JBL Dcr600 2 Manual
Here you can view all the pages of manual JBL Dcr600 2 Manual. The JBL manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 61
61 Operating the DVD600IIDVD Changer MP3 Disc Playback When the DVD600IIreads a disc and recognizes it as an MP3 disc, no Disc Type Indicator will light; however, a listing of all the directories and tracks on the disc will appear on the video screen. (Figure 23). Note that the right side of the screen will initially be blank, as that is used for programming playlists for MP3 playback. The black box in the upper left corner of the screen will show the Play symbol while a track is play- ing, or the...
Page 62
62 Operating the DVD600IIDVD Changer There are two versions of the VCD format: an early version which is simply called “VCD” and a later version with Playback Control which is called “Version 2.0” or “PBC”. The DVD600 IIis compatible with both forms of VCD, although playback will vary according to which version is used and the specific way in which the disc was created. However, the DVD600 IIis not capable of playing SVCD (Super Video CD) discs. Also, do not con- fuse the Video CD format with the photo...
Page 63
63 Operating the DVD600IIDVD Changer Programmed Play The DVD600IIis equipped with a wide range of programmed play functions that enable you to have the unit select or repeat tracks for you, or you may program a specific order for discs and tracks to play. Random Play The Random Play function will play all of the tracks on a CD or chapters on a DVD in a ran- dom order, as selected by the DVD600 II. Once the disc has played all of the tracks, it will stop. To select Random Play at any time while a CD or...
Page 64
64 Operating the DVD600IIDVD Changer 5. The third box will now be highlighted to indi- cate that a selection for chapter should be made. This choice is available only for DVD discs, as CD discs do not have chapter capa- bility. The number in parentheses under the box shows the maximum number of chapters on the disc. If “999” appears, it indicates that the disc selected has not yet been played and the unit does not yet know the type of disc and how many titles or tracks are available. If “0” appears, this...
Page 65
65 Operating the DVD600IIDVD Changer DVD Language Codes The availability of specific languages for the main audio track or subtitles is dependent on the choices made by a disc’s producer. You should always consult the disc’s jacket for information on languages for any disc. In the case of some languages, you may be required to enter a code from the list below to access that language. See pages 47 and 48 for more information on entering language codes. Language Code Abkhazian 6566 Afar 6565 Afrikaans...
Page 66
66 Troubleshooting Processor Reset In the rare case where the receiver’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. To clear the receiver’s entire system memory including...
Page 67
67 Troubleshooting No sound from one speaker • No audio signal is being transmitted • Check all wires and connections between the DCR600IIand to the speakersspeakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured. • In Dolby Digital or DTS modes, make sure that the DCR600 II is configured so that the speaker in question is enabled. No sound from surround or • Incorrect surround mode • Select a mode other than Stereo. center speakers • Make sure the...
Page 68
68 Troubleshooting Disc does not play • Disc loaded improperly • Load disc label-side up. • Incorrect disc type • Check to see that disc is CD, CD-R, CD-RW, DVD-Movie, MP3 or Video CD; other types will not play. • Invalid Region Code • Use Region 1 disc only. • Rating is above parental preset • Enter password to override or change rating settings. • Wrong source for CD was selected • If you are playing a CD in the DVD600 II, you must select the DVD source on the DCR600 II, not the CD source. No...
Page 69
69 JBL On Screen Library is a trademark of JBL, Inc. (patent pending). JBL One-Click is a trademark of JBL, Inc. (patent pending). *Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved. DTS and DTS Surround are registered trademarks of Digital Theater Systems, Inc. UltraStereo is a trademark of UltraStereo Corp. Logic 7 is a...
Page 70
70 Playback Media:5-inch (12cm) or 3-inch (8cm) DVD-Video: Region 1, single or dual sides/layers, linear PCM, Dolby Digital or DTS CD, CD-R, CD-RW: Linear PCM Audio MP3 Video CD (VCD): MPEG-1 Video, Linear PCM Audio Video Section: Signal format: NTSC Composite Output: 1V p-p/75 ohms, sync, negative polarity S Output: Y/Luminance: 1V p-p/75 ohms, sync, negative polarity C/Chrominance: 0.286V p-p Component Outputs: Y: 1V p-p/75 ohms, sync, negative polarity Pr: 0.648V p-p/75 ohms Pb: 0.648V p-p/75 ohms...
All JBL manuals