HP LaserJet P2015n User Manual

B Service and support
This appendix provides information on the following topics:
●
Hardware service
●
Extended warranty
●
Guidelines for repacking the printer
●
How to contact HP
ENWW 121
 

Hardware service
If your hardware fails during the warranty period, Hewlett-Packard offers the following support options:
●Hewlett-Packard repair services
: Hewlett-Packard will arrange to pick up the unit, repair it, and
return it to you within 5 to 10 business days, depending on your location.
● Hewlett-Packard authorized service provider
: You can return the unit to a local authorized
service dealer.
See 
How to contact HP  for more information.
Extended warranty
HP Care Pack provides coverage for...

Guidelines for repacking the printer
Use the following guidelines when repacking the printer:
●If possible, include print samples and 5 to 10 sheets of paper or other media that did not print
correctly.
● Remove and keep any DIMMs (memory) installed in the printer. See 
Install a memory DIMM 
 for
more information.
CAUTION Static electricity can damage DIMMs. When handling DIMMs, wear a grounded,
antistatic wrist strap.
● Remove and keep any cables, trays, and optional accessories installed in the...

124 Appendix B   Service and support ENWW
 

C Printer specifications
This appendix provides information on the following topics:
●
Environmental specifications
●
Acoustic emissions
●
Electrical specifications
●
Physical specifications
●
Printer capacities and ratings
●
Memory specifications
●
Port availability
ENWW 125
 

Environmental specifications
Operating environmentPrinter plugged into an AC outlet:
●Temperature: 10° C to 32.5° C (50° F to 90.5° F)
● Humidity: 20 to 80 percent (no condensation)
Storage environment Printer unplugged from an AC outlet:
●Temperature: 0° C to 40° C (32° F to 104° F)
● Humidity: 10 to 80 percent (no condensation)
NOTE
Values are based on preliminary data. See http://www.hp.com/support/ljP2015  for
current information.
Acoustic emissions
Declared per ISO 9296
Table C-1   HP LaserJet...

Electrical specifications
WARNING!Power requirements are based on the country/region where the printer is sold. Do
not convert operating voltages. Doing so might damage the printer and void the product warranty.
Table C-2   HP LaserJet P2015 printer
Power requirements (110)110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption●During printing (27 ppm): 325 watts (average)
● During Ready (Standby) and Sleep*: 7 Watts
* Instant-on fuser...

NOTEValues are based on preliminary data. See http://www.hp.com/support/ljP2015  for
current information.
NOTE The power reported is the highest value measured for monochrome printing using all
standard voltages.
NOTE The default time from Ready mode to Sleep mode and the recovery time from Sleep
mode to the start of printing is less than 10 seconds because of the instant-on fusing.
NOTE The heat dissipation in Ready mode is 25 BTU/hour.
128 Appendix C   Printer specifications ENWW
 

Physical specifications
Dimensions●Width: 350 mm (16.8 inches)
● Depth: 361 mm (14.2 inches)
● Height: 256 mm (10.0 inches)
Weight (3,000-page cartridge installed) HP LaserJet P2015 printer: 10.7 kg (23.6 lb)
NOTE
Values are based on preliminary data. See http://www.hp.com/support/ljP2015  for
current information.
ENWW Physical specifications 129
 

Printer capacities and ratings
Print speedHP LaserJet P2015 printer:
●27 ppm (letter), 26 ppm (A4)
● First page out in as few as 8.5 seconds
Tray 2 capacity250 sheets of regular weight 75 g/m2 (20 lb) paper
Tray 1 capacity50 sheets of regular weight 75 g/m2 ((20 lb)) paper
Optional input tray (tray 3) capacity250 sheets of regular weight 75 g/m2 (20 lb) paper
Top (face down) output bin capacity125 sheets of regular weight 75 g/m2 (20 lb) paper
Minimum paper size76 by 127 mm (3 by 5 inches)
Maximum paper...