HP LaserJet P2015n User Manual

A Accessory/Consumable addendum
This appendix provides information on the following topics:
●
Order supplies and accessories
●
10/100 networking print servers
●
HP print cartridges
●
DIMMs (memory or font)
ENWW 111
 

Order supplies and accessories
You can increase the printers capabilities with optional accessories and supplies. Use accessories and
supplies specifically designed for the HP LaserJet P2015 Series printers to ensure optimum
performance.
The HP LaserJet P2015 Series printer features Smart Printing Supplies. When you print a Configuration
page by pressing and holding the Go button for 5 seconds, a Supplies Status page prints after the
Configuration page. The Supplies Status page has information on the...

10/100 networking print servers
Table A-2  HP LaserJet P2015 Series printer
Item and descriptionOrder number
HP Jetdirect 175x fast-Ethernet external print server (value
line, USB port)
Must be Version C or later.J6035C
HP Jetdirect en3700 fast Ethernet print serverJ7942A
HP Jetdirect en2400 802.11g wireless external print server (full
featured, USB port) J7951A
ENWW 10/100 networking print servers 113
 

HP print cartridges
HP policy on non-HP print cartridges
Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new, refilled,
or remanufactured. Since they are not HP products, Hewlett-Packard cannot influence their design or
control their quality. Service or repair that is required as a result of using non-HP print cartridges will not
be covered under the printer warranty.
NOTEThe warranty does not apply to defects resulting from software, interfacing, or parts not...

DIMMs (memory or font)
The following sections provide instructions for installing, testing, and removing DIMMs.
Install a memory DIMM 
If you add memory (RAM only) to the HP LaserJet P2015 Series printer, you can print more complex
print jobs.
To install a DIMM, follow the instructions below:
CAUTIONHandling a DIMM (memory) without wearing a grounded, antistatic device might
damage the DIMM. Touch any metal part of the printer or other grounded metal before touching
the DIMM.
1. Use the power switch to...

4.With the gold contacts facing upward, insert the DIMM in the DIMM seat and press the DIMM body
in until the metal retaining pins click.
116 Appendix A   Accessory/Consumable addendum ENWW
 

5.Close the DIMM door.
6.Reconnect all printer cables and cords, and then use the power switch to turn on the printer.
Test the DIMM installation
To test the DIMM installation, print a configuration page, and check the Total Memory specified on the
page. See 
Printer information pages  for more information.
If all lights on the control panel are blinking, the DIMM installation was unsuccessful. Remove the DIMM
and reinstall it.
Remove a DIMM
To remove a DIMM, follow the instructions below:
CAUTION...

2.Open the DIMM door.
3.Unlock the DIMM retaining pins by pressing them outward.
118 Appendix A   Accessory/Consumable addendum ENWW
 

4.Grasp the DIMM on the bottom edge, and then remove the DIMM from the printer.
NOTE Store the DIMM in an antistatic bag.
5.Close the DIMM door.
6.Reconnect all printer cables and cords, and then use the power switch to turn on the printer.
ENWW DIMMs (memory or font) 119
 

120 Appendix A   Accessory/Consumable addendum ENWW