IBM Thinkpad T30 Manual

1050 Backup battery
DANGER
For access, remove this FRU:
v“1010 Battery pack”on page 61
1
3
2
Step Screw (quantity) Torque

1M2.5×4.8 mm, nylon-coated (1) 0.392 Nm
(4 kgfcm)
When installing:Make sure that the battery connector is
firmly attached, and then secure the
screw. The use only the battery in the parts listing for your
computer. Use of an incorrect battery can result in
ignition or explosion of the battery.
Removing and replacing a FRU
ThinkPad T3067 

Cable routing:When attaching the backup battery to the
holder, route the battery cable as in the
following figure.
Removing and replacing a FRU
68ThinkPad T30 (MT 2366, 2367) 

1060 DIMM
For access, remove this FRU:
v“1010 Battery pack”on page 61
Note:Loosen the screw
1, but do not remove it.
2
1
(continued)
Removing and replacing a FRU
ThinkPad T3069 

3
3
4
When installing:With the notched end of the DIMM
toward the socket, insert the DIMM into
the socket, and then press it firmly. Pivot
the DIMM until it snaps into place. Make
sure that the card is firmly fixed in the
slot and does not move easily.
Removing and replacing a FRU
70ThinkPad T30 (MT 2366, 2367) 

1070 Mini PCI adapter
For access, remove this FRU:
v“1010 Battery pack”on page 61
Note:Loosen the screws
1, but do not remove them.
2
1
The following illustrations for step
3to step
8show the
combination of the Mini PCI combo card and Bluetooth
daughter card (BDC).
Note:Some models do not have Mini PCI guide
3. For
those models, skip step
3of removal procedure.
3
4
(continued)
Removing and replacing a FRU
ThinkPad T3071 

Antenna cables
5aand
5bare for the wireless LAN
feature, and
7is for the modem feature. This slot also
supports a Mini PCI wireless LAN card. In case of you are
servicing the ThinkPad computer with the Mini PCI
wireless LAN card, skip the step
7because the card
does not have the connector on the Mini PCI wireless LAN
card.
Note:When unplugging the antenna jack, do not pull the
cable; it might snap. Unplug the jack by pulling a
tab with your fingers.
MAIN
AUX
5a
5b
5a5b
When installing:Plug the gray...

Some MiniPCI Cards do not have the modem function. For
those cards, skip step
7because there is no modem
connector on it.
7
8
6
6
When installing:With the notched end of the card toward
the socket, insert the card into the
socket, and then press it firmly. Pivot the
card until it snaps into place. Make sure
that the card is firmly fixed in the slot
and does not move easily.
Removing and replacing a FRU
ThinkPad T3073 

1080 Communication daughter card
(CDC)
For access, remove this FRU:
v“1010 Battery pack”on page 61
Note:Loosen the screws
1, but do not remove them.
2
1
Modem daughter card (MDC)
33
Step Screw (quantity) Torque

3CDC screw (2) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
74ThinkPad T30 (MT 2366, 2367) 

4
56
When installing:Make sure that connectors
4and
6
are firmly attached.
Bluetooth daughter card (BDC)Following illustrations show the combination of the Mini
PCI combo card and the BDC.
33
Step Screw (quantity) Torque

3CDC screw (2) 0.392 Nm
(4 kgfcm)
(continued)
Removing and replacing a FRU
ThinkPad T3075 

5
46
When installing:Make sure that connector
5is firmly
attached.
Note:When unplugging the Bluetooth antenna jack, do
not pull the cable; it might snap. Unplug the jack by
pulling a tab with your fingers.
7
When installing:Make sure that connector
7is firmly
attached.
Removing and replacing a FRU
76ThinkPad T30 (MT 2366, 2367)