Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCE
INS-TIONIssue 1, November 1994Optional Data Port Modules
7.36All Inter-Tel/DVKkeysets maybe equipped with
optional Data Port Modules (refer to REPLACEMENT
PARIS for the part number). The Data Port Module con-
tains a four-conductor modular jack that can be used to
connect eirher a data device (such as a persona1 comput-
er with a direct-connect modem) or an LRA and an 
ex-
ternal signaling device (such as a loud bell, horn,
5ashing light, etc.) to...

INS’lXLJATIONIssue 1, November 1994lNTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCE
FIGURE 3-49.INTER-TEL/DVK DATA PORT MODULE INS’ll4LLXI’ION~‘\
i2’
JUMPERSTRAPS
SITING FOR
SETTING
DATA DEVICE
FOR LRA
MODULARJACK
DATA PORT
MODULE
TO SHORTING
PLUG LOCATION
(on 
keyset control
b-4
Page 3-88 

INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCEINSTALLATION
Issue 1, November 1994
7.41To connect a 
Loud Ringing Adapter (LRA):
The optional Data Port Module can be used to comtect
external signaling equipment such as loud bells, horns,
flashing lights, etc. to a 
keyset. This application isusefnl
in areas where the normal ring tone of the keyset cannot
be heard, such as warehouses and loading docks. The
signaling device follows the normal ringing patterns of
the 
keyset.
NOTE: Since handsfree...

INSTALLATIONIssue 1, November 1994INTER-TELPRACTICES
IMXIGMX 256 INSTALLATION & MAINTENANCE
D.IMX 256 DIGITAL DSS/BLF UNITINS-‘I’ION
7.44Up to 50 digital keysets can be equipped with up
to four digital Direct Station Selection/Busy Lamp Field
(DSWBLF) Units each. Bach single DSS/BLF Unit has
60 keys for directly accessing up to 60 numbers. The
numbers can be station extension numbers, hunt group
pilot numbers, or other system features.
NOTE: The system can have as many as 50 
keyset cir-
cuits equipped...

INTER-TELPRAcTKJ3sIMX/GMX 256 INS1’ALLATION & MAINTENANCEINsTALLATlONIssue 1, November 1994
FIGURE 3-51.
BACK OF DIGITAL DSS/BLF UNIT
m-232-cM-232-C
CONNECTOR
CONNECTORTO 
KEYSET PC DATATO 2ND DSS/BLFPORT MODULE
UNIT, IF INSTALLED
I
POWER CONNECTORTO AC 
TFIANSFORMER/
INSIDE OF BASEPLATEBACK OF DIGITAL 
DSS/BLF UNIT
.:::::.:::::.
El::::::::s>;f:::::$:.:2..:::::s;:::;:.::::::fr..:$g$
8
Qi:)Z.g$$:.:z.p
l-1
Jt+
:::::::. . . . . . . . . . .
J’ AEl.$$$g
.,.A. . . . . . . . . .. . . . . . . . . . . .. .. . . ....

INSTALLATION
Issue 1, November 1994INTER-TELPRACTICESIMJUGMX 256 INS~TION & MAINTENANCE
E.
IMX 256 ANALOG DSS/BLF UNIT
INSTALIATION
m 7.49 Up to 50 lMX Direct Station Selection/Busy
Lamp Field 
@SS/BLF) Units can be installed on the
IMX 256 System. A Keyset Card (KSC or KSGD) can
support up to four analog units. Each 
DSS/BLF Unit has
60 keys for directly-accessing up to 60 numbers. TheI
munbtxs can be station extension numbers, hunt group
pilot numbers, or other system features.
NOTE: The system can...

lNTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCEINSTALLATIONIssue 1, November 1994F.
GMX-2!% ANALOG DSS/BLF UNIT
INSTALLATION
u 7.52Up to 50 single or tandem Direct Station Selec-
tion/Busy Lamp Field 
(DSVBLF) Units can be installed
on the system. A 
Keyset Card can support up to four
units. Each single 
DSS/BLF Unit has 60 keys for direct-
ly accessing up to 60 numbers. The numbers can be ei-ther station extension numbers or hunt group pilot
numbers. The numbers can be station extension num-...

INSTALLATIONIssue 1, November 1994INTER-TELPRAcTICE!3IMX/GMX 256 DWMLLATION & MAINTENANCE
FIGURE 3-52.INTER-TELJDVK DSS/BLF UNIT CONTROL BOARD
Page 3-94 

INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCEINSTALLATIONIssue 1. November 1994
H.SINGLE-LINE SET AND PLAYBACK
DEVICE 
lNSTALLATIONSingle-Line Sets
7.57Single-line sets can be connected to either Sing-
le-Line Cards 
(SLCs) or Inward Dialing Cards @DC’s).
If connected to SLCs, single-line sets must be equippedwith AC ringers. If connected to 
IDCs, off-premises
single-line sets must be equipped with AC ringers, while
on-premises single-lines sets may be equipped with ei-
ther AC or DC ringers....

INSTALLATION
Issue 1, November 1994INTER-TELPRACTICESIMI4GM.X 256 INS~TION & MAINTENANCE
(4)Plug one end of the line cord intd the modular(5)To wall mount an ESLS or SLI, refer to the in-jack assembly and plug the other end into the
structions given for wall mounting keysets on’ 
.-)
jack on the single-line set or playback device..A
page 3-77.
FIGURE 3-53.SLI CONTROL BOARD
Page 3-96