HP Designjet T1300 1118 mm User Manual

							NOTE:Paper types that HP does not support may nevertheless be compatible with your printer.
Key to availability:
●(A) indicates papers available in Asia (excluding Japan)
●(C) indicates papers available in China
●(E) indicates papers available in Europe, the Middle East and Africa
●(J) indicates papers available in Japan
●(L) indicates papers available in Latin America
●(N) indicates papers available in North America
If the part number is not followed by parentheses, the paper is available in all regions.
Table 15-3  Roll paper
Paper type g/m² Length Width Part numbers
HP Bond and Coated Paper
HP Universal Bond Paper 80 45.7 m (150 ft) 594 mm (23.39 in) (A1) Q8003A (AJ)
610 mm (24 in) Q1396A
914 mm (36 in) Q1397A
1067 mm (42 in) Q1398A
91.4 m (300 ft) 594 mm (23.39 in) (A1) Q8004A (EAJ)
841 mm (33.11 in) (A0) Q8005A (EAJ)
HP Bright White Inkjet Paper 90 45.7 m (150 ft) 420 mm (16.54 in) (A2) Q1446A (J)
594 mm (23.39 in) (A1) Q1445A (EJ)
610 mm (24 in) C1860A (LN),
C6035A (AEJ)
841 mm (33.11 in) (A0) Q1444A (EJ)
914 mm (36 in) C1861A (LN),
C6036A (AEJ)
91.4 m (300 ft) 914 mm (36 in) C6810A
HP Recycled Bond Paper 80 45.7 m (150 ft) 420 mm (16.54 in) (A2) CG892A (E)
610 mm (24 in) CG889A (EN)
914 mm (36 in) CG890A (EN)
1067 mm (42 in) CG891A (EN)
HP Cockle-free Coated Paper 100 45.7 m (150 ft) 610 mm (24 in) CG883A (EN)
914 mm (36 in) CG884A (EN)
1067 mm (42 in) CG885A (EN)
ENWWHow to order supplies and accessories
143
 
						

							Table 15-3  Roll paper (continued)
Paper type g/m² Length Width Part numbers
HP Cockle-free Heavyweight Coated
Paper170 30.5 m (100 ft) 610 mm (24 in) CG886A (EN)
914 mm (36 in) CG887A (EN)
1067 mm (42 in) CG888A (EN)
HP Universal Coated Paper 95 45.7 m (150 ft) 610 mm (24 in) Q1404A (AEJN)
914 mm (36 in) Q1405A (AEJN)
1067 mm (42 in) Q1406A
HP Coated Paper 90 45.7 m (150 ft) 420 mm (16.54 in) (A2) Q1443A (J)
457 mm (18 in) Q7897A (EJN)
594 mm (23.39 in) (A1) Q1442A (EJ)
610 mm (24 in) C6019B
841 mm (33.11 in) (A0) Q1441A (EJ)
914 mm (36 in) C6020B
1067 mm (42 in) C6567B
91.4 m (300 ft) 914 mm (36 in) C6980A
HP Universal Heavyweight Coated
Paper120 30.5 m (100 ft) 610 mm (24 in) Q1412A (AEJN)
914 mm (36 in) Q1413A
1067 mm (42 in) Q1414A (AEJN)
HP Heavyweight Coated Paper 131 30.5 m (100 ft) 610 mm (24 in) C6029C (AEJN)
914 mm (36 in) C6030C
1067 mm (42 in) C6569C
67.5 m (225 ft) 1067 mm (42 in) Q1956A (EN)
HP Super Heavyweight Plus Matte
Paper210 30.5 m (100 ft) 610 mm (24 in) Q6626A (AEJN)
914 mm (36 in) Q6627A (AEJN)
1067 mm (42 in) Q6628A (AEJN)
HP Fluorescent Yellow Colored
Paper100 45.7 m (150 ft) 914 mm (36 in) Q1757A (E)
HP Yellow Colored Paper 92 45.7 m (150 ft) 914 mm (36 in) Q1760A (EN)
90 m (295.3 ft) 594 mm (23.39 in) (A1) Q6596A (E)
HP Technical Paper
HP Natural Tracing Paper 90 45.7 m (150 ft) 420 mm (16.54 in) (A2) Q1440A (J)
594 mm (23.39 in) (A1) Q1439A (J)
610 mm (24 in) C3869A
841 mm (33.11 in) (A0) Q1438A (J)
914 mm (36 in) C3868A
144 Chapter 15   AccessoriesENWW
 
						

							Table 15-3  Roll paper (continued)
Paper type g/m² Length Width Part numbers
HP Translucent Bond Paper 67 45.7 m (150 ft) 610 mm (24 in) C3860A (AJN)
914 mm (36 in) C3859A (LN)
HP Vellum Paper 75 45.7 m (150 ft) 610 mm (24 in) C3862A (N)
914 mm (36 in) C3861A (LN)
HP Film (Technical and Graphic)
HP Clear Film 174 22.9 m (75 ft) 610 mm (24 in) C3876A (AEJN)
914 mm (36 in) C3875A
HP Matte Film 160 38.1 m (125 ft) 610 mm (24 in) 51642A (AEJN)
914 mm (36 in) 51642B
HP White Matte Polyester Film 167 15.2 m (50 ft) 914 mm (36 in) Q1736A (AEN)
HP Vivid White Glossy Polyester
Film230 20.1 m (66 ft) 610 mm (24 in) CG827A (EJN)
1067 mm (42 in) CG828A (EJN)
HP Photographic Paper
HP Universal Instant-dry Gloss Photo
Paper190 30.5 m (100 ft) 610 mm (24 in) Q6574A
914 mm (36 in) Q6575A
1067 mm (42 in) Q6576A
HP Universal Instant-dry Semi-gloss
Photo Paper190 30.5 m (100 ft) 610 mm (24 in) Q6579A
914 mm (36 in) Q6580A
1067 mm (42 in) Q6581A
TIP:The dye inks used by your printer will fade very quickly on instant-dry photo papers. If you plan to display the prints for
more than two weeks, you should laminate them to achieve longer life.
HP Premium Plus Gloss Photo Paper 280 15.2 m (50 ft) 610 mm (24 in) Q5488A
HP Premium Plus Satin Photo Paper 280 15.2 m (50 ft) 457 mm (18 in) Q7920A
610 mm (24 in) Q5491A
HP Universal High-gloss Photo Paper 190 30.5 m (100 ft) 610 mm (24 in) Q1426A (AEJN)
914 mm (36 in) Q1427A (AEJN)
1067 mm (42 in) Q1428A (AEJN)
HP Universal Semi-gloss Photo Paper 190 30.5 m (100 ft) 610 mm (24 in) Q1420A (AEJN)
914 mm (36 in) Q1421A (AEJN)
1067 mm (42 in) Q1422A (AEJN)
HP RC Matte Photo Paper 200 30.5 m (100 ft) 914 mm (36 in) C7946A (AEN)
HP Backlit Material
HP Reverse Print Matte Backlit Film 160 22.9 m (75 ft) 914 mm (36 in) C7960A (AEJN)
HP Self-Adhesive Material and Laminate
ENWWHow to order supplies and accessories
145
 
						

							Table 15-3  Roll paper (continued)
Paper type g/m² Length Width Part numbers
HP Two-View Cling Film 240 22.9 m (75 ft) 914 mm (36 in) Q1914A (AEN)
1067 mm (42 in) Q1915A (AEN)
HP Self-adhesive Indoor Paper 170 22.9 m (75 ft) 610 mm (24 in) CG948A (EN)
914 mm (36 in) Q1733A (EJN)
HP Matte Adhesive-back
Polypropylene225 21.3 m (70 ft) 914 mm (36 in) Q1908A (AEN)
HP Colorfast Adhesive Vinyl 328 12.2 m (40 ft) 914 mm (36 in) C6775A
HP Adhesive-backed Polypropylene 128 50 m (164 ft) 914 mm (36 in) Q8044A (C)
1067 mm (42 in) Q8884A (C)
HP Everyday Adhesive Matte
Polypropylene180 22.9 m (75 ft) 610 mm (24 in) CG843A
914 mm (36 in) CG824A
1067 mm (42 in) CG825A
HP Self-adhesive Gloss
Polypropylene180 22.9 m (75 ft) 914 mm (36 in) Q8834A
1067 mm (42 in) Q8835A
Table 15-4  Sheet paper
Paper type g/m² Length Width Part numbers
HP Bond and Coated Paper
HP Coated Paper 90 610 mm (24 in) 457 mm (18 in) Q1961A (AEJN)
914 mm (36 in) 610 mm (24 in) Q1962A (AEN)
HP Photographic Paper
HP Premium Plus Gloss Photo Paper 280 483 mm (19 in) 330 mm (13 in) Q5486A
610 mm (24 in) 457 mm (18 in) Q5487A
HP Premium Plus Satin Photo Paper 280 483 mm (19 in) 330 mm (13 in) Q5489A
610 mm (24 in) 457 mm (18 in) Q5490A
Order accessories
The following accessories can be ordered for your printer.
Name Product number
HP Designjet PostScript Upgrade CN500B
HP Designjet External Hard Disk CN501A
HP Designjet T790 24-in Spindle CQ783A
HP Designjet T790 & T1300 44-in Spindle Q6709A
146 Chapter 15   AccessoriesENWW
 
						

							Name Product number
HP Designjet T790 24-in Stand Q6663A
HP Jetdirect 635n IPv6/IPsec Print Server J7961A
Introduction to the accessories
PostScript upgrade
The PostScript upgrade enables a T790 or T1300 to print the same file types that a T790 PS or T1300
PS can print. The PostScript upgrade can be plugged into the printers USB host.
Spindle
With extra spindles, you can change rapidly from one paper type to another.
Jetdirect print server
Jetdirect print servers support extra connectivity and security options beyond those provided in the
standard Ethernet interface built into the printer.
External hard disk (T790 PS and T1300 series)
The external hard disk replaces the printers internal hard disk as a repository of personal data (the job
queue, including temporary files, accounting and so on). The external hard disk can be removed and
stored in a secure place when the printer has been turned off.
You cannot use the external hard disk to share files between HP Designjets or to download files from
any computer to the printer.
For more information about the use of this accessory, see 
Troubleshooting on page 149.
CAUTION:The external hard disk has been designed to be used with HP Designjets only. It may be
damaged if you attempt to connect it to other devices.
NOTE:The printers USB device port is incompatible with the external hard disk. While the external
hard disk is connected, the USB device port is disabled, it is not recognized by your computers plug &
play subsystem and you cannot send jobs from your computer to the USB port. However, the USB host
port still works, and you can print jobs from a USB flash drive. If you require a point-to-point connection
between your computer and printer, without network infrastructure, please use a standard Ethernet
cable and install the driver from the HP Start-up Kit DVD in network mode.
Installation
1.Attach the hard disk holder to the left leg of the stand using the adhesive patch on the holder
(press firmly).
ENWWIntroduction to the accessories
147
 
						

							2.Place the external hard disk into the holder and connect the USB cable to it as shown.
3.Ensure that the printer is turned on.
4.
At the front panel, press 
, then , then Setup > External hard disk > Install
external hard disk.
5.The front panel displays Connect external hard disk or press Cancel to abort.
6.
Connect the other end of the USB cable to the rear of the printer where you see this symbol: 
7.The front panel displays Select Secure Disk Erase Level or Cancel to abort.
8.Choose the SDE level to be applied to the internal hard disk.
Secure Disk Erase provides three different levels of security:
●Insecure Mode or Non-Secure Fast Erase: All pointers to the information are erased.
The information itself remains on the hard disk until the disk space it occupies is needed for
other purposes, and it is then overwritten. While it remains on the disk, it is difficult for most
people to access, but may be accessed using software designed for the purpose. This is the
normal method in which files are erased on most computer systems; it is the fastest method
but the least secure.
●1-Pass Mode or Level 1: All pointers to the information are erased, and the information
itself is also overwritten with a fixed character pattern. This method is slower than Insecure
Mode/Non-Secure Fast Erase, but more secure. It may still be possible to access fragments of
the erased information by using special tools to detect residual magnetic traces.
●5-Pass Mode or Level 5: All pointers to the information are erased, and the information
itself is repetitively overwritten using an algorithm designed to eliminate any residual traces.
This is the slowest method, but the most secure; it meets the US Department of Defense
148 Chapter 15   AccessoriesENWW
 
						

							5220-22.m requirements for clearing and sanitization of disk media. This is the default
security level when using Secure Disk Erase. If you choose this level, the process can take up
to six hours.
9.The front panel displays Press OK to continue with the external hard disk installation
or Cancel to abort. The printer will restart during the process.
10.Press OK.
11.The front panel displays External hard disk installation in progress. Please do not
remove the USB disk. This process will take a few minutes and will reboot the
printer.
12.The printer restarts.
13.The front panel displays a message in English, but you should wait until it displays Ready.
If you connected the USB cable to the printer without using the front panel first, please follow these
steps:
1.The front panel displays External hard disk detected. Press OK to continue with
External Hard Disk Installation or Cancel to abort.
2.Press OK.
3.Go to step 
7 above.
Uninstallation
1.Ensure that the printer is turned on.
2.
At the front panel, press 
, then , then Setup > External hard disk > Uninstall
external hard disk.
3.Choose the Secure Disk Erase (SDE) level for the external hard disk.
4.The front panel displays External hard disk: Press OK to continue with External Hard
Disk uninstallation or Cancel to abort. The printer will restart.
5.Press OK.
6.The front panel displays External hard disk: Remove External Hard Disk.
7.Remove the external hard disk.
8.The printer restarts.
Troubleshooting
●The use of the external hard disk by any device other than an HP Designjet is not supported and
may cause severe damage to the hard disk, which is not covered by the warranty.
●If the external hard disk has been previously inserted into a different HP Designjet, the front panel
displays: External hard disk not valid for this machine. Power off, plug in the
correct hard disk and power on again.
ENWWIntroduction to the accessories
149
 
						

							If you use an external hard disk with one HP Designjet and then want to connect it to another:
◦If the HP Designjet has already had an external hard disk installed, you must uninstall it from
the first HP Designjet and then install it on the HP Designjet you want to use.
◦If the HP Designjet has no external hard disk installed, the installation process starts and the
contents of the external hard disk are deleted.
●The printers USB device port is incompatible with the external hard disk. While the external hard
disk is connected, the USB device port is disabled, it is not recognized by your computers plug &
play subsystem and you cannot send jobs from your computer to the USB port. However, the USB
host port still works, and you can print jobs from a USB flash drive.
If you require a point-to-point connection between your computer and printer, without network
infrastructure, please use a standard Ethernet cable and install the driver from the HP Start-up Kit
DVD in network mode.
If you later disconnect the external disk drive, and resume use of the internal disk drive, you will
be able to use the USB device port again.
●The external hard disk should not be removed while the printer is on. If you remove it, the front
panel displays the following error message (64:1:01): USB HDD accessory disconnected.
Please reconnect it and restart the printer.
If you turn on the printer while the external hard disk is not connected, the same message is
displayed.
●If the external hard disk is lost or broken, you must reconfigure the printer to use the internal hard
disk.
Turn on the printer. Wait until you see all of the fixed icons at the left and right of the front panel
displayed simultaneously. Then press three icons in the correct sequence: 
, then , then .
The front panel displays: Machine configured to use external hard disk. Do you want
to revert the configuration to internal hard disk? Press OK to continue.
Press OK.
The front panel displays: Machine reconfigured to use internal hard disk. Press OK to
reboot the machine.
Press OK. The printer restarts, and you can then use the printer with its internal hard drive.
150 Chapter 15   AccessoriesENWW
 
						

							16 Troubleshooting paper issues
●The paper cannot be loaded successfully
●
The paper type is not in the driver
●
The printer printed on the wrong paper type
●
An “on hold for paper” message (T1300 series)
●
The roll paper will not advance
●
The paper has jammed
●
A strip stays on the output tray and generates jams
●
The printer displays out of paper when paper is available
●
Prints do not fall neatly into the basket
●
The sheet stays in the printer when the print has been completed
●
The paper is cut when the print has been completed
●
The cutter does not cut well
●
The roll is loose on the spindle
●
Recalibrate the paper advance
ENWW151
 
						

							The paper cannot be loaded successfully
●Ensure no paper is loaded.
●Ensure the paper is far enough inside the printer, you should feel the printer grab the paper.
●Do not attempt to straighten the paper during the aligning process, unless instructed to do so by
the front-panel display. The printer automatically attempts to straighten the paper.
●The paper may be crumpled, or warped, or may have irregular edges.
General unsuccessful roll load issues
●If the paper does not load, the leading edge of the paper may not be straight or clean and needs
to be trimmed. Remove the initial 2 cm (1 in) from the roll and try again. This may be necessary
even with a new roll of paper.
●Ensure the roll ends are tight against the spindle ends.
●Check that the spindle is correctly inserted.
●Check that the paper is correctly loaded on the spindle, and that it loads over the roll towards
you.
●Check that all roll end plugs have been removed.
●Check that the paper is wound tightly on the roll.
●Do not touch the roll or paper at during the alignment process.
●When loading a roll on the T1300 series, the roll cover must remain open until the front panel
prompts you to close it.
●When loading the upper roll (the only roll on the T790), avoid inserting the paper into the cut
sheet slot.
152 Chapter 16   Troubleshooting paper issues ENWW