HP LaserJet P3005dn User Manual

							
Electrical specifications
WARNING!Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This can damage the device and void the product warranty.
Table C-3   Power requirements
Specification110-volt models220-volt models
Power requirements110 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current 7.0 Amps 4.0 Amps
Table C-4  Power consumption (average, in watts)
Device modelPrintingReadySleepOff
HP LaserJet P3005600 W9 W8.5 W0.2 W
HP LaserJet P3005d600 W9 W8.5 W0.2 W
HP LaserJet P3005n600 W9 W8.5 W0.2 W
HP LaserJet P3005dn600 W9 W8.5 W0.2 W
HP LaserJet P3005x600 W9 W8.5 W0.2 W
1Values subject to change. See www.hp.com/support/LJP3005  for current information.2Power numbers are the highest values  measured using all standard voltages.3Default time from Ready mode to Sleep = 30 minutes.4Heat dissipation in Ready mode = 35 BTU/hour.5Recovery time from Sleep to start of printing = less than 8.5 seconds.6Print speed is 35 ppm.
Acoustic specifications
Table C-5  Sound power and pressure level
Sound power levelDeclared per ISO 9296
PrintingLWAd= 6.5 Bels (A) [65 dB(A)]
ReadyEssentially Inaudible
Sound pressure levelDeclared per ISO 9296
PrintingLpAm=51 dB (A)
ReadyEssentially Inaudible
1Values subject to change. See www.hp.com/support/LJP3005  for current information.2Configuration tested: base device, simplex printing with A4 paper size.3Print speed is 35 ppm.
ENWW Electrical specifications 169
 
						

							
Operating environment
Table C-6  Necessary conditions
Environmental condition PrintingStorage/standby
Temperature (device and print cartridge)15° to 32.5°C (59° to 89°F)-20° to 40°C (-4° to 104°F)
Relative humidity 10% to 80% 10% to 90%
170 Appendix C   Specifications ENWW
 
						

							
D Regulatory information
This section contains the following regulatory information:
●
FCC regulations
●
Environmental product stewardship program
●
Declaration of conformity
●
Safety statements
ENWW 171
 
						

							
FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If this equipment is not installed a nd used in accordance with the instructions, it may
cause harmful interference to radio communications.  However, there is no guarantee that interference
will not occur in a particular insta llation. If this equipment does caus e harmful interference to radio or
television reception, which can be determined  by turning the equipment off and on, the user is
encouraged to try to correct the interference  by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase separation between equipment and receiver.
● Connect equipment to an outlet on a circuit differen
t from that to which the receiver is located.
● Consult your dealer or an experienced radio/TV technician.
NOTE
Any changes or modifications to the printer th at are not expressly approved by HP could
void the user’s authority  to operate this equipment.
Use of a shielded interface cable is required to co mply with the Class B limits of Part 15 of FCC
rules.
172 Appendix D   Regulatory information ENWW
 
						

							
Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several a ttributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in Ready and Sleep modes, which saves natural resources and
saves money without affecting the high performance of this product. This product qualifies for ENERGY
STAR® (Version 3.0), which is a voluntary program to encourage the development of energy-efficient
office products.
ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR
partner, Hewlett-Packard Company has determined  that this product meets ENERGY STAR Guidelines
for energy efficiency. For more information, see 
www.energystar.gov .
Toner consumption
Economode uses significantly less toner, whic h might extend the life of the print cartridge.
Paper use
This product’s manual/optional automatic duplex feature (two-sided printing, see Print on both sides of
the paper (Windows) or Print on both sides of the paper  (Mac)) and N-up printing (multiple pages printed
on one page) capability  can reduce paper usage and the resulting  demands on natural resources.
Plastics
Plastic parts over 25 grams are marked according to  international standards that enhance the ability to
identify plastics for recycling purpos es at the end of the product’s life.
HP LaserJet print supplies
It’s easy to return and recycle your empty HP LaserJ et print cartridges—free of charge—with HP Planet
Partners. HP is committed to pr oviding inventive, high-quality pr oducts and services that are
environmentally sound, from product design and ma nufacturing to distribution, operation and recycling
processes. We ensure your returned HP LaserJet  print cartridges are recycled properly, processing
them to recover valuable plastics an d metals for new products and diverting millions of tons of waste
from landfills. Since this cartridg e is being recycled and used in new ma terials, it will not be returned to
ENWW Environmental product stewardship program 173
 
						

							
you. Your empty HP LaserJet print cartridges are recycled responsibly when you participate in the
HP Planet Partners program. Thank you for being environmentally responsible!
In many countries/regions, this product’s printing supplies (for example, print cartridges) can be returned
to HP through the HP Printing  Supplies Returns and Recycling Program. An easy-to-use and free take
back program is available in more than 35 countr ies/regions. Multilingual program information and
instructions are included in every new HP  LaserJet print cartridge and supplies package.
HP print supplies returns and recycling program information
Since 1992, HP has offered HP LaserJet supplies retu rn and recycling free of charge. In 2004, HP Planet
Partners for LaserJet Supplies was available in 85 % of the world market where HP LaserJet supplies
are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most
HP LaserJet print cartridge boxes. Labels and bulk  boxes are also available through the Web site:
www.hp.com/recycle.
Use the label to return empty, original HP LaserJet pr int cartridges only. Please do not use this label for
non-HP cartridges, refilled or rem anufactured cartridges, or warranty re turns. Printing supplies or other
objects inadvertently sent to the HP Planet Partners program cannot be returned.
More than 10 million HP LaserJet  print cartridges were recycled globally in 2004  through the HP Planet
Partners supplies recycling  program. This record number represents  26 million pounds of print cartridge
materials diverted from landfills.  Worldwide, in 2004, HP recycled  an average of 59% of the print
cartridge by weight consisting primarily of plastic  and metals. Plastics and metals are used to make new
products such as HP products, plastic trays, and sp ools. The remaining materials are disposed of in an
environmentally responsible manner.
● U.S. returns.
 For a more environmentally responsible re turn of used cartridges and supplies, HP
encourages the use of bulk retu rns. Simply bundle two or more cartridges together and use the
single, pre-paid, pre-addressed UPS label that is  supplied in the package. For more information in
the U.S., call 1-800-340-2445 or visit the HP Web site at 
www.hp.com/recycle .
● Non-U.S. returns.
 Non-U.S. customers should visit the 
www.hp.com/recycle Web site for further
information regarding availability of the  HP Supplies Returns and Recycling Program.
Paper
This product is capable of using recycled papers w hen the paper meets the guidelines outlined in the
HP LaserJet Printer Family Print Media Guide . This product is suitable for the use of recycled paper
according to EN12281:2002.
Material restrictions
This HP product does not contain added mercury.
This HP product contains a battery that might require special handling at end-of-life. The batteries
contained in or supplied by Hewlett-Packard for this product include the following:
HP LaserJet P3005 device
TypeCarbon monofluoride lithium battery BR1632
Weight(1.5 g)
LocationOn formatter board
User-removableNo
174 Appendix D   Regulatory information ENWW
 
						

							
For recycling information, you can go to www.hp.com/recycle, or contact your local authorities or the
Electronics Industries Alliance: 
www.eiae.org .
Disposal of waste equipment by us ers in private households in the
European Union
This symbol on the product or on its packaging indica tes that this product must not be disposed of with
your other household waste. Instead, it is your re sponsibility to dispose of your waste equipment by
handing it over to a designated collection point for  the recycling of waste electrical and electronic
equipment. The separate collection and recycling of  your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it  is recycled in a manner that protects human health
and the environment. For more information about  where you can drop off your waste equipment for
recycling, please contact your local  city office, your household waste disposal service or the shop where
you purchased the product.
Material Safety Data Sheet (MSDS)
Material Safety Data Sheets (MSD S) for supplies containing chemical substances (for example, toner)
can be obtained by contacting the HP Web site at 
www.hp.com/go/msds  or www.hp.com/hpinfo/
community/environment/productinfo/safety .
For more information
To obtain information about these environmental topics:
●Product environmental profile sheet fo
r this and many related HP products
● HP’s commitment to the environment
● HP’s environmental management system
● HP’s end-of-life product re
turn and recycling program
● Material Safety Data Sheets
ENWW Environmental product stewardship program 175
 
						

							
Visit http://www.hp.com/go/environment or http://www.hp.com/hpinfo/community/environment/
productinfo/safety .
176 Appendix D   Regulatory information ENWW
 
						

							Declaration of conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet P3005 Series
Including: Optional 500-Sheet Input Tray Q7817A
   
Regulatory Model Number
3): BOISB-0406-02
Product Options: ALL
Print Cartridges: Q7551A / Q7551X
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11 IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR22:1993 +A1 +A2 / EN 55022:1994 +A1 +A2 - Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003
Supplementary Information:
The product herewith complies with the requirements of the EM C Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, an d carries
the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operati on is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device mu st accept any interference received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product is assigned a Regulator y model number. This number should not be confused with the mar keting
name or the product number(s).
Boise, Idaho,  USA
June 7, 2006
For regulatory topics only:
Australia Contact:  Product Regulations Mana ger, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact:  Your Local Hewlett-Packard Sales and Service  Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Strasse 140, D-71034, Böblingen (FAX:  +49-7031-14-3143)
USA Contact:  Product Regulations Manager, Hewlett-Packard Co mpany, PO Box 15, Mail Stop 160, Boise, ID 83707-0015 (Phone:
208-396-6000)
ENWW Declaration of conformity 177
 
						

							
Safety statements
Laser safety
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has
implemented regulations for laser products manufactured since August 1, 1976. Compliance is
mandatory for products marketed in the United States. Th e device is certified as a “Class 1” laser product
under the U.S. Department of Health and Human  Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safe ty Act of 1968. Since radiation emitted inside the
device is completely confined wi thin protective housings and external covers, the laser beam cannot
escape during any phase of normal user operation.
WARNING! Using controls, making adjustments, or  performing procedures other than those
specified in this user guide may result in exposure to hazardous radiation.
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
« Conforme à la classe B des no rmes canadiennes de compatibilité  électromagnétiques. « CEM ». »
VCCI statement (Japan)
Power cord statement (Japan)
EMI statement (Korea)
Laser statement for Finland
Luokan 1 laserlaite
Klass 1 Laser Apparat
178 Appendix D   Regulatory information ENWW