Husqvarna Fs 4800 D Manual

31
NOTES:
NOTAS:
REMARQUE : 

32

DECALS & LOCATIONS
ETIQUETAS Y SU UBICACIÓN
AUTOCOLLANTS ET LEURS EMPLACEMENTS
TRANSMISSION BYPASS VALVE
RIGHT FRAME BASE NEAR VALVE
542 19 06-28 
OPERATING INSTRUCTIONS
INSTRUMENT PANEL
542 20 64-77
DEPTH INDICATOR
542 20 61-95 (Inch - USA)
542 19 06-18 (CM for CE)
OPERATING INSTRUCTIONS
TOP OF COWL
542 20 61-29 Standard
542 19 06-19 CE version
WARNING: GUARDS IN PLACE 
1) Top of Frame at Rear of Machine.
2) Both Sides of Engine by Lift Bail Mount
3) Top of Frame at Front of Machine - Below Right...

33

DECALS & LOCATIONS
ETIQUETAS Y SU UBICACIÓN
AUTOCOLLANTS ET LEURS EMPLACEMENTS
DECAL, HUSQVARNA  FS4800D
SIDES OF COWL
542 19 07-03 (x2)
DECAL, 3” HSQ CROWN
FRONT OF HOOD
542 19 07-35
DECAL, HUSQVARNA, 9.5” LG
REAR OF COWL
542 19 07-33
MANUAL AXLE  ADJUSTMENT
REAR OF COWL
542 19 94-35
* NOTE: Part No’s. in the manual that have an ASTRISK (*) 
suffix may not be active 9-digit numbers. The ‘542’ prefix has 
been added temporaily to current 6-digit part numbers and ‘0’ 
to 8-digit part numbers.
GEARBOX...

34

DECALS & LOCATIONS
ETIQUETAS Y SU UBICACIÓN
AUTOCOLLANTS ET LEURS EMPLACEMENTS
GEARBOX RANGE / BLADE RPM (14-20)
TOP OF INSTRUMENT PANEL, 
3 Speed Gearbox Models With
4.5” (114mm) Diameter Flanges
542 19 05-96* 
BLADE GUARD WARNING, 
TOP  OF BLADE GUARD
542 16 72-98*
GEARBOX RANGE / BLADE RPM (18-30)
TOP OF INSTRUMENT PANEL, 
3 Speed Gearbox Models With
5.0” (114mm) Diameter Flanges
542 19 05-98* 
GEARBOX RANGE / BLADE RPM (20-36)
TOP OF INSTRUMENT PANEL, 
3 Speed Gearbox Models With
6.0” (114mm)...

35

* NOTE: Part No’s. in the manual that have an  
ASTRISK (*) suffix may not be active 9-digit numbers. 
The ‘542’ prefix has been added temporaily to current 
6-digit part numbers and ‘0’ to 8-digit part numbers.
DECALS & LOCATIONS
ETIQUETAS Y SU UBICACIÓN
AUTOCOLLANTS ET LEURS EMPLACEMENTS
DIFFERENTIAL  SWITCH
TOP OF INSTRUMENT PANEL (Rear Pivot Only)
542 19 06-07
ELECTRIC TRACKING
TOP OF INSTRUMENT PANEL, 
Front Pivot Models Only
542 19 94-33 
SHIFT LEVER POSITION-6.0” FLANGE
TOP OF ENGINE HOOD -...

36

FS 4800 D DIESEL SPECIFICATIONS
Standard & CE Models
FS 4800 DIESEL MODELFS 4800 D 14FS 4800 D 18FS 4800 D 26FS 4800 D 30FS 4800 D 36
Saw (Standard)----------
Saw with Electric Track----------
Saw with Electric Track & Clutch----------
STANDARD FEATURES:
Blade Guard Capacity - in. (mm)14 (355)18 (457)26 (660)30 (762)36 (914)
Max. Depth of Cut - in. (mm)4.50 (114)6.50 (165)10.50 (267)12.00 (305)15 (381)
Blade Shaft RPM (Single speed gearbox model only)2,9002,4001,8001,6001,350
Approximate Blade Shaft...

37

FS 4800 D DIESEL SPECIFICATIONS
Standard & CE Models 

38

ESPECIFICACIONES DE DIESEL FS 4800 D
Modelos estándar y CE
MODELO DIESEL  FS  4800 FS 4800 D 14FS 4800 D 18FS 4800 D 26FS 4800 D 30FS 4800 D 36
Sierra (estándar)----------
Sierra con seguimiento eléctrico ----------
Sierra con seguimiento eléctrico y embrague ----------
CARACTERÍSTICAS ESTÁNDAR:
Capacidad de protección  de la hoja – pulg (mm)14 (355)18 (457)26 (660)30 (762)36 (914)
Profundidad máx. de  corte – pulg (mm)4,50 (114)6,50 (165)10,50 (267)12,00 (305)15 (381)
Eje de la hoja en rpm (Modelo...

39

ESPECIFICACIONES DE DIESEL FS 4800 D
Modelos estándar y CE 

40

SPÉCIFICATIONS DU FS 4800 D DIESEL
Modèles standards et CE
FS 4800  MODÈLE  DIÉSEL  FS 4800 D 14FS 4800 D 18FS 4800 D 26FS 4800 D 30FS 4800 D 36
Scie (standard)----------
Scie avec poursuite électrique----------
Scie avec poursuite électrique  et embrayage----------
CARACTÉRISTIQUES STANDARDS :
Capacité de la protection de disque en po (mm)14 (355)18 (457)26 (660)30 (762)36 (914)
Prof. d’entaille max. en po (mm)4,50 (114)6,50 (165)10,50 (267)12,00 (305)15 (381)
Régime de l’axe de disque (modèle doté...