HP LaserJet P4015n User Manual

Stapler Stacker submenu
This menu appears only when an optional stapler/stacker is attached.
ItemValuesExplanation
STAPLESNONE
ONE-LEFT-ANGLEDSelect whether all jobs should be stapled. If you select ONE-
LEFT-ANGLED, all jobs are stapled. The default is NONE.
STAPLES OUT STOP
CONTINUESelect the option to stop or continue printing when the stapler
is out of staples. The default is STOP.
MBM-5 (multi-bin mailbox) submenu
This menu appears only when an optional 5-bin mailbox is attached....

I/O submenu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetdirect print server, you can configure basic networking parameters by
using this submenu. You can also configure these and other parameters through HP Web Jetadmin or
the embedded Web server.
ItemValuesExplanation
I/O TIMEOUT5 to 300Select the I/O timeout period in seconds.
Use this setting to adjust timeout for the best performance. If
data from other ports...

Menu itemSub-menu itemSub-menu itemValues and Description
SUBNET MASK: The subnet mask for the printer,
where m is a value from 0 to 255.
DEFAULT GATEWAY: The IP address of the gateway
or router used for communications with other networks.
  DEFAULT IPSpecify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
AUTO IP: A link-local IP address 169.254.x.x...

Menu itemSub-menu itemSub-menu itemValues and Description
 PROXY SERVER Specifies the proxy server to be used by embedded
applications in the product. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you might need to contact your
Internet Service Provider (ISP) for...

Menu itemSub-menu itemSub-menu itemValues and Description
SECURITYPRINT SEC PAGE YES: Prints a page that contains the current security
settings on the HP Jetdirect print server.
NO*: A security settings page is not printed.
SECURE WEB For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS Required: For secure, encrypted
communications, only HTTPS access is accepted. The
print server will appear as a...

Menu itemSub-menu itemSub-menu itemValues and Description
Select YES to choose this test, or NO to not choose it.
  DATA PATH TESTThis test helps to identify data path and corruption
problems on an HP postscript level 3 emulation
product. It sends a predefined PS file to the product,
However, the test is paperless, so the file does not
print.
Select YES to choose this test, or NO to not choose it.
  SELECT ALL TESTSSelect this item to run all the embedded tests. Select
YES to run all tests, or select NO...

Menu itemSub-menu itemSub-menu itemValues and Description
  PACKETS RECEIVEDShows the number of packets (0 - 65535) received from
the remote host since the most recent test was initiated
or completed.
  PERCENT LOSTShows the percent of ping test packets that were sent
with no response from the remote host since the most
recent test was initiated or completed.
  RTT MINShows the minimum detected roundtrip- time (RTT),
from 0 to 4096 milliseconds, for packet transmission
and response.
  RTT MAXShows the...

Resets submenu
Use this submenu to return settings to the defaults and change settings such as Sleep mode.
ItemValuesExplanation
RESTORE FACTORY
SETTINGSThere is no value to select.Performs a simple reset and restores most of the factory
(default) and network settings. This item also clears the input
buffer for the active I/O.
CAUTION:Restoring factory settings during a print job
cancels the print job.
SLEEP MODE ON
OFFTurns Sleep mode on or off. Using Sleep mode offers the
following advantages:...

Diagnostics menu
Administrators can use this submenu to isolate parts and to troubleshoot jam and print-quality issues.
ItemValuesExplanation
PRINT EVENT LOGThere is no value to select.Press OK to generate a list of the 50 most recent entries in the
event log. The printed event log shows error number, page
count, error code, and description or personality.
SHOW EVENT LOGThere is no value to select.Press OK to scroll through the contents of the event log at the
control panel, which lists up to the 50 most...

Service menu
The SERVICE menu is locked and requires a PIN for access. This menu is intended for use by authorized
service personnel.
38 Chapter 2   Control panelENWW