HP Photosmart 428 User Manual

–Live View Setup: Select to turn the Live View option for the camera to Live
View On or Live View Off. This determines whether the camera displays a
live image or not when you first turn the camera on. Live View is functional
only when the camera is undocked.
–Date/Time: Select to change the date and time on the camera.
–USB Configuration: Select to set the camera to appear as a Digital
Camera or as a Disk Drive when directly connected to a computer through a
USB cable. When the camera is in the camera...

2Getting Ready to Print
Before you can begin printing, there are some easy procedures you need to become
familiar with:
●Loading paper (see Loading Paper)
●Inserting print cartridges (see Inserting Print Cartridges)
●Connecting the camera (see Connecting the Camera)
You must load paper, insert a print cartridge, and connect a camera with images in its
internal memory or on its memory card before you can print.
Loading Paper
Learn how to choose the right paper for your print job and how to load it into...

Loading Your Paper
Paper loading tips:
●You can print on photo paper, index cards, or L-size cards.
●Before loading paper, slide out the paper-width guide to make room for the paper.
●Load only one type and size of paper at a time. Do not mix paper types or sizes in
the In tray.
●Do not load more than 10 sheets of 10 x 30 cm (4 x 12 inches) photo paper for
panoramic printing (possible only when printing from a computer). Loading more
than ten sheets can cause paper feed problems.
1In tray
2Paper-width...

Inserting Print Cartridges
Your HP Photosmart 420 series GoGo Photo Studio can print in color and black-and-
white. HP provides different types of print cartridges so you can choose the best
cartridge for your project. The cartridge number varies by country/region. Choose the
correct cartridge number for your country/region.
NoteThe cartridge numbers you can use with this printer appear on the back
cover of the printed Printer Users Manual. If you have already used the printer
several times, you can also...

Remove the Pink Tape:
Do Not Touch Here
Prepare the printer and cartridge:
1. Make sure the power is on and you have removed the cardboard from inside the
printer.
2. Open the print cartridge access door of the printer.
3. Remove the bright pink tape from the cartridge.
Insert the cartridge:
1. If you are replacing a cartridge, push down and pull outward on the cartridge in
the cradle to remove it.
2. Hold the replacement cartridge with the label on top. Slide the cartridge at a slight
upward angle into...

Align the cartridge:
1. Load paper in the In tray and press OK.
2. Follow the onscreen instructions to align the cartridge.
See Aligning the Print Cartridge.
Whenever you remove a print cartridge from the printer, store it in a print cartridge
protector. The cartridge protector keeps the ink from drying out. Storing the cartridge
improperly can cause the cartridge to malfunction.
In some countries/regions the cartridge protector is not included with the printer, but
comes with the HP Gray Photo cartridge...

Dock the camera on the printer:
1. Open the camera dock cover, if necessary.
2. Hold the camera so the camera Image Display faces you and the bottom of the
camera is down.
3. Make sure the camera is turned off.
4. Press the camera into the dock so that the connector tab in the camera dock
plugs into the connector slot on the bottom of the camera.
5. In most cases, docking the camera turns on both the printer and the camera. If it
does not, press the On button on the printer control panel.
NoteWhile the...

3Printing Basics
The HP Photosmart 420 series GoGo Photo Studio lets you produce amazing prints
without even going near a computer. After setting up the printer using the setup
instructions that came in the box, you are just a few steps away from printing your
images. This section describes:
●Printing from the Docked Camera
●Printing from Other Devices
NoteIn the following instructions, always use the buttons on the printer
control panel, unless instructed otherwise. Also note that most camera buttons...

Viewing images on a TV
You can attach the HP Photosmart 420 series to a television monitor to view and
select the images that you want to print.
To view images on a television
1. Connect the printer to the television monitor by using the supplied video cable.
2. Turn the television monitor on and change the television setting to receive input
from the HP Photosmart GoGo Photo Studio. For more information, see the user
manual that came with the television.
3. Press the Video button on the printer control...

NoteDo not undock the camera while printing. If you undock the camera
while printing, all print jobs are cancelled.
To print the current image:
1. Press 
 or  to browse to the image you want to print.
2. Press Print once for each copy of the current image you want to print. Press
Cancel to cancel the current print job.
To print only new images:
NoteNew images are images taken since the last time the camera was
docked.
1. Press OK to display the Print Menu.
2. Press
 to select Print New, then press OK.
3....