IBM Thinkpad T30 Manual

							1120 Keyboard bezel
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1090 Keyboard”on page 77
Remove the keyboard CRU insulator before removing the
keyboard bezel.
(continued)
Removing and replacing a FRU
ThinkPad T3087 
						

							1
1
2
22
2
2
Step Screw (quantity) Torque

1M2.5×16 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm)

2M2.5×4.8 mm, nylon-coated (5) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
88ThinkPad T30 (MT 2366, 2367) 
						

							If the ThinkPad computer you are servicing has the touch
pad, detach the connector
abefore removing the screws.
3
45
5
3
a
Step Screw (quantity) Torque

3M2.5×16 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm)

4M2×16 mm, nylon-coated (2) 0.245 Nm
(2.5 kgfcm)

5M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
(4 kgfcm)
When installing:If the ThinkPad computer you are
servicing has the touch pad, make sure
that the connector
ais firmly attached.
(continued)
Removing and replacing a FRU
ThinkPad T3089 
						

							Pull the corner of the base cover indicated by arrow
6to
unlatch the claw
a.
6
a
In step
7, make sure that all of the claws (
b)onthe
front side of the computer are detached, and then remove
the keyboard bezel in the direction of arrow
8.
8
7
bbbbbb
Removing and replacing a FRU
90ThinkPad T30 (MT 2366, 2367) 
						

							When installing the keyboard bezel, do the following:
1. Attach the keyboard bezel to the computer, aligning the
three dents of the bezel with the hinges and the
projection.
2. Make sure that all of the claws on the front side of the
computer (
bin removal step
6) are firmly attached.
3. Make sure that the claw on the bottom side of the
bezel is firmly attached.
4. Attach the connector firmly if the ThinkPad computer
features the touch pad, and then secure the screws.
Removing and replacing a FRU
ThinkPad T3091 
						

							1130 Hinge cover
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1090 Keyboard”on page 77
v“1120 Keyboard bezel”on page 87
1
Step Screw (quantity) Torque

1M2.5×15 mm, nylon-coated (1) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
92ThinkPad T30 (MT 2366, 2367) 
						

							2
When installing:Attach the hinge cover, aligning the two
projections
aon the rear side with the
two small square holes of the base
cover.
aa
Removing and replacing a FRU
ThinkPad T3093 
						

							1140 LCD assembly
For access, remove these FRUs, in order:
v“1010 Battery pack”on page 61
v“1020 Ultrabay Plus device”on page 62
v“1030 Hard-disk drive”on page 63
v“1050 Backup battery”on page 67
v“1060 DIMM”on page 69
v“1070 Mini PCI adapter”on page 71
v“1080 Communication daughter card (CDC)”on page 74
v“1090 Keyboard”on page 77
v“1120 Keyboard bezel”on page 87
v“1130 Hinge cover”on page 92
1
1a
a
1
1
Some models may not have screw caps
a.
Step Screw (quantity) Torque

1M2.5×4.8 mm, nylon-coated (4) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
94ThinkPad T30 (MT 2366, 2367) 
						

							2
When installing:Make sure that the connector
2is
firmly attached.
(continued)
Removing and replacing a FRU
ThinkPad T3095 
						

							4
4
4
3
When installing:Make sure that the antenna cables are
firmly routed as shown in the figure.
(continued)
Removing and replacing a FRU
96ThinkPad T30 (MT 2366, 2367)