HP Deskjet D2663 User Manual

Print cartridges in wrong slot 
Solution: Make sure the print cartridges are installed into the correct slots. If they 
are, remove and reinsert the print cartridges and verify that they are fully inserted and 
locked in place.
To make sure the print cartridges are installed correctly 
1. Make sure the product is turned on. 
2. Open the print cartridge door. 
The print carriage moves to the center of the product. 
3. Check to make sure you are using the correct print cartridges for your product. 
For...

5.Reinsert the print cartridge by sliding it forward into the slot on the right. Then 
push the print cartridge forward  until it clicks into the socket.
6.Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
NOTE:If the print cartridges are installed in the wrong slots and you cannot 
remove them from the product, contact HP support for service. 
Go to: www.hp.com/support . 
If prompted, choose your country/region, and then click  Contact HP for 
information on calling for technical...

4.Remove the black print cartridge from the slot on the right. Do not touch the ink 
nozzles or the copper-colored contacts. Check for possible damage to the copper- 
colored contacts or ink nozzles. 
Make sure the clear plastic tape has been removed. If it is still covering the ink 
nozzles, gently remove the clear plastic tape by using the pink pull tab. Make sure 
you do not remove the copper colored tape containing the electrical contacts.
1Copper-colored contacts
2Plastic tape with pink pull tab...

Make sure you have the following materials available: 
• Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart 
or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning print cartridges.
•Distilled, filtered, or bottled water (tap water might contain contaminants that can 
damage the print cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge 
contacts. These can damage the print cartridge or the product.
To clean the...

8.Hold the print cartridge with the HP logo on top, and insert the print cartridge back 
into the slot. Make sure you push the print cartridge in firmly until it snaps into 
place.
9. Repeat if necessary for the other print cartridge. 
10. Gently close the print cartridge door and plug the power cord into the back of the 
product. 
Cause: The print cartridge contacts needed to be cleaned. 
If this did not solve the issue, try the next solution.
Solution 3: Replace the print cartridges
Solution: Replace...

Chapter 5 
74 Solve a problem
Solve a problem
 

6 Stop the current job
To stop a print job from the HP Printer 
▲ Press Cancel on the control panel. If the print job does not stop, press Cancel again. 
It can take a few moments for printing to be cancelled.
Stop the current job 75
Stop the current job
 

Chapter 6 
76 Stop the current job
Stop the current job
 

7 Technical information
The technical specifications and international regulatory information for the HP Printer are provided in this section. 
For additional specifications, see  the printed documentation that came with the HP Printer. 
This section contains  the following topics: 
•Notice 
•Specifications
•Environmental product stewardship program 
•Regulatory notices
Notice
Hewlett-Packard Company notices
The information contained in this document is subject to change without notice. All rights...

Legal Paper: 70 to 90 g/m² (20 to 24 lb) 
Envelopes: 70 to 90 g/m² (20 to 24 lb)
Cards: Up to 200 g/m² (110-lb index maximum)
Photo Paper: Up to 280 g/m² (75-lb index maximum) 
Print resolution 
To find out about the printer resolution, see the printer software. For more information, see View the
print resolution . 
Cartridge yield 
Visit www.hp.com/go/learnaboutsupplies  for more information on estimated cartridge yields. 
Acoustic information 
If you have Internet access, you can get acoust ic...