JBL Sdp5 Manual

SETUPJBL Synthesis
3-52
BACKGROUNDON, OFF
Activates and deactivates the menu background. When set to ON,
on-screen display menus appear over a solid blue or gray
background (depending on the display device). When set to OFF,
on-screen display menus appear over the video input signal. 
Note:
When the BACKGROUND parameter is set to OFF, the
on-screen display will disappear if the display device
is using the component video output connector.
BACKGROUND
ON-SCREEN DISPLAY
DISPLAYS
SETUP
REMOTE STATEON, OFF...

SETUPSDP-5
3-53
FRONT PANEL DISPLAY SETUP
Opens the FRONT PANEL DISPLAY menu shown above, which can
be used to customize the front panel display.
Default Possible
Parameter Setting Settings
STATUS ALWAYS ON ALWAYS ON, 2 SECONDS,
ALWAYS OFF
BRIGHTNESS 75% 100%, 75%, 50%, 25%
STATUSALWAYS ON, 2 SECONDS, ALWAYS OFF
Activates and deactivates the front panel display. When set to
ALWAYS ON, the front panel display remains on at all times. When
set to 2 SECONDS, the front panel display appears for 2 seconds...

SETUPJBL Synthesis
3-54
VOLUME CONTROL SETUP
Selecting the SETUP menu VOLUME CONTROLS option opens the VOLUME CONTROL SETUP menu shown below, which can be used to
configure Main Zone and Zone 2 volume levels.
VOLUME CONTROLS
SETUP
Default Possible
Parameter Setting Settings
MAIN PWR ON -30dB LAST LVL, -80 to +6dB
MUTE LEVEL
FULL MUTE FULL MUTE, -40dB, -30dB, -20dB,
-10dB
ZONE PWR ON -30dB LAST LVL, -80 to +6dB
MAIN PWR ONLAST LVL, -80 to +6dB
Sets the Main Zone volume level that will be selected whenever...

SETUPSDP-5
3-55 PWR – the power trigger output connector – is not configurable. It is activated when the
SDP-5 is activated, and deactivated when the SDP-5 is deactivated. The trigger output
connector labeled 1 can be configured for remote or program operation.
Default Possible
Parameter Setting Settings
REMOTE ONLY OFF ON, OFF
Program Operation N/A ON, OFF
All TRIGGER SETUP menu parameters – except the REMOTE ONLY
parameter – are considered program operation parameters.
REMOTE ONLYON, OFF
Configures the...

SETUPJBL Synthesis
3-56 When the REMOTE ONLY parameter is set to OFF and program operation parameters are set to
ON, the trigger output connector labeled 1 is associated with the corresponding Main Zone
input, Main Zone listening modes, or Zone 2 inputs. (The connector cannot be associated with
individual Zone 2 inputs; rather, it can be associated with the Zone 2 inputs as a group.) When
configured for program operation, the connector is activated when the corresponding inputs
and listening modes are...

SETUPSDP-5
3-57 Default Possible
Parameter Setting Settings
MODES UNLOCKED LOCKED, UNLOCKED
AUDIO CNTRL  UNLOCKED LOCKED, UNLOCKED
SETUP UNLOCKED LOCKED, UNLOCKED
MODESLOCKED, UNLOCKED
Controls MODE ADJUST menu branch settings, which include all
listening mode menu settings. When set to LOCKED, these settings
cannot be adjusted. When set to UNLOCKED, these settings can be
adjusted.
MODES
LOCK OPTIONS
SETUP
AUDIO CNTRLLOCKED, UNLOCKED
Controls AUDIO CONTROLS menu branch settings. When set to
LOCKED, these...

SETUPJBL Synthesis
3-58 

4
AUDIO CONTROLS
AUDIO CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 

BASS-6.0 to +6.0dB
Controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, and
Subwoofer. The graph shown on the left of the next page illustrates
the frequency response of BASS parameter settings.
TREBLE-6.0 to +6.0dB
Controls the amount of boost or cut applied to the Main Zone
audio output connectors labeled Front L/R and Center. The graph
shown on the right of the next page illustrates the frequency
response of TREBLE parameter...

AUDIO CONTROLSSDP-5
4-3
10 20 50 100 200 5001k 2k 5k 10k 20kHz
+6.0
+5.5
+5.0
+4.5
+4.0
+3.5
+3.0
+2.5
+2.0
+1.5
+1.0
+0.5
+0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
-4.5
-5.0
-5.5
-6.0+0.0
BASS Parameter Settings
The BASS parameter (previous page) controls the amount of low-frequency boost or
cut applied to the Main Zone audio output connectors labeled Front L/R, Center, and
Subwoofer.
10 20 50 100 200 5001k 2k 5k 10k 20k
Hz
+0.0+6.0
+5.5
+5.0
+4.5
+4.0
+3.5
+3.0
+2.5
+2.0
+1.5
+1.0
+0.5
+0.0
-0.5...