAME menu opens, press the remote control Menu and arrows to highlight the RESTORE DEFAULT NAME option. 3. When the RESTORE DEFAULT NAME option is highlighted, press the Menu arrow to select this option. The message “PRESS MENU VTO RESTORE INPUT NAME” appears on the on-screen and front panel displays. 4. When this message opens, press the Menu arrow to restore the factory-default name of the selected input and close the message. (Press the Menu arrow to close the message withoutrestoring the factory-default name of the selected input.) DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITALMAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1NAME DVD1 DVD1 INPUT NAME EDIT INPUT NAME RESTORE DEFAULT NAME The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. RESTORE DEFAULT NAME PRESS MENU VTO RESTORE INPUT NAME
SETUPJBL Synthesis 3-6 The SDP-5 has eight configurable inputs, each of which can be assigned to its eight digital audio, eight analog audio, five composite video, five S-video, or three component video input connectors. The table below lists the INPUT SETUP menu parameters that can be used to assign audio and video input connectors. The ANLG IN LVL parameter can be used to adjust analog audio input levels for the selected input. These parameters are highlighted on the INPUT SETUP menu shown above. Parameter Possible Settings DIGITAL IN COAX-1 to 4, OPTICAL-1 to 4, NONE ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), NONE ANLG IN LVL AUTO, -18 to +12dB VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE COMPONENT IN COMPONENT 1 to 3, NONE ASSIGNING AUDIO & VIDEO INPUT CONNECTORS DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL AUTO VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL DIGITAL IN COAX-1ANALOG IN NONEANLG IN LVL +0dBVIDEO IN S-VIDEO-1COMPONENT IN 1 MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
SETUPSDP-5 3-7 DIGITAL INCOAX-1 to 4, OPTICAL-1 to 4, NONE Opens the DIGITAL IN menu shown above, which can be used to assign a digital audio input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its eight digital audio input connectors. Note: The digital audio input connectors are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital, and dts(-ES) sources. The digital audio input connectors are not compatible with MPEG (MP3) sources. DIGITAL INDVD1INPUTSSETUP Please note the following: •When no digital audio input connector is assigned, the SDP-5 will automatically set the MAIN ADV menu INPUT SELECT parameter to ANALOG (3-18). •A digital audio input connector must be assigned when no analog audio input connector is assigned. Refer to the next page for information about assigning an analog audio input connector. . . . Assigning Audio & Video Input Connectors continues on page 3-8 DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL DIGITAL IN COAX-1 DVD1 DIGITAL IN COAX-1 COAX-2 COAX-3 COAX-4 OPTICAL-1 OPTICAL-2 OPTICAL-3 OPTICAL-4 NONEMAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
SETUPJBL Synthesis 3-8•The ANALOG IN menu labeled C (above) appears when the REAR PANEL CONFIG menu 2 ST. & (2) 5.1 ANLG (3-46) option is selected. Please note the following: •When no analog audio input connector is assigned, the SDP-5 will automatically set the MAIN ADV menu INPUT SELECT parameter to DIGITAL (3-18). •An analog audio input connector must be assigned when no digital audio input connector is assigned. Refer to the previous page for information about assigning a digital audio input connector. ANALOG INANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), NONE Opens the ANALOG IN menu shown above, which can be used to assign an analog audio input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its eight analog audio input connectors. The appearance of the ANALOG IN menu depends on the configuration of the analog audio input connectors. •The ANALOG IN menu labeled A (above) appears when the REAR PANEL CONFIG menu 8 STEREO INPUTS option (3-45) is selected. •The ANALOG IN menu labeled B (above) appears when the REAR PANEL CONFIG menu 5 ST. & (1) 5.1 ANLG option (3-45) is selected. ANALOG INDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL ANALOG IN NONE MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. Assigning Audio & Video Input Connectors(continued from page 3-7) DVD1 ANALOG IN ANALOG-1 ANALOG-2 ANALOG-3 ANALOG-4 ANALOG-5 ANALOG-6 ANALOG-7 ANALOG-8 NONE DVD1 ANALOG IN ANALOG-1 ANALOG-2 5.1 ANLG (3-5) 5.1 ANLG (6-8) NONE DVD1 ANALOG IN ANALOG-1 ANALOG-2 ANALOG-3 ANALOG-4 ANALOG-5 5.1 ANLG (6-8) NONE ABC
SETUPSDP-5 3-9 ANLG IN LVL Opens the ANLG IN LVL menu shown above, which can be used to adjust 2-channel analog audio input levels for the selected input. Despite attempts at standardization, analog audio sources have a wide range of levels. To compensate for this, the SDP-5 allows independent input level adjustment for each of its stereo analog audio input connectors. Input level adjustment is not available for either of the 5.1-channel analog audio input connectors. Note: Adjustments made on the ANLG IN LVL menu are applied to the stereo analog audio input connector assigned for the selected input. When another stereo analog audio input connector is assigned, these adjustments are automatically applied to the new connector. ANLG IN LVLDVD1INPUTSSETUP AUTOON, OFF Provides automatic adjustment of 2-channel analog audio input levels. When set to ON, the SDP-5 automatically monitors and optimizes input levels. When the input signal is too high, the SDP-5 quickly decreases input levels to avoid overload. When the input signal is too low, the SDP-5 slowly increases input levels to maximize the signal-to-noise ratio and dynamic range. When the AUTO parameter is set to OFF, the SDP-5 does not provide automatic adjustment of 2-channel analog audio input levels. Rather, input levels must be adjusted with the ANLG IN LVL MANUAL parameter (next page). . . . Assigning Audio & Video Input Connectors continues on page 3-10 AUTOANLG IN LVLDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL AUTO VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL ANLG IN LVL +0dB MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 ANLG IN LVL AUTO ON MANUAL +0dB AUTO GAIN +0.0dB LCRSL SR SB LFE XXXXXX X 0 -6 -15 -30 -45dB AUTO OFFON OFF
SETUPJBL Synthesis 3-10 AUTO GAIN Indicates the current amount of input level adjustment for the selected stereo analog audio input connector. When the ANLG IN LVL menu AUTO parameter is set to ON, the AUTO GAIN parameter indicates the amount of automatic input level adjustment. When the AUTO parameter is set to OFF, the AUTO GAIN parameter indicates the amount of manual input level adjustment. (In other words, the AUTO GAIN parameter reflects the setting of the ANLG IN LVL menu MANUAL parameter.) When the AUTO parameter is set to ON, the AUTO GAIN parameter continues to indicate the amount of manual input level adjustment until automatic adjustments have been made. AUTO GAINANLG IN LVLDVD1INPUTSSETUP MANUAL-18 to +12dB Provides manual adjustment of 2-channel analog audio input levels. When manualadjustments are made, the SDP-5 automatically sets the ANLG IN LVL menu AUTO parameter to OFF and deactivates automatic input level adjustment. Manual input level adjustments are retained when the AUTO parameter is set to ON. Note: When the AUTO parameter is set to ON, the SDP-5 will not make adjustments that exceed the ANLG IN LVL menu MANUAL parameter setting. MANUALANLG IN LVLDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL AUTO VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL ANLG IN LVL +0dB MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. DVD1 ANLG IN LVL AUTO OFF MANUAL +0dB AUTO GAIN +0.0dB LCRSL SR SB LFE XXXXXX X 0 -6 -15 -30 -45dB MANUAL +0dB -18 to +12dB Assigning Audio & Video Input Connectors(continued from page 3-9)
SETUPSDP-5 3-11 LEVEL METERS Indicate fluctuating input levels in the front left (L) and front right (R) channels for the selected input. These level meters are also included on the STATUS menus, allowing them to indicate input levels for both analog and digital audio input sources. However, ANLG IN LVL menu input level adjustments only affect 2-channel analog audio input sources. Level meters appear in combinations of green, yellow, and red when the on-screen display is configured for a blue-screen back- ground. Green indicates low levels, yellow indicates normal levels, and red indicates the onset of overload. Level meters appear in white when the on-screen display is not configured for a blue- screen background. ANLG IN LVLDVD1INPUTSSETUP VIDEO INCOMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE Opens the VIDEO IN menu shown above, which can be used to assign a composite or S-video input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its five composite or five S-video input connectors. Please note the following: •Composite video output connectors are available when a composite or S-video source is present. •S-video output connectors are available when an S-video source is present. •Component video output connectors are available when a component video source is present. . . . Assigning Audio & Video Input Connectors continues on page 3-12 VIDEO INDVD1INPUTSSETUP DVD1 INPUT SETUP NAME DVD1 DIGITAL IN COAX-1 ANALOG IN NONE ANLG IN LVL +0dB VIDEO IN S-VIDEO-1 COMPONENT IN 1 2-CHL7FILM %!D5.1 L7FILM DTS-ES DTS-ES L7FILM MAIN ADVANCED ZONE2 IN DIGITAL VIDEO IN S-VIDEO-1 MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONSINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER AUX INPUTSDVD1 The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted. VIDEO IN COMPOSITE-1 COMPOSITE-2 COMPOSITE-3 COMPOSITE-4 COMPOSITE-5 S-VIDEO-1 S-VIDEO-2 S-VIDEO-3 S-VIDEO-4 S-VIDEO-5 NONE