HP Photosmart C8183 User Manual

Chapter 9
120 Use the scan features
Scan
 

10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to  Letter  or A4, the paper type to  Plain Paper, and...

3.Touch  Preview .
An image on the display shows how your copy will print.
4. Touch  Black or Color  to accept the preview and begin copying.
Change the copy settings  for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type
•
Change copy speed or quality
•
Adjust the lightness and darkness of your copy
Set the number of copies
You...

3.Touch the appropriate paper size.
Refer to the following table to determine  which paper size setting to choose, based
on the paper loaded in the input tray.
Paper typeSuggested paper size settings
Copier, multi-purpose, or plain papers8.5x11 inch  or A4
Inkjet papers8.5x11 inch  or A4
Letterhead8.5x11 inch  or A4
Photo papers10x15 cm
4x6 inch
13x18 cm
5x7 inch
8.5x11 inch
A4
L (Japan only)
2L  (Japan only)
20x25 cm  (Germany only)
Mutsugiri  (Japan only)
HagakiHagaki (Japan only)
Transparency...

3.Touch the appropriate paper type.
Refer to the following table to determine which paper type setting to choose based
on the paper loaded in the input tray.
Paper typeControl panel setting
Copier paper or letterheadPlain Paper
HP Bright White PaperPlain Paper
HP Premium Plus Photo Paper, GlossyPremium Photo
HP Premium Plus Photo Paper, MattePremium Photo
HP Premium Plus 10 x 15 cm (4 x 6 inch)
Photo PaperPremium Photo
HP Photo PaperPhoto Paper
HP Everyday Photo PaperEveryday Photo
HP Everyday Photo...

•Normal  delivers high quality and is the recommended setting for most of your
copying.  Normal copies faster than  Best and is the default setting.
• Fast  copies faster than the  Normal setting. The text is comparable to the quality of
the  Normal  setting, but the graphics might be lower quality. The  Fast setting uses
less ink and extends the life  of your ink cartridges.
To change the copy quality from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original...

3.Touch  Set As New Defaults .
NOTE:If the menu option you want is not visible on the screen, touch  or
 to scroll through all the menu options.
4.Touch  Yes, change defaults .
NOTE:The settings you specify here are only saved on the HP All-in-One. They do
not adjust the settings in the software. You can save your most frequently used
settings by using the software that you installed with the HP All-in-One.
Perform special copy jobs
In addition to supporting standard copy jobs, the HP All-in-One can...

3.Touch  Copy.
The  Copy Menu  appears.
4. Touch  Black or Color .
The HP All-in-One makes a 10 x 15 cm (4  x 6 inch) borderless copy of your original
photo.
NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab
from the copy of your photo once the ink has completely dried.
TIP: If the output is not borderless set the paper type to  Premium Photo, and
then try making the copy again.
Related topics
•“
Load up to 10 x 15 cm (4 x 6 inch) photo paper” on page 66
•“
Set the copy paper...

4.Touch  Size.
The  Size menu appears.
5. Touch  Fit to Page .
6. Touch  Done.
Resize an original using custom settings
You can use your own custom settings to reduce or enlarge a copy of a document.
To set a custom size from the control panel
1.Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Touch  Copy.
The  Copy Menu  appears.
4. Touch  Size.
The  Size menu appears.
5. Touch  Custom 100% .
The  Custom 100%  menu...

Shift the left margin
You can shift the left margin of the copies by using the Margin Shift option. This helps
in binding or 3-hole punching for the copies produced. The HP All-in-One shifts the image
on the copies produced 0.95 cm (3/8 inch) to the right.
NOTE: When the  Margin Shift  feature is enabled, the right side of the copy images
may be cropped.
To shift the margin for your copy from the control panel
1. Touch  Copy.
The  Copy Menu  appears.
2. Change copy settings on the HP All-in-One to...