JBL Dcr600 2 Manual

21
Component Video Outputs:If your TV or
video projector has component video inputs,
you may connect these output jacks to the set
for the highest video quality available. Note
that the component video inputs may be
labeled as Y/Pr/Pb or Y/Cr/Cb but, for connec-
tion purposes, they are the same. The outputs
of these jacks should NOT be connected to a
standard composite video input.
S-Video Output:Connect this jack to the
S-Video input on a television or video projector,
or to an S-Video input on an A/V...

22
Remote Control Functions
IMPORTANT NOTE:The remote control for
the JBL Cinema ProPack 600
IImay be pro-
grammed to control up to eight devices, includ-
ing the DCR600
IIand DVD600II. It is helpful to
think of the remote as being organized into
“pages,” with one page for each device.
Depending on which device has been selected,
the buttons on that device’s page will perform
different functions, as listed starting on the
next page. These functions may vary from the
labels on the remote, and from one...

23
eStatus Button: This button operates only
when the DVD600
IIhas been selected. When a
disc is playing, pressing this button will display
the Status Banner, which contains information
about the disc and enables you to change the
functions.
fgM1 and M2 Macro Buttons/Open-
Close Button:
Press these buttons to store or
recall a “Macro”, which is a preprogrammed
sequence of commands stored in the remote.
When the DVD600
IIhas been selected, the M1
Button
ffunctions to open or close the disc
tray drawer. (...

24
yto select the channel being adjusted,
followed by the 
Set Button. You may 
then use the ⁄/¤Buttons yagain to
change the level for that channel. Press the
Set Buttonto lock in the setting.
When using the DVD600
IIto play a DVD disc,
this button functions as a Title button, and dis-
plays the disc’s Title Select Menu, or a symbol
(

) if the disc either does not offer this func-
tion or has only one title.
When the Video 3 input has been programmed
for a cable or satellite service, this button will...

25
Preset Up/Down/Slow-Play
Buttons:
When the tuner is in use, press these
buttons to scroll through the stations pro-
grammed into the receiver’s memory.  
When a DVD disc is playing and the DVD600
II
has been selected, press these buttons to
move forward or backward through the disc in
slow speed. Each press of these buttons
changes the slow-play speed in the following
order: 1/16 Normal Speed 
➔1/8 Normal
Speed 
➔1/4 Normal Speed ➔1/2 Normal
Speed. To resume normal play, press the
Play/Pause Button....

26
Remote Control Function Grid
MAIN
DVD CD/CD-R Tape VCR 1 (VID 1) VCR 2 (VID 2) CBL (VID 3) SAT (VID 3) TV#ButtonDCR600II+DVD600II
01 POWER OFF Power Off Power Off Power Off Power Off Power Off Power Off Power Off Power Off
02 POWER ON Power On Power On Power On Power On Power On Power On Power On Power On
03 MUTE Mute
04 DVD DVD Input Select DVD  Select DVD  Select DVD  Select DVD  Select DVD  Select DVD  Select DVD  Select DVD  Select
05 STATUS STATUS
06 M1 M1 Open/Close Open/Close Cancel Cancel PPV...

27
Remote Control Function Grid
#MAIN DVD CD/CD-R Tape VCR 1 (VID 1) VCR 2 (VID 2) CBL (VID 3) SAT (VID 3) TV
37 5 5 5 5 5 5 5 5 5
38 6 6 6 6 6 6 6 6 6
39 7 7 7 7 7 7 7 7 7
40 8 8 8 8 8 8 8 8 8
41 Tun-M Tuner Mode Angle Select Random Play Bypass Next
42 9 9 9 9 9 9 9 9 9
43 0 0 0 0 0 0 0 0 0
44 Memory Memory
45 Tuning Up Tune Up Step +Day+ Day+
46 Direct Direct Tuner EntryProgram, Chapter DirectTrack Direct
47 Clear Clear Clear Clear Clear Clear Clear Clear Clear
48 Preset Up Preset Tune Up Slow Forward...

28
Remote Control Code Tables
TV
Maker (Brand) Name Setup Code Number
A-MARK 103 132 
ADMIRAL 192
AKAI 123 160
AMPRO 164
ANAM 045 103 106 109 112 122
AOC 103 123 128
BLAUPUNKT 084
BROKSONIC 205 206
CANDLE 123 128
CAPEHART 059
CENTURION 123 171
CETRONIC 045
CITIZEN 045 123 128 132
CLASSIC 045
CONCERTO 128
CONTEC 045
CORANDO 172
CORONADO 132
CRAIG 045 157 158 159
CROWN 045 132
CURTIS MATHES 123  128  132
CXC 045
DAEWOO 045 087 102 105 106 108 111 114 116 119 127 128 132
DAYTRON 128 132
CIGI LINK 200...

29
Remote Control Code Tables
TV
Maker (Brand) Name Setup Code Number
MGA 115 123 128
MINERVA 084
MITSUBISHI 077 115 123 128 160 167 168
MTC 175 176
NATIONAL 148 177 179 180 181 182
NEC 115 121 123 125
NIKEI 045 
ONKING 045
ONWA 045
OPTONICA 077
ORION 207 208 209 210 211
PANASONIC 087 148 169
PHILCO 045 115 123 128 132 148
PHILIPS 123 128 132 145 148
PIONEER 024 123 128 213 214
PORTLAND 128 132
PROSCAN 133
PROTON 059 122 128 132 165
QUASAR 087
RADIO SHACK 045  128  132  180  196  197
RCA 115 123 128 133...

30
Remote Control Code Tables
VCR
Maker (Brand) Name Setup Code Number
AIWA 040
AKAI 048 108 109 126
AMPRO 076
AMSTRAD 133
ASA 134
AUDIO DYNAMICS 018  048
BROKSONIC 110 147 166
CANDLE 134 135 140
CANON 135 140
CAPEHART 094
CITIZEN 134 140
CRAIG 094
DAEWOO 134
DAYTRON 045 116
DBX 017 094 104 105
DUAL 094
DYNATECH 018 048
ELECTROHOME 136
EMERSON 040
FERGUSON 131
FINLUX 013 040 042 105 110 112 119 134 143
FISHER 136
FUNAI 133
GE 017 142
GO VIDEO 113  117
GOLDSTAR 018 107 134
GRAETZ 136
HARMAN KARDON 018...