Inter-Tel Glx Installation And Field Maintenance Manual

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE 
Issue 1, 
November 1985 
E. SPEED DIALING 
5.11 Speed dialing allows keyset users to store frequently 
dialed numbers. There are two types of speed dialing available 
on the GLX System: station speed dialing and system speed dial- 
ing. 
5.12 Up to nine station speed-dial numbers can be stored by key- 
set users for their personal use. Up to 30 system speed-dial 
numbers can be stored from the attendants keyset for use by any 
keyset user....

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE 
Issue 1, November 1985 
5.16 To dial station speed-dial numbers: 
(1) Lift the handset and press an unlit line key. 
(2) Press the SPDL key. The SPDL key lights. 
(3) Dial the one-digit memory location code (l-9). The num- 
ber is dialed and the SPDL key is unlit. 
If you dial an 
invalid location code, you hear a busy signal and the 
C.O. line is placed on hold. 
5.17 To erase a station speed-dial number without entering a new 
number: 
(1)...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE Issue 1, 
November 1985 
5.20 To dial-system speed-dial numbers: 
(1) Lift the handset and press an unlit line key. 
(2) Press the SPDL key. The SPDL key lights. 
(3) Dial the three-digit memory location code (001-030). 
The number is dialed and the SPDL key is unlit. If you 
dial an invalid location code, you hear a busy signal 
and the C.O. line is placed on hold. 
5.21 To erase a system speed-dial number without entering a new 
number:...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE Issue 1, November 1985 
(6) EITHER, press the SPDL key (the SPDL key lights) and 
dial the memory location code of the long distance 
number (1-9 or 001-030). The number is dialed and the 
SPDL key is unlit. 
OR, manually dial the long distance number if it is not 
stored in speed-dial memory. 
F. LAST NUMBER REDIAL 
5.24 This feature stores the last phone number dialed (up to 32 
digits) in the battery-protected data base memory. When a keyset...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION c MAINTENANCE Issue 1, 
November 1985 
: 
5.29 To redial the last number dialed after disconnecting (Ex- 
ecutive Kevset): 
(1) Lift the handset and press an unlit line key. 
(2) Press the REDL key. The REDL key lights while the num- 
ber is dialed. 
G. PLACING CALLS ON HOLD 
5.30 There are two ways to place outside calls on hold: 
system 
hold and individual hold. While on hold, callers hear music, if 
available. The automatic recall timers limit the amount...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE Issue 1, November 1985 
H. 
AUTOMATIC RECALL TIMERS 
5.37 Three timers ensure that calls placed on system hold or in- 
dividual hold are not forgotten. They are the hold recall timer, 
the attendant recall timer, and the attendants abandoned call 
timer (refer to page 4-6 for programming information). 
5.38 
If an outside call remains on system or individual hold 
until the hold recall timer expires, it recalls the keyset. If a 
hold recall is...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION 6 MAINTENANCE Issue 1, 
November 1985 
5.43 To transfer an outside call to another keyset: 
(1) While on an outside call, press the DSS/BLF key of the 
party that is to receive the transfer. The outside call 
is placed on system hold. 
(2) If the receiving keyset is idle, announce the call and 
hang up. The receiving party sees a double-flashing 
line key and hears a long ring tone every 6 seconds. 
If the receiving keyset is busy, hang up. The receiving...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE Issue 1, 
November 1985 
Outside Call Wagting 
6.05 The busy keyset user hears a short ring tone every 6 sec- 
onds. If the waiting call is a direct ring-in call, the keyset 
user sees a slow-flashing line key. If it is a transferred 
outside call, the user sees a double-flashing line key. 
6.06 To answer an outside call waiting while on an intercom 
call: Press the flashing line key. You are disconnected from 
theintercom call and connected to...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION & MAINTENANCE Issue 1, 
November 1985 
7.03 To place a conference call: 
(1) While on an intercom or outside call, press the CNF key. 
The party is placed on individual hold. If the call is 
to an outside party, the associated line key double 
flashes. 
(2) Place intercom or outside calls to the other parties. 
For each call, press the CNF key to place the party on 
hold. If 
the call is to an outside 
party, the 
associated line key double flashes. 
NOTE:...

INTER-TEL PRACTICES FEATURES 
GLX INSTALLATION h MAINTENANCE Issue 1, 
November 1985 
8. PAGING 
’ 
8.01 Keyset users can make pages to one internal zone or one 
external zone. Internal zone pages are heard through the speaker 
of every idle keyset. External pages are heard through the 
customer-provided external paging network. If desired, individu- 
al keysets can be removed from the internal paging zone by en- 
abling keyset option 1 during keyset features programming. 
8.02 To make a page: 
:: ,;...