IBM Thinkpad T30 Manual

5
5
Step Screw (quantity) Torque

5M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
ThinkPad T3097 

6
6
Removing and replacing a FRU
98ThinkPad T30 (MT 2366, 2367) 

When installing:Make sure that the antenna cables are
routed along the cable holder as shown
in this figure, and then attach the LCD
assembly to the base cover by securing
the screws.
Removing and replacing a FRU
ThinkPad T3099 

1150 PC Card slot assembly
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1090 Keyboard”on page 77
v“1120 Keyboard bezel”on page 87
2
1
1
Step Screw (quantity) Torque

1M2×16 mm, nylon-coated (4) 0.245 Nm
(2.5 kgfcm)
When installing:Make sure that the connector of the PC
card slot is firmly attached, and then
secure the screws.
Removing and replacing...

1160 Speaker assembly
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1090 Keyboard”on page 77
v“1120 Keyboard bezel”on page 87
1
2
Step Screw (quantity) Torque

1M2.5×16 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm) Removing and replacing a FRU
ThinkPad T30101 

1170 Hard-disk drive slot
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1090 Keyboard”on page 77
v“1120 Keyboard bezel”on page 87
v“1160 Speaker assembly”on page 101
21
1
Step Screw (quantity) Torque

1M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm) Removing and replacing a FRU
102ThinkPad T30 (MT 2366, 2367) 

1180 Ultrabay Plus guide rail and
microphone cable
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1070 Mini PCI adapter”on page 71
v“1080 Communication daughter card (CDC)”on page 74
v“1090 Keyboard”on page 77
v“1100 Fan assembly”on page 81
v“111 0 C P U”on page 85
v“1120 Keyboard bezel”on page 87
v“1130 Hinge cover”on page 92
v“1140 LCD assembly”on...

The microphone cable is attached to the Ultrabay Plus
guide rail. Remove the Ultrabay Plus guide rail first, and
then detach the microphone cable.
2
Step Screw (quantity) Torque

2M2.5×4.8 mm, nylon-coated (1) 0.392 Nm
(4 kgfcm)
Detach the connector
3, and then lift the left side of the
Ultrabay Plus guide rail slightly (
4). Then remove the
Ultrabay Plus guide rail in the direction of arrow
5.
5
4
3
(continued)
Removing and replacing a FRU
104ThinkPad T30 (MT 2366, 2367) 

Cable routing:When installing, route the microphone
cable along the cable guide, and attach
the connector of the microphone cable.
Removing and replacing a FRU
ThinkPad T30105 

1190 System board
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1070 Mini PCI adapter”on page 71
v“1080 Communication daughter card (CDC)”on page 74
v“1090 Keyboard”on page 77
v“1100 Fan assembly”on page 81
v“111 0 C P U”on page 85
v“1120 Keyboard bezel”on page 87
v“1130 Hinge cover”on page 92
v“1140 LCD assembly”on page 94
v“1150 PC Card slot...