JBL Dcr600 2 Manual

41
Configuring the DCR600IIReceiver
7. Press the Set Button^.
8. Select the Dolby Digital mode either by press-
ing the front panel 
Surround Mode Selector
7or by pressing the Surround Mode
Selector 
ton the remote until 
DOLBY DIGappears in the Main
Information Display
U.
9. Press the Delay Button&on the
remote or front panel. The words 
SDELAY TIMEappear in the 
Main Information DisplayU.
10. Press the ⁄/¤Buttonsyon the
remote once, so that 
CDELAY TIME
appears in the Main Information Display
Uor in...

42
Remote Control Functions
The JBL Cinema ProPack 600IIis equipped with
a powerful remote control that will control the
functions of not only the DCR600
IIreceiver and
DVD600
IIDVD changer, but also most popular
brands of audio and video equipment, including
CD players, cassette decks, TV sets, cable boxes,
VCRs, satellite receivers and other home theater
equipment. Once the remote is programmed
with the codes for the products you own, it is
possible to eliminate most other remotes and
replace them with...

43
Remote Control Functions
Programming Macros 
Macros enable you to easily repeat frequently
used combinations of commands with the press
of a single button on the remote control. Once
programmed, a macro will send out up to 19 
different remote codes in a predetermined
sequential order, enabling you to automate the
process of turning on your system, changing
devices, or other common tasks. The remote can
store up to three separate macro command
sequences: one that is associated with the Power
On...

44
Remote Control Functions
• Press the MAIN Selectorh.
• Press the 
Mute Buttoncto store the
DCR600
II’s Power On command.
• Press the 
TV Input Selector Buttono
to indicate the next command is for “TV
Power On.”
• Press the 
Mute Buttoncto store the
TV Power On command.
• Press the 
VID 3 Input Selector Button
nto indicate the next command is for
“Cable Power On.”
• Press the 
Mute Buttoncto store the
Cable Power On command.
• Press the 
Macro 1 Buttonfto com-
plete the process and store the macro...

45
Remote Control Functions
Channel Control Punch-Through
The remote may be programmed to operate so
that the channel control function for either the
TV, cable or satellite receiver used in your system
may be used in conjunction with one of the other
devices controlled by the remote. For example,
while using and controlling the VCR, you may
wish to change channels on a cable box or satel-
lite receiver without having to change the device
selected by the DCR600
IIor the remote. To pro-
gram the remote for...

46
Configuring the DVD600IIDVD Changer
DVD Compatibility &
Terminology
The DVD600IIis more than a DVD player; 
it will play the following disc formats:
•Both 5-inch (12cm) and 3-inch (8cm) discs
•CD audio discs
•DTS audio discs
•CD-R audio discs
•CD-RW audio discs
•DVD movie discs
•VCD (video CD) discs
•MP3 audio discs
However, it will NOT play the following:
•DVD discs with a Region Code other than 
the one for which the player is set
•DVD discs with PAL format video
•DVD-Audio discs
•DVD-ROM data...

47
Configuring the DVD600IIDVD Changer
only one title, but some may have more than
one, to give you a “Double Feature” presenta-
tion or to include special presentations that take
you “behind the scenes” of the main feature.
Press the Title button to see a listing of the
titles on a disc. When a disc has only one title,
pressing the Title button may show a list of the
chapters.
The DVD600IIis turned on in two steps.
First, press the Main Power Switchon
the front panel until it latches and the 
Power...

48
Configuring the DVD600IIDVD Changer
Note that when a default subtitle language is
selected, it will be used whenever that lan-
guage is present on the DVD disc being played.
However, when that language is not present,
the language used will be the one prepro-
grammed into the disc itself. (Again, typically
that default will be English for discs sold in
Region 1, but the selection will vary at the 
discretion of each disc’s producer.)
Although the default will set the language that
will be used when...

49
Configuring the DVD600IIDVD Changer
Figure 7
To enter a password, you may either enter the
four-digit number directly, using the 
Numeric
Keys
–, or you may use the
⁄/¤Buttonsyto select the number
for a position, and then press the 
›Button
to move to the next position. Note that as each
number is entered, it will turn to a solid circle
when you move to the next position to protect
the password’s privacy. When all four numbers
of the password have been entered, press the
Enter Button .
After the...

50
Configuring the DVD600IIDVD Changer
Once the new password has been entered, the
system remains locked with the new password
in effect. Press the 
‹Button`to return to
the main menu. If you have no other changes to
make after setting this default, press the 
Menu
Button
zto remove the Setup Menu from the
screen, or press the 
Play/Pause Button
to begin or resume playback.
Setting the Aspect Ratio
The aspect ratio of a television picture is the
relationship between its width and height, and
it defines...