HP Designjet Z3200ps 44 in User Manual

							You can rescale an image in the following ways:
●In the Windows driver dialog: go to the Features tab and look at the Resizing Options section.
◦The Print document on option adjusts the image size to the paper size you have selected.
For example, if you have selected ISO A2 as the paper size and you print an A3-sized image,
it is enlarged to fit the A2 paper. If the ISO A4 paper size is selected, the printer reduces a
larger image to fit the A4 size.
◦The % of actual size option enlarges the printable area of the original paper size (the page
minus the margins) by the percentage indicated, then adds the margins to create the output
paper size.
●In the Mac OS Print dialog (PostScript driver): select the Finishing panel, then Print document
on to adjust the image size to the paper size you have selected. For example, if you have selected
ISO A2 as the paper size and you print an A3-sized image, it is enlarged to fit the A2 paper. If the
ISO A4 paper size is selected, the printer reduces a larger image to fit the A4 size.
●In the Mac OS Print dialog (PCL3 driver): select the Paper Handling panel, then Scale to fit
paper size, and select the paper size to which you want to scale the image. If you want to increase
the size of the image, make sure that the Scale down only box is unchecked.
●On the Embedded Web Servers Submit Job page: select Advanced settings > Resizing.
◦The Standard and Custom options adjust the image size to the standard or custom paper
size you have selected. For example, if you have selected ISO A2 as the paper size and you
print an A3-sized image, it is enlarged to fit the A2 paper. If the ISO A4 paper size is selected,
the printer reduces a larger image to fit the A4 size.
◦The % of actual size option enlarges the printable area of the original paper size (the page
minus the margins) by the percentage indicated, then adds the margins to create the output
paper size.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Paper >
Resize.
If you are printing to a single sheet, you must ensure that the image can actually fit onto the sheet,
otherwise the image will be clipped.
Preview a print
Previewing a print on the screen allows you to check the layout of the print before printing, which may
help you to avoid wasting paper and ink on a bad print.
NOTE:If you load sheet paper without a skew check, the printer does not measure the length of the
sheet, so the print preview will not be a reliable guide to the final printout.
●To preview a print under Windows, you have the following options:
◦Use your applications print preview option.
ENWWPreview a print 51
Printing
 
						

							◦Check the Show preview before printing option, which you can find in the drivers Printing
Shortcuts tab, Paper/Quality tab and Features tab. The preview is shown before printing;
you can check the print settings and the layout of the image, and then click Print to proceed
with printing or Cancel to cancel the job.
●To preview a print under Mac OS, you have the following options:
◦Use your applications print preview option.
◦Click the Preview button at the bottom of the Print dialog box. This is the basic print preview
provided by Mac OS.
◦If you are using the PostScript driver, check the Show print preview option, which you can
find in the drivers Printing dialog, in the Finishing panel.
52 Chapter 5   PrintingENWW
Printing
 
						

							◦If you are using the PCL3 driver, click the PDF button at the bottom of the Print dialog box,
then click HP Print Preview. This provides a preview with more features, such as the ability
to change paper size, paper type and print quality, and to rotate the image. See below:
NOTE:HP Print Preview is not available if you are using Adobe InDesign, Adobe Illustrator,
Adobe Reader or Apple Aperture.
●To preview a print using the Embedded Web Server, select Basic settings > Hold for preview.
Print a draft
You can specify fast draft-quality printing in the following ways:
●In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section.
Move the print-quality slider to the extreme left (Speed).
●In the Mac OS Print dialog (PostScript driver): go to the Image Quality panel and move the
print-quality slider to the extreme left (Speed).
●In the Mac OS Print dialog (PCL3 driver): go to the Paper Type/Quality panel and select
Paper, then move the print-quality slider to the extreme left (Speed).
●On the Embedded Web Servers Submit Job page: select Basic settings > Print quality >
Standard options > Speed.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Print
quality > Select quality level > Fast.
ENWWPrint a draft 53
Printing
 
						

							NOTE:If you have set the print quality from your computer, that overrides the print-quality setting in
the front panel.
High-quality printing
You can specify high-quality printing in the following ways:
●In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section.
Move the print-quality slider to the extreme right (Quality).
●In the Mac OS Print dialog (PostScript driver): go to the Image Quality panel and move the
print-quality slider to the extreme right (Quality).
●In the Mac OS Print dialog (PCL3 driver): go to the Paper Type/Quality panel and select
Paper, then move the print-quality slider to the extreme right (Quality).
●On the Embedded Web Servers Submit Job page: select Basic settings > Print quality >
Standard options > Quality.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Print
quality > Select quality level > Best.
NOTE:If you have set the print quality from your computer, that overrides the print-quality setting in
the front panel.
If you have a high-resolution image
If your image has a resolution greater than the rendering resolution (which you can see in the drivers
Paper/Quality tab under Windows), print sharpness may be improved by selecting the Maximum
Detail option. This option is available only if you are printing on glossy paper and you have selected
Best print quality.
●In the driver dialog (Mac OS Print dialog): select custom instead of standard print-quality options,
then check the Maximum Detail box.
●On the Embedded Web Servers Submit Job page: select Basic settings > Print quality >
Custom. Set Quality level to Best, and Maximum detail to Yes.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Print
quality > Enable maximum detail.
NOTE:The Maximum Detail option results in slower printing with photo papers, but it does not
increase the amount of ink used.
If you have printhead problems
If your printheads have an excessive number of clogged nozzles (which may cause banding or white
streaks on your prints), print quality can be improved by selecting the More Passes option.
●In the driver dialog (Mac OS Print dialog): select custom instead of standard print-quality options,
then check the More Passes box.
●On the Embedded Web Servers Submit Job page: select Basic settings > Print quality >
Custom. Set Quality level to Best, and More passes to Yes.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Print
quality > Enable more passes.
54 Chapter 5   PrintingENWW
Printing
 
						

							NOTE:The More Passes option results in slower printing, but it does not increase the amount of ink
used.
TIP:Instead of using this option, consider using the Image Diagnostics Print to identify the printhead
or printheads that are causing the problem, and then clean or replace them. See 
The Image Diagnostics
Print on page 163.
If you are printing on photo paper
If you are printing on photo paper, you have the option of using the gloss enhancer, which improves
overall gloss quality and eliminates bronzing. There are three settings:
●Off: the gloss enhancer is not used.
●Economode: the gloss enhancer is used in inked areas of the image, but not in ink-free (white)
areas.
●Whole page: the gloss enhancer is used over the whole area of the defined page, including ink-
free areas.
If the print quality slider is set to Quality, the Gloss enhancer option is automatically set to Whole
page. To change this setting:
●In the driver dialog (Mac OS Print dialog): select custom instead of standard print-quality options,
then the Gloss enhancer option.
●On the Embedded Web Servers Submit Job page: select Basic settings > Print quality >
Custom > Gloss enhancer.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Print
quality > Gloss enhancer.
When Gloss enhancer is set to Whole page, you can further reduce bronzing, if necessary, by
increasing the amount of gloss enhancer used. This can be done from the HP Printer Utility: select
Color Center > Paper preset management > Change printing properties. The Gloss enhancer
amount can be adjusted to use more or less gloss enhancer. Using more gloss enhancer will reduce
bronzing and make the gloss more even across the page; however, it may cause blurriness or
graininess.
If you are printing on satin photo paper
If you are printing on satin photo paper, consider using HP Professional Satin Photo Paper, which can
offer:
●A wider color gamut
●Better black optical density
●Better PANTONE coverage
●A smoother surface
●Greater robustness
Print 16-bit color images
In a 16-bit RGB image, each of the three primary colors is encoded by a 16-bit value, so that each pixel
takes up 48 bits.
ENWWPrint 16-bit color images 55
Printing
 
						

							If you print your 16-bit color images through a printer driver, they will be reduced to 8-bit colors before
they reach the printer.
In order to send a 16-bit color image to the printer, you must save it as a 16-bit color TIFF or JPEG file,
then send the file directly to the printer without using a printer driver (see 
Using the Embedded Web
Server to print files on page 46). In this case, color management is done on the 16-bit color image, and
is therefore done more accurately. The image is still reduced to 8-bit colors for final printing.
TIP:Some applications refuse to save a 16-bit color image in JPEG format; others automatically
reduce it to 8-bit colors. A TIFF file generally gives a higher-quality result, and is recommended.
Print in gray shades
You can convert all colors in your image to shades of gray in the following ways:
●In your application program: many programs provide this option.
●In the Windows driver dialog: go to the Color tab and look at the Color Options section.
Select Print in Grayscale.
●In the Mac OS Print dialog (PostScript driver): go to the Color Options panel and select Print
In Grayscale.
●In the Mac OS Print dialog (PCL3 driver): go to the Paper Type/Quality panel and select
Color, then select Print In Grayscale.
●On the Embedded Web Servers Submit Job page: select Color > Color/Grayscale > Print in
grayscale.
See also 
Print a black-and-white photo for an exhibition (Photoshop, PS driver) on page 85.
Print with no margins
Printing with no margins (to the edges of the paper) is known as borderless printing. This can be done
only on rolls of glossy or satin paper.
In order to be sure of leaving no margins, the printer prints slightly past the edges of the paper. Any ink
deposited outside the paper is absorbed by the sponge situated in the platen.
NOTE:If you wish to print with no margins, you must ensure that your image will fill the page. If your
image is smaller than the page, it will not be automatically stretched.
You can request printing with no margins in the following ways:
●In the Windows driver dialog: select the Paper/Quality tab and press the Margins/Layout
button. Then select Borderless.
TIP:In the Windows PostScript driver, make sure you have made the right choice from the
Document size list. You should select a no margins document size when using the Borderless
option.
●In the Mac OS Page Setup dialog (PostScript driver): select a paper size name that includes
the words “no margins”. Then, in the Print dialog, select Finishing > Layout > Borderless.
●In the Mac OS Page Setup dialog (PCL3 driver): select a paper size name that includes the
words “no margins”. Then, in the Print dialog, select Paper Type/Quality > Layout >
Borderless.
●On the Embedded Web Servers Submit Job page: select Advanced settings > Paper >
Layout/Margins > Borderless.
56 Chapter 5   PrintingENWWPrinting
 
						

							When you select Borderless, you must also select one of the following Image Enlargement options:
●Automatically by Printer means that the printer automatically enlarges your image slightly
(normally by a few millimeters in each direction) in order to print over the edges of the paper.
●Manually in Application means that you must enlarge the image yourself in your application to a
size slightly larger than the actual paper size.
NOTE:If the first print job after loading paper is a borderless job, the printer may trim the leading edge
of the paper before printing.
At the end of a borderless print, the printer normally cuts the print slightly inside the image area to ensure
that the print is borderless. It then cuts the paper again so that no residual part of the image is included
in the next print. However, if the job is cancelled, or if there is white space at the bottom of the image,
only a single cut is made.
Rotate an image
By default, images are printed with their shorter sides parallel to the leading edge of the paper, like this:
You may wish to rotate your images by 90 degrees in order to save paper, like this:
You can do this in the following ways:
●In the Windows driver dialog: select the Features tab, then Rotate by 90 degrees.
●In the Mac OS Print dialog (PCL3 driver): select the HP Print Preview and then Rotate by 90
degrees.
●In the Mac OS Print dialog (PostScript driver): go to the Finishing panel and select Rotate by
90 degrees.
ENWWRotate an image 57
Printing
 
						

							●On the Embedded Web Servers Submit Job page: select Advanced settings > Roll
options > Rotate.
●
In the front panel: select the Setup menu icon 
, then Printing preferences > Paper >
Rotate.
NOTE:If rotation is set from your computer, it overrides the setting in the front panel.
NOTE:When you rotate a job, the page length may be increased to avoid clipping, because the top
and bottom margins are usually larger than the side margins.
NOTE:With either rolls or sheets, if you rotate an image to landscape whose original orientation was
portrait, the paper may not be wide enough for the image. For example, rotating a portrait D/A1-size
image on D/A1-size paper by 90 degrees will probably exceed the width of the paper. If you are using
the Embedded Web Server, the preview screen will confirm this with a warning triangle.
Autorotate
With some printer drivers, you can also select the Autorotate option, which will automatically rotate by
90 degrees any oversized portrait images in order to save paper.
Print with crop lines
Crop lines indicate where the paper should be cut to reduce it to your selected page size. You can print
crop lines automatically with individual jobs in the following ways:
●In the Windows driver dialog: select the Features tab, then Enable crop lines.
●In the Mac OS Print dialog (PostScript driver): go to the Finishing panel and select Enable
crop lines.
●In the Mac OS Print dialog (PCL3 driver): go to the Paper Type/Quality panel and select
Paper, then select Enable crop lines.
●On the Embedded Web Servers Submit Job page: select Advanced settings > Roll
options > Enable crop lines.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Paper >
Enable crop lines > On.
To print crop lines with nested jobs (see 
Nest jobs to save roll paper on page 59), you must select a
different option:
●In the Embedded Web Server: select Job management > Use crop lines when nest is
enabled > On.
●
Using the front panel: select the Setup menu icon 
, then Job management > Nest
options > Enable crop lines > On.
Print on sheet paper
To print on cut-sheet paper, first load the sheet of paper (see Load a single sheet on page 33). Then:
●With a Mac OS printer driver or with the PostScript driver for Windows: select a paper size
described as “for sheet paper”, then select Manual Feed as the Paper Source.
●With the PCL3 driver for Windows: select Manual Feed as the Paper Source.
58 Chapter 5   PrintingENWW
Printing
 
						

							Use paper economically
Here are some recommendations for making economical use of paper:
●If you are printing relatively small images or document pages, you can use nesting to print them
side by side instead of one after another. See 
Nest jobs to save roll paper on page 59.
●If you are printing multipage documents with relatively small pages, you can print up to 16 of them
on one sheet of paper. Use the Pages per sheet option in the Features tab (Windows driver) or
the Layout panel (Mac OS driver).
●You may be able to save some roll paper by using the following options:
◦In the Windows driver dialog: select the Features tab and then Remove Top/Bottom Blank
Areas and/or Rotate by 90 degrees or Autorotate.
◦In the Mac OS Print dialog (PostScript driver): select the Finishing panel, then Remove
Top/Bottom Blank Areas and/or Rotate by 90 degrees.
◦In the Mac OS Print dialog (PCL3 driver): select the Paper Type/Quality panel, then
Paper, then Remove Top/Bottom Blank Areas; and/or select HP Print Preview, then
Rotate by 90 degrees.
◦On the Embedded Web Servers Submit Job page: select Advanced settings > Roll
options > Remove top/bottom blank areas and/or Rotate.
●If you check the print preview on your computer before printing, you can sometimes avoid wasting
paper on prints containing obvious mistakes. See 
Preview a print on page 51.
Nest jobs to save roll paper
Nesting means automatically printing images or document pages side by side on the paper, rather than
one after the other. This is done to avoid wasting paper.
1.Direction of paper flow
2.Nesting off
3.Nesting on
4.Paper saved by nesting
ENWWUse paper economically 59
Printing
 
						

							When does the printer try to nest pages?
When both of the following are true:
●The printer is loaded with roll paper, not sheet paper.
●In the front panels Job Management menu or the Embedded Web Servers Job Management
page, Nest is On.
What pages can be nested?
All pages can be nested, unless they are so large that two of them cannot fit side by side on the roll, or
unless there are too many of them to fit into the remaining length of the roll. A single group of nested
pages cannot be split between two rolls.
Which pages qualify for nesting?
In order to be in the same nest, the individual pages must be compatible in all of the following ways:
●All pages must have the same print quality setting (Fast, Normal or Best).
●The Maximum Detail and More Passes settings must be the same on all pages.
●The Margins setting must be the same for all pages.
●The Mirror Image setting must be the same for all pages.
●The Rendering Intent must be the same for all pages.
●The Cutter setting must be the same for all pages.
●The color adjustment settings must be the same for all pages. See 
Color adjustment options
on page 78.
●Pages must be all color, or all grayscale: not some in color and some in grayscale.
●All pages must be in one or other of the following two groups (the two groups cannot be mixed in
the same nest):
◦CALS/G4
◦PostScript, PDF, TIFF, JPEG
●JPEG, TIFF and CALS/G4 pages with resolutions greater than 300 dpi may not nest with other
pages in some cases.
How long does the printer wait for another file?
So that the printer can make the best nest possible, it waits after a file has been received to check
whether a subsequent page will nest with it or with pages already in the queue. This waiting period is
the nest wait time; the factory default nest wait time is two minutes. This means that the printer waits
for up to two minutes after the last file is received before printing the final nest. You can change this
waiting time from the printers front panel: select the Setup menu icon 
, then Job management
options > Nest options > Select wait time. The available range is 1 to 99 minutes.
While the printer is waiting for nesting to time out, it displays the remaining time on the front panel. You
can print the nest (cancel the nest wait) by pressing the Form feed and cut key.
60 Chapter 5   PrintingENWWPrinting