Home > IBM > Notebook > IBM Thinkpad T30 Manual

IBM Thinkpad T30 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual IBM Thinkpad T30 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 60 IBM manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							5
    5
    Step Screw (quantity) Torque
    5M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    (continued)
    Removing and replacing a FRU
    ThinkPad T3097 
    						
    							6
    6
    Removing and replacing a FRU
    98ThinkPad T30 (MT 2366, 2367) 
    						
    							When installing:Make sure that the antenna cables are
    routed along the cable holder as shown
    in this figure, and then attach the LCD
    assembly to the base cover by securing
    the screws.
    Removing and replacing a FRU
    ThinkPad T3099 
    						
    							1150 PC Card slot assembly
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 61
    v“1020 Ultrabay Plus device”on page 62
    v“1030 Hard-disk drive”on page 63
    v“1050 Backup battery”on page 67
    v“1060 DIMM”on page 69
    v“1090 Keyboard”on page 77
    v“1120 Keyboard bezel”on page 87
    2
    1
    1
    Step Screw (quantity) Torque
    1M2×16 mm, nylon-coated (4) 0.245 Nm
    (2.5 kgfcm)
    When installing:Make sure that the connector of the PC
    card slot is firmly attached, and then
    secure the screws.
    Removing and replacing a FRU
    100ThinkPad T30 (MT 2366, 2367) 
    						
    							1160 Speaker assembly
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 61
    v“1020 Ultrabay Plus device”on page 62
    v“1030 Hard-disk drive”on page 63
    v“1050 Backup battery”on page 67
    v“1090 Keyboard”on page 77
    v“1120 Keyboard bezel”on page 87
    1
    2
    Step Screw (quantity) Torque
    1M2.5×16 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm) Removing and replacing a FRU
    ThinkPad T30101 
    						
    							1170 Hard-disk drive slot
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 61
    v“1020 Ultrabay Plus device”on page 62
    v“1030 Hard-disk drive”on page 63
    v“1050 Backup battery”on page 67
    v“1090 Keyboard”on page 77
    v“1120 Keyboard bezel”on page 87
    v“1160 Speaker assembly”on page 101
    21
    1
    Step Screw (quantity) Torque
    1M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm) Removing and replacing a FRU
    102ThinkPad T30 (MT 2366, 2367) 
    						
    							1180 Ultrabay Plus guide rail and
    microphone cable
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 61
    v“1020 Ultrabay Plus device”on page 62
    v“1030 Hard-disk drive”on page 63
    v“1050 Backup battery”on page 67
    v“1060 DIMM”on page 69
    v“1070 Mini PCI adapter”on page 71
    v“1080 Communication daughter card (CDC)”on page 74
    v“1090 Keyboard”on page 77
    v“1100 Fan assembly”on page 81
    v“111 0 C P U”on page 85
    v“1120 Keyboard bezel”on page 87
    v“1130 Hinge cover”on page 92
    v“1140 LCD assembly”on page 94
    1
    1
    Step Screw (quantity) Torque
    1M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    (continued)
    Removing and replacing a FRU
    ThinkPad T30103 
    						
    							The microphone cable is attached to the Ultrabay Plus
    guide rail. Remove the Ultrabay Plus guide rail first, and
    then detach the microphone cable.
    2
    Step Screw (quantity) Torque
    2M2.5×4.8 mm, nylon-coated (1) 0.392 Nm
    (4 kgfcm)
    Detach the connector3, and then lift the left side of the
    Ultrabay Plus guide rail slightly (4). Then remove the
    Ultrabay Plus guide rail in the direction of arrow5.
    5
    4
    3
    (continued)
    Removing and replacing a FRU
    104ThinkPad T30 (MT 2366, 2367) 
    						
    							Cable routing:When installing, route the microphone
    cable along the cable guide, and attach
    the connector of the microphone cable.
    Removing and replacing a FRU
    ThinkPad T30105 
    						
    							1190 System board
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 61
    v“1020 Ultrabay Plus device”on page 62
    v“1030 Hard-disk drive”on page 63
    v“1050 Backup battery”on page 67
    v“1060 DIMM”on page 69
    v“1070 Mini PCI adapter”on page 71
    v“1080 Communication daughter card (CDC)”on page 74
    v“1090 Keyboard”on page 77
    v“1100 Fan assembly”on page 81
    v“111 0 C P U”on page 85
    v“1120 Keyboard bezel”on page 87
    v“1130 Hinge cover”on page 92
    v“1140 LCD assembly”on page 94
    v“1150 PC Card slot assembly”on page 100
    v“1160 Speaker assembly”on page 101
    v“1170 Hard-disk drive slot”on page 102
    v“1180 Ultrabay Plus guide rail and microphone cable”on
    page 103
    There are two types of system board FRU for the
    ThinkPad T30 series, as follows:
    vSystem board with IBM security chip (bottom view)
    Note:The security chipais embedded on the bottom
    side of the system board.
    a
    Removing and replacing a FRU
    106ThinkPad T30 (MT 2366, 2367) 
    						
    All IBM manuals Comments (0)

    Related Manuals for IBM Thinkpad T30 Manual