HP Officejet 7500A E910 User Manual

3.Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild glass
cleaner. Dry the glass with a dry, soft, lint-free cloth.
CAUTION:Use only glass cleaner to clean the scanner glass. Avoid cleaners
that contain abrasives, acetone, benzene, and carbon tetrachloride, all of which
can damage the scanner glass. Avoid isopropyl alcohol because it can leave
streaks on the glass.
CAUTION:Do not spray the glass cleaner directly on the glass. If too much glass
cleaner is applied, the...

If you have lines or dust appearing on scanned documents or faxes, clean the plastic strip
in the ADF.
To clean the rollers or separator pad
1.Remove all originals from the document feeder tray.
2.Lift the automatic document feeder cover (1).
This provides easy access to the rollers (2) and separator pad (3).
3
1
2
1Automatic document feeder cover
2Rollers
3Separator pad
3.Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess
liquid from the cloth.
4.Use the damp cloth to...

To clean the plastic strip inside the automatic document feeder
Use these instructions to clean the plastic strip inside the ADF.
1.Turn off the printer and unplug the power cord. For more information, see 
Turn off the
printer.
NOTE:Depending how long the printer is unplugged, the date and time might
be erased. You might need to reset the date and time later, when you plug the
power cord back in.
2.Lift the cover of the automatic document feeder until it stops, and then gently pry the
cover to release...

3.Continue lifting the automatic document feeder cover to the vertical position.
4.Lift the automatic document feeder mechanism.
5.Clean the plastic strip with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION:Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the plastic strip, since they can damage it. Do not place or spray liquid directly on
the plastic strip. The liquid might seep inside and damage the printer.
Chapter 1
30 Get started
 

6.Gently lower the automatic document feeder mechanism to avoid dislodging the
plastic strip, and then close the cover of the automatic document feeder.
7.Plug in the power cord, and then turn on the printer.
NOTE:If you still see dust or lines on scans after cleaning the plastic strip, you
may need to order a new plastic strip. For more information, see 
www.hp.com/
support.
Turn off the printer
Turn the printer off by pressing the  (power) button located on the printer. Wait until the
power light turns...

2Print
Most print settings are automatically handled by the software application. Change the
settings manually only when you want to change print quality, print on specific types of
paper, or use special features. For more information about selecting the best print media
for your documents, see 
Select print media.
Choose a print job to continue:
Print documents
Print brochures
Print on envelopes
Print photos
Print on special and custom-size paper
Print borderless documents
Print documents
NOTE:With...

Print documents (Windows)
1.Load paper in the tray. For more information, see Load media.
2.On the File menu in your software application, click Print.
3.Make sure the printer you want to use is selected.
4.To change settings, click the option that opens the printer Properties dialog box.
Depending on your software application, this option might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5.Change the paper orientation on the Layout tab, and paper source, media type, paper...

5.Change the paper orientation on the Layout tab, and paper source, media type, paper
size, and quality settings on the Paper/Quality tab. To print in black and white, click
the Advanced tab, and then change the Print in Grayscale option.
6.Click OK.
7.Click Print or OK to begin printing.
Print brochures (Mac OS X)
1.Load paper in the tray. For more information, see Load media.
2.From the File menu in your software application, click Print.
3.Make sure the printer you want to use is selected.
4.Click...

6.Click the Paper/Quality tab, and then select the appropriate envelope type from the
Paper Size drop-down list.
TIP:You can change more options for the print job by using the features
available on the other tabs in the dialog box.
7.Click OK, and then click Print or OK to begin printing.
Print on envelopes (Mac OS X)
1.Load envelopes in the tray. For more information, see Load media.
2.From the File menu in your software application, click Print.
3.Make sure the printer you want to use is selected....

4.Click Paper Type/Quality from the pop-up menu (located below the Orientation
setting), and then select the following settings:
•Paper Type: The appropriate photo paper type
•Quality: Best or Maximum dpi
NOTE:Click the blue disclosure triangle next to the Printer selection to access
these options.
5.Select the appropriate Photo Fix options:
•Off: applies no HP Real Life Technologies to the image.
•Basic: automatically focuses the image; moderately adjusts image sharpness.
6.To print the photo in black...