Home > IBM > Notebook > IBM Thinkpad Transnote Manual

IBM Thinkpad Transnote Manual

    Download as PDF Print this page Share this page

    Have a look at the manual IBM Thinkpad Transnote Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 60 IBM manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Removing and replacing a FRU
    ThinkPad TransNote57 
    						
    							1020 DIMM
    (continued) vBattery pack(1010)
    Removing and replacing a FRU
    58ThinkPad TransNote 
    						
    							Note:Loosen the screw3, but do not remove it.
    (continued)
    Removing and replacing a FRU
    ThinkPad TransNote59 
    						
    							Removing and replacing a FRU
    60ThinkPad TransNote 
    						
    							DIMM installation notice:
    With the notched end of the DIMM toward the socket,
    insert the DIMM at an angle of about 25 degrees, into the
    socket1; then press it firmly. Pivot the DIMM until it
    snaps into place2. Make sure that the card is firmly
    fixed in the slot and does not move easily.
    DIMM cover installation notice:
    Attach the latch of the cover firmly by pressing the part
    shown in the following figure, and then tighten the screw.
    Removing and replacing a FRU
    ThinkPad TransNote61 
    						
    							1030 Mini PCI adapter
    Note:Loosen the screw1, but do not remove it.
    (continued) vBattery pack(1010)
    Removing and replacing a FRU
    62ThinkPad TransNote 
    						
    							Removing and replacing a FRU
    ThinkPad TransNote63 
    						
    							Note:The illustration shows the combo card. Connector
    (A)is for the LAN feature and(B)is for the modem
    feature. This slot also supports a Mini PCI modem
    card or a Mini PCI network card. Step7depends
    on the card type. Disconnect either(A),(B)or both.
    Removing and replacing a FRU
    64ThinkPad TransNote 
    						
    							When installing:
    Align the contact edge of the combo card or Mini-PCI Card
    with the corresponding socket contact of the computer at
    an angle of 25 degrees. Insert the card into the socket1.
    Pivot the card until it snaps into place2. Make sure that
    the card is firmly fixed in the slot and does not move
    easily.
    (continued)
    Removing and replacing a FRU
    ThinkPad TransNote65 
    						
    							Note:Be sure that connectors and cables are properly
    housed in the slot as shown in the following figure.
    Otherwise, the card cannot be seated firmly in it.
    After installing the Mini-PCI Card, attach the black sheet to
    the card. If the sheet does not stick to the slot on the video
    card, just leave it and install the Mini-PCI slot cover not to
    pinch the cable or the black sheet.
    Removing and replacing a FRU
    66ThinkPad TransNote 
    						
    All IBM manuals Comments (0)

    Related Manuals for IBM Thinkpad Transnote Manual