HP LaserJet Enterprise M4555h User Manual

							OpenSSL
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL  PROJECT ``AS IS AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NO T LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICUL AR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTO RS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRA CT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE PO SSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software writte n by Eric Young ([email protected]). This product
includes software written by Tim Hudson ([email protected]).
ENWW OpenSSL 321
 
						

							Customer self-repair warranty service
HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and
allow for greater flexibility in performing defective  parts replacement. If during the diagnosis period,
HP identifies that the repair can be accomplished by the use of a CSR part, HP will ship that part
directly to you for replacement. There are two catego ries of CSR parts: 1) Parts for which customer self
repair is mandatory. If you request HP to replace  these parts, you will be charged for the travel and
labor costs of this service. 2) Parts for which customer self repair is optional. These parts are also
designed for Customer Self Repair. If, however, you  require that HP replace them for you, this may be
done at no additional charge under the type of warranty service designated for your product.
Based on availability and where geography permits,  CSR parts will be shipped for next business day
delivery. Same-day or four-hour de livery may be offered at an additional charge where geography
permits. If assistance is required, you can call the HP Technical Support Center and a technician will
help you over the phone. HP specifies in the mate rials shipped with a replacement CSR part whether a
defective part must be returned to HP. In cases where  it is required to return the defective part to HP,
you must ship the defective part back to HP within  a defined period of time, normally five (5) business
days. The defective part must be returned with th e associated documentation in the provided shipping
material. Failure to return the defective part may resu lt in HP billing you for the replacement. With a
customer self repair, HP will pay all shipping and  part return costs and determine the courier/carrier to
be used.
322 Appendix B   Service and support ENWW
 
						

							Customer support
Get telephone support for your country/region
Have the product name, serial number, date of purchase, and
problem description ready.Country/region phone numbers are on the flyer that was in
the box with your product or at 
www.hp.com/support/
.
Get 24-hour Internet support
www.hp.com/support/ljm4555mfp
Get support for products used with a Macintosh computer
www.hp.com/go/macosx
Download software utilities, drivers, and electronic
information
www.hp.com/support/ljm4555mfp_software
Order additional HP service or maintenance agreements
www.hp.com/go/carepack
Register your product
www.register.hp.com
ENWW Customer support 323
 
						

							324 Appendix B   Service and supportENWW
 
						

							C Product specifications
●Physical specifications
●
Power consumption, electrical specif ications, and acoustic emissions
●
Environmental specifications
ENWW 325
 
						

							Physical specifications
Table C-1  Product dimensions
Product HeightDepthWidth Weight
M4555 MFP
M4555h MFP 549 mm (21.6 in) 511 mm (20.1 in) 739 mm (29.1 in) 52.3 kg (115.3 lb)
52.5 kg (115.4 lb)
M4555f MFP 1010 mm (43.3 in) 719 mm (28.3 in) 780 mm (30.7 in) 75.0 kg (166.4 lb)
M4555fskm MFP 1010 mm (43.3 in) 719 mm (28.3 in) 909 mm (35.8 in) 87.5 kg (192.9 lb)
Power consumption, electrical specifications, and
acoustic emissions
See www.hp.com/support/ljm4555mfp for current information.
CAUTION:Power requirements are based on the country/region where the product is sold. Do not
convert operating voltages. This will damage the product and void the product warranty.
Environmental specifications
Environmental condition RecommendedAllowed
Temperature (product and print
cartridge) 17° to 27°C (62.6° to 80.6°F)
10° to 30°C (50° to 86°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Altitude N/A 0 m (0 ft) to 3000 m (9842 ft)
326 Appendix C   Product specifications ENWW
 
						

							D Regulatory information
●FCC regulations
●
Environmental product stewardship program
●
Declaration of conformity
●
Declaration of conformity (fax models)
●
Safety statements
●
Additional statements for telecom (fax) products
ENWW 327
 
						

							FCC regulations
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These li mits are designed to provide reasonable protection
against harmful interference in a residential inst allation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio co mmunications. Operation of this equipment in a
residential area is likely to cause  harmful interference in which case  the user will be required to correct
the interference at his own expense.
NOTE: Any changes or modifications to the printer th at are not expressly approved by HP could void
the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comp ly with the Class A limits of Part 15 of FCC rules.
328 Appendix D   Regulatory information ENWW
 
						

							Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing  quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our
environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in Ready or  Sleep mode, which saves natural resources and
saves money without affecting the high performance  of this product. Hewlett-Packard printing and
imaging equipment marked with the ENERGY STAR
® logo is qualified to the U.S. Environmental
Protection Agencys ENERGY STAR specifications  for imaging equipment. The following mark will
appear on ENERGY STAR qualified imaging products:
Additional ENERGY STAR qualified imaging  product model information is listed at:
www.hp.com/go/energystar
Toner consumption
EconoMode uses less toner, which might extend the life of the print cartridge. HP does not recommend
the full-time use of EconoMode. If EconoMode is  used full-time, the toner supply might outlast the
mechanical parts in the print cartridge. If print qu ality begins to degrade and is no longer acceptable,
consider replacing the print cartridge.
Paper use
This product’s automatic duplex feature (two-sided  printing) and N-up printing (multiple pages printed
on one page) capability can reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of the product’s life.
ENWW Environmental product stewardship program 329
 
						

							HP LaserJet print supplies
It’s easy to return and recycle your HP LaserJet print cartridges after use—free of charge—with
HP Planet Partners. Multilingual program inform ation and instructions are included in every new
HP LaserJet print cartridge and supplies package. Yo u help reduce the toll on the environment further
when you return multiple cartridges  together rather than separately.
HP is committed to providing inventive, high-quali ty products and services that are environmentally
sound, from product design and manufacturing to distribution, customer use and recycling. When you
participate in the HP Planet Partners program, we en sure your HP LaserJet print cartridges are recycled
properly, processing them to recover plastics and metals for new products and diverting millions of tons
of waste from landfills. Since this cartridge is bein g recycled and used in new materials, it will not be
returned to you. Thank you for being environmentally responsible!
NOTE: Use the return label to return original HP LaserJ et print cartridges only. Please do not use this
label for HP inkjet cartridges, non-HP cartridges,  refilled or remanufactured cartridges or warranty
returns. For information about recycling your HP inkjet cartridges please go to 
http://www.hp.com/
recycle .
Return and recycling instructions
United States and Puerto Rico
The enclosed label in the HP LaserJet toner cartridg e box is for the return and recycling of one or more
HP LaserJet print cartridges after use. Pl ease follow the applicable instructions below.
Multiple returns (more than one cartridge) 1.Package each HP LaserJet print cartridge in its original box and bag.
2. Tape the boxes together using strapping or pack aging tape. The package can weigh up to 31 kg
(70 lb).
3. Use a single pre-paid shipping label.
OR
1. Use your own suitable box, or reques t a free bulk collection box from 
www.hp.com/recycle or
1-800-340-2445 (holds up to 31 kg (70 lb) of HP LaserJet print cartridges).
2. Use a single pre-paid shipping label.
Single returns 1.Package the HP LaserJet print cart ridge in its original bag and box.
2. Place the shipping label on the front of the box.
Shipping For US and Puerto Rico HP LaserJet print cartridg e recycling returns, use the pre-paid, pre-addressed
shipping label contained in the box. To use the UP S label, give the package to the UPS driver during
your next delivery or pick-up, or take it to an  authorized UPS drop-off center. (Requested UPS Ground
pickup will be charged normal pick-up rates) For th e location of your local UPS drop-off center, call
1-800-PICKUPS or visit 
www.ups.com .
330 Appendix D   Regulatory information ENWW