InFocus Projector IN5316HDa User Manual

— 54 — 
Timing Mode Table 
The projector can display multiple resolutions. The following table outlines the resolutions that can be 
displayed by the projector. 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
COMPOSITE / 
S-VIDEO 
VGA 1/2 
/RGBHV 
(ANALOG) 
HDMI 
(DIGITAL) 
DP 
(DIGITAL) 
NTSC — 15.734 60.0 O — — — 
PAL/SECAM — 15.625 50.0 O — — — 
VESA 
720 x 400 37.9 85.0 — O O O 
640 x 480 31.5 60.0 — O O O 
640 x 480 37.9 72.8 — O O O 
640 x 480 37.5 75.0 — O O O 
640 x 480 43.3 85.0 — O O O 
800 x...

  – 55 – 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
COMPOSITE / 
S-VIDEO 
VGA 1/2 
/RGBHV 
(ANALOG) 
HDMI 
(DIGITAL) 
DP 
(DIGITAL) 
HDTV 
720p 37.5 50.0 — O O O 
720p 45.0 60.0 — O O O 
1080i 33.8 60.0 — O O O 
1080i 28.1 50.0 — O O O 
1080p 27 24.0 — O O O 
1080p 28.13 25.0 — O O O 
1080p 33.75 30.0 — O O O 
1080p 67.5 60.0 — O O O 
1080p 56.3 50.0 — O O O 
O: Frequency supported 
—: Frequency not supported 
(*) VGA supports EDTV/SDTV/HDTV component with an adapter. 
  

— 56 — 
Projector Dimensions 
 
   

  – 57 – 
REGULATORY COMPLIANCE 
FCC Warning 
This equipment has been tested and found to comply with the limits for a Class B digital device 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interference...

— 58 — 
APPENDIX I 
Serial Communication 
The following table describes the serial communication configuration that should be used when 
interfacing to CLI via the serial port. 
Windows HyperTerminal or ProComm are two tools that can be used to send CLI commands across 
the serial port. 
Setting Value 
Bits per second 19200 
Data bits 8 
Parity None 
Stop bits 1 
Flow control None 
Emulation VT100 
 
No Function Command RW Min Max Default Step Parameter 
1 AC Power On 
(Auto power on) 
APO RW 0 1 0 1...

  – 59 – 
No Function Command RW Min Max Default Step Parameter 
13 Current Source SRC RW 0 20 0 1 
0 = Computer1 
1 = Computer 2 
3 = RGBHV 
4 = HDMI1 
7 = DisplayPort1 
9 = Component1 
11 = Composite 
12 = S-Video 
20 = DVI  
14 Digital Zoom DZM RW -10 10 0 1 Digital Zoom  
15 Error Condition ERR R 0 9 0 1 
0:No error 
1:Lamp not lit after 5 
Attempts 
3:Lamp went out 
unexpectedly 
4:Fan failure 
5:Over-temperature 
8:DMD error 
9:Color wheel 
16 Factory Reset RST W n/a 1 1 1 1:reset 
17 Freeze Screen...

— 60 — 
No Function Command RW Min Max Default Step Parameter 
27 
Total Projection  
Hours 
(lamp1+lamp2+…) 
LMT R 0 9999 0 1 
Displays the total number of 
hours the projector has been 
in operation (all lamps). 
28 Lamp Life LIF R n/a 1500 1500 n/a Lamp life 1500 
29 
Lamp Power Select 
 
High power (Boost) /  
Low power (Normal) / 
Eco power (Eco) 
IPM RW 0 2 1 1 
This Read/Write command 
sets the lamp mode 
0 = Eco 
1 = Normal 
2 = Boost 
33 Language LAN RW 0 26 0 1 
0:English 
1:French 
2:German...

  – 61 – 
No Function Command RW Min Max Default Step Parameter 
41 Presets PST RW 0 8 source 
Specific 1 
Display mode 
0:Presentation 
1:Bright 
2:Game 
3:Movie 
4:TV 
5:sRGB 
6:Blackboard 
7:User1 
8:User2 
42 Projector Firmware 
Ver. FVS R string    LX737-692IF-DPEXX 
43 Projector Info menu PRI W  1  1 1:Display 
Status Menu 
44 Projector Model MDL R string    XGA: IN5312a 
1080P: IN5316HDa 
45 Projector Resolution NRS R string    XGA  
46 Search Screen DSU RW 0 4 0 1 
0:Blue 
1:Black 
2:White 
3:Red...