HP LaserJet P1006 User Manual

5.Insert the print cartridge in the device and close the print-cartridge door.
CAUTION:If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold 
water.  Hot water sets toner into the fabric.
NOTE:When toner is low, faded or light areas appear on the printed page. You might be able to 
temporarily improve print quality by  redistributing the toner. To redistribute the toner, remove the 
cartridge from the device and gently rock it from front to back.
ENWW Replace the...

Printer information pages
Demo page
The Demo page contains examples of text and graphics. To print the Demo page, select it from the
Print Information Pages drop-down on the Services tab in Printer Preferences.
Configuration page
The Configuration page lists current settings and properties of the device. It also contains a status log
report. To print a configuration page, do one of the following:
●Press the Go button when the device Ready light is on and no other jobs are printing (HP LaserJet
P1500...

Embedded Web server (HP LaserJet P1500 network models
only)
Use the embedded Web server (EWS) to view device and network status and to manage printing
functions from your computer.
●View device status information
●Determine the remaining life on all supplies and order new ones
●View and change the device default configuration settings
●View and change network configuration
You do not need to install any software on the computer. You only need to use one of these supported
Web browsers:
●Internet Explorer...

Information tab
The Information pages group consists of the following pages:
●Device Status displays the status of the device and HP supplies.
●Device Configuration shows the information found on the Configuration page.
●Supplies Status shows the status of HP supplies and provides supplies part numbers. To order
new supplies, click Order Supplies in the upper-right part of the window.
●Network Summary shows the information found on the Network Summary page.
Settings tab
Use this tab to configure the...

Manage supplies
For warranty information about these supplies, see Service and support on page 83.
Supplies life
HP LaserJet P1000 Series: Average yield for the replacement standard black print cartridge is 1500
pages in accordance with ISO/IEC 19752. Actual yield depends on specific use.
HP LaserJet P1500 Series: Average yield for the replacement standard black print cartridge is 2000
pages in accordance with ISO/IEC 19752. Actual yield depends on specific use.
Check and order supplies
Check the...

Recycling supplies:
●Place the used supply in the box in which the new supply arrived
●Complete the enclosed return label
●Send the used supply to HP for recycling
For complete information, see the recycling guide included with each new HP supply item. See 
Return
and recycling instructions on page 103 for more information about HPs recycling program.
Redistribute toner
If faded or light areas appear on the printed page, you might be able to temporarily improve print quality
by redistributing the toner....

Clean the device
Clean the outside of the device with a clean, damp cloth when necessary.
CAUTION:Do not use ammonia-based cleaners on or around the device.
During the printing process, paper, toner, and dust particles can accumulate inside the device. Over 
time, this buildup can cause print quality problems, su ch as toner specks or smearing, and paper jams. 
To correct and prevent these type s of problems, clean the print cartridge area and the device media 
path.
Clean the print-cartridge area
You do...

2.With a dry, lint-free cloth, wipe any residue from the paper-path area and the print-cartridge cavity.
3.Replace the print cartridge, and close the print-cartridge door.
48 Chapter 6   Managing and maintenance ENWW
 

4.Plug the power cord into the device.
Clean the device paper path
If you are experiencing toner specks or dots on the printouts, clean the paper path. This process uses 
a transparency to remove dust and toner from  the paper path. Do not use bond or rough paper.
NOTE:For best results use a sheet of transparency. If you do not have any transparencies, you can 
use copier-grade media (70 to 90 g/m2 (18 to 24 lb.)) that has a smooth surface.
1. Make sure that the device is idle and the Ready light is on....

Change the pickup roller
Normal use with good media causes wear. The use of poor media might require more frequent 
replacement of the pickup roller. 
If the device regularly mispicks (no media feeds thro ugh), you might need to change or clean the pickup 
roller. See Clean the pickup roller on page 53  to order a new pickup roller.
CAUTION:Failure to complete this procedure might damage the device.
1.Open the print-cartridge door, and remove the old print cartridge. See the recycling information 
inside...