InFocus Projector IN5316HDa User Manual

— 24 — 
MAIN 
MENU 
 
SUB MENU   
 
SETTINGS 
Settings 2   Auto Source       Off, On 
  No Signal 
Power Off       0~180 
  Auto Power 
On       Off, On 
    Lamp Mode     
 ECO , Normal, Boost 
  Reset All       
  Status  Active Source     
     Video Information    
     Lamp Hours  
(ECO, Normal, Boost)   
     Software Version    
     Serial Number     
    Advanced 1    Menu Position 
  Center, Down, Up, Left, Right 
       Translucent Menu    0%, 25%, 50%, 75%, 100% 
       Low Power Mode   
Off,...

  – 25 – 
Image Menu  
 Attention !   
When image options are changed, the Display Mode changes to User. 
Press the MENU button to open the OSD menu. Press ◄► to move to the Image Menu. Press ▲▼ 
to move up and down in the Image menu. Press ◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode Press ◄► to enter and set the Display Mode.  
Brightness Press ◄► to enter and adjust the display brightness. 
Contrast Press ◄► to enter and adjust the display contrast. 
Computer Press...

— 26 — 
Computer Menu 
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ 
to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the 
Computer menu. 
 
ITEM DESCRIPTION 
Horizontal Position Press ◄► to enter and adjust the display position to left or right.  
Vertical Position Press ◄► to enter and adjust the display position to up or down.  
Frequency Press ◄► to enter and adjust the A/D sampling clock. 
Tracking Press ◄► to enter...

  – 27 – 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press ◄► to enter and adjust the Brilliant Color value. 
Sharpness Press ◄► to enter and adjust the display sharpness. 
Gamm~ Press ◄► to enter and adjust the gamma correction of the display. 
Color Temperature Press ◄► to enter and adjust the...

— 28 — 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in 
the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press ◄► to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press ◄► to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press ◄► to...

  – 29 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
the ▲▼ to move up and down in the Settings 1 menu. Press ◄► to enter and change values for 
settings. 
 
ITEM DESCRIPTION 
Source Press  (Enter) / ► to enter the Source menu. oeference input Source select 
(Io / Keypad). 
Projection Press ◄► to enter and choose from four projection methods: Normal, Ceiling, Rear, 
and Rear + Ceiling. 
Aspect Ratio Press ◄► to enter and adjust the video...

— 30 — 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press ◄► to enter and adjust the audio volume.  
Mute Press ◄► to enter and turn on or off the speaker. 
  

  – 31 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press ◄► to enter and select a different OSD language. 
Security Lock  Press ◄► to enter and enable or disable the security lock function. 
Blank Screen Press ◄► to enter and select a different...

— 32 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press ◄► to enter and select a different 3D mode. 
3D Sync Invert Press ◄► to enter and enable or disable 3D Sync Invert. 
3D Format Press ◄► to enter and enable or disable different 3D Formats. 
 
Note: 
1. By default, the 3D OSD menu options will be grayed out until a 3D source is detected. When a 3D 
source is detected, the menu options will become available. 
2. Use 3D glasses to view a 3D image. 
3. You need 3D content from a 3D DVD or 3D media file. 
4....

  – 33 – 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 2 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press ◄► to enter and select an internal test pattern. 
H Image Shift Press ◄► to enter and select H Image Shift. 
V Image Shift Press ◄► to enter and select V Image Shift.